--UPS3P-MIB { iso(1) org(3) dod(6) internet(1) private(4)
--      enterprises(1) rcmib(2350) }


UPS3P-MIB DEFINITIONS ::= BEGIN
-- Title: PPC TOP LEVEL MIB
-- Date: January 07, 1994    Version 1.00
--
-- Date: January 17, 1994    Version 1.01
--
-- Date: July 14, 1994    Version 1.02


IMPORTS
	enterprises, IpAddress
		FROM RFC1155-SMI
	DisplayString
		FROM RFC1213-MIB
	OBJECT-TYPE
		FROM RFC-1212
	TRAP-TYPE
		FROM RFC-1215;

rcmib                           OBJECT IDENTIFIER ::=  { enterprises 2350 }

products                        OBJECT IDENTIFIER ::=  { rcmib 1 }

ups3p	                        OBJECT IDENTIFIER ::=  { products 1 }
--devTraps              			OBJECT IDENTIFIER ::= { products 2 }


ups3pAnalog                       OBJECT IDENTIFIER ::=  { ups3p 1 }
ups3pSwitch                       OBJECT IDENTIFIER ::=  { ups3p 2 }
ups3pControl                      OBJECT IDENTIFIER ::=  { ups3p 3 }
ups3pStrInfo                      OBJECT IDENTIFIER ::=  { ups3p 4 }
--ups3pRate	                      OBJECT IDENTIFIER ::=  { ups3p 5 }

-- the ups3pAnalog group

upsAutoRestartType OBJECT-TYPE
	SYNTAX INTEGER {
		automatic(0),
		manual(100)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS automatic restart type"
	::= { ups3pAnalog 21 }

--shutdownType OBJECT-TYPE
--	SYNTAX INTEGER {
--		shutdown_output_only(0),
--		Entire(100)
--	}
--	ACCESS read-only
--	STATUS mandatory
--	DESCRIPTION
--		"The current UPS shutdown type"
--	::= { ups3pAnalog 22 }

batCondition OBJECT-TYPE
	SYNTAX INTEGER {
		good(0),
		weak(100),
		replace(200)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current Battery Condition"
	::= { ups3pAnalog 23 }

batStatus OBJECT-TYPE
	SYNTAX INTEGER {
		OK(0),
		Low(100),
		Depleted(200)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current Battery Status"
	::= { ups3pAnalog 24 }

batChargeStatus OBJECT-TYPE
	SYNTAX INTEGER {
		floating(0),
		charging(100),
		resting(200),
		discharging(300)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current Battery Charge Status"
	::= { ups3pAnalog 25 }

secondOnBattery OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Senond On Battery in 1/100 Second"
	::= { ups3pAnalog 26 }

estimatedMinutesOnBat OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS estimated Minutes On Battery in 1/100 Minutes"
	::= { ups3pAnalog 27 }

estimatedCharge OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS estimated Charge in 1/100 %"
	::= { ups3pAnalog 28 }

batteryVol OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Battery voltage in 1/100 V"
	::= { ups3pAnalog 29 }

batteryCurrent OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Battery Current in 1/100 A"
	::= { ups3pAnalog 30 }

batteryTemperature OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Battery Temperature in 1/100 C"
	::= { ups3pAnalog 31 }

inputLineBads OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Input line bads in 1/100 line"
	::= { ups3pAnalog 32 }

inputLines OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Input line in 1/100 line"
	::= { ups3pAnalog 33 }

inputLine1Fre OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Input Line1 Fre in 1/100 Hz"
	::= { ups3pAnalog 34 }

inputLine1Vol OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Input Line1 voltage in 1/100 V"
	::= { ups3pAnalog 35 }

inputLine1Cur OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Input Line1 Current in 1/100 A"
	::= { ups3pAnalog 36 }

inputLine1Power OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Input Line1 Power in 1/100 KW"
	::= { ups3pAnalog 37 }

inputLine2Fre OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Input Line2 Fre in 1/100 Hz"
	::= { ups3pAnalog 38 }

inputLine2Vol OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Input Line2 voltage in 1/100 V"
	::= { ups3pAnalog 39 }

inputLine2Cur OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Input Line2 Current in 1/100 A"
	::= { ups3pAnalog 40 }

inputLine2Power OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Input Line2 Power in 1/100 KW"
	::= { ups3pAnalog 41 }

inputLine3Fre OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Input Line3 Fre in 1/100 Hz"
	::= { ups3pAnalog 42 }

inputLine3Vol OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Input Line3 voltage in 1/100 V"
	::= { ups3pAnalog 43 }

inputLine3Cur OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Input Line3 Current in 1/100 A"
	::= { ups3pAnalog 44 }

inputLine3Power OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Input Line3 Power in 1/100 KW"
	::= { ups3pAnalog 45 }

outputSource OBJECT-TYPE
	SYNTAX INTEGER {
		Normal(0),
		ByBattery(100),
		ByPass(200),
		Reduce(300),
		Boost(400),
		Other(500)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Output Source"
	::= { ups3pAnalog 46 }

outputFre OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Output Fre in 1/100 HZ"
	::= { ups3pAnalog 47 }

outputLines OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Output Lines in 1/100"
	::= { ups3pAnalog 48 }

outputLine1Vol OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Output Line1 voltage in 1/100 V"
	::= { ups3pAnalog 49 }

outputLine1Cur OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Output Line1 Current in 1/100 A"
	::= { ups3pAnalog 50 }

outputLine1Power OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Output Line1 Power in 1/100 KW"
	::= { ups3pAnalog 51 }

outputLine1Load OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Output Line1 Load in 1/100 %"
	::= { ups3pAnalog 52 }

outputLine2Vol OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Output Line2 voltage in 1/100 V"
	::= { ups3pAnalog 53 }

outputLine2Cur OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Output Line2 Current in 1/100 A"
	::= { ups3pAnalog 54 }

outputLine2Power OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Output Line2 Power in 1/100 KW"
	::= { ups3pAnalog 55 }

outputLine2Load OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Output Line2 Load in 1/100 %"
	::= { ups3pAnalog 56 }

outputLine3Vol OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Output Line3 voltage in 1/100 V"
	::= { ups3pAnalog 57 }

outputLine3Cur OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Output Line3 Current in 1/100 A"
	::= { ups3pAnalog 58 }

outputLine3Power OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Output Line3 Power in 1/100 KW"
	::= { ups3pAnalog 59 }

outputLine3Load OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Output Line3 Load in 1/100 %"
	::= { ups3pAnalog 60 }

bypassFre OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Bypass Fre in 1/100 HZ"
	::= { ups3pAnalog 61 }

bypassLines OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Bypass Lines in 1/100"
	::= { ups3pAnalog 62 }

bypassLine1Vol OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Bypass Line1 voltage in 1/100 V"
	::= { ups3pAnalog 63 }

bypassLine1Cur OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Bypass Line1 Current in 1/100 A"
	::= { ups3pAnalog 64 }

bypassLine1Power OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Bypass Line1 Power in 1/100 W"
	::= { ups3pAnalog 65 }

bypassLine2Vol OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Bypass Line2 voltage in 1/100 V"
	::= { ups3pAnalog 66 }

bypassLine2Cur OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Bypass Line2 Current in 1/100 A"
	::= { ups3pAnalog 67 }

bypassLine2Power OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Bypass Line2 Power in 1/100 W"
	::= { ups3pAnalog 68 }

bypassLine3Vol OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Bypass Line3 voltage in 1/100 V"
	::= { ups3pAnalog 69 }

bypassLine3Cur OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Bypass Line3 Current in 1/100 A"
	::= { ups3pAnalog 70 }

bypassLine3Power OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Bypass Line3 Power in 1/100 W"
	::= { ups3pAnalog 71 }

testResult OBJECT-TYPE
	SYNTAX INTEGER {
		NoTest(0),
		TestPass(100),
		TestInProgress(200),
		GeneralTestFail(300),
		BatteryTestFail(400),
		DeepBatteryTestFail(500)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Test result"
	::= { ups3pAnalog 72 }

outputTotalPower OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS output Total Power in 1/100 W"
	::= { ups3pAnalog 73 }

batteryCap OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS battery capability in 1/100 %"
	::= { ups3pAnalog 74 }

upsFaultId OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The current UPS Fault ID in 1/100"
	::= { ups3pAnalog 75 }

-- the ups3pSwitch group
temperatureTooHigh OBJECT-TYPE
	SYNTAX INTEGER  {
		normal(0),
		occur(1)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Temperature too High!"
	::= { ups3pSwitch 17 }

inputFault OBJECT-TYPE
	SYNTAX INTEGER  {
		normal(0),
		occur(1)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Input Fault!"
	::= { ups3pSwitch 18 }

outputFault OBJECT-TYPE
	SYNTAX INTEGER  {
		normal(0),
		occur(1)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Output Fault!"
	::= { ups3pSwitch 19 }

OverLoad OBJECT-TYPE
	SYNTAX INTEGER  {
		normal(0),
		occur(1)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Over Load!"
	::= { ups3pSwitch 20 }

bypassFault OBJECT-TYPE
	SYNTAX INTEGER  {
		normal(0),
		occur(1)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Bapass Fault!"
	::= { ups3pSwitch 21 }

outputShutdown OBJECT-TYPE
	SYNTAX INTEGER  {
		normal(0),
		occur(1)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Output Shutdown"
	::= { ups3pSwitch 22 }

upsShutdown OBJECT-TYPE
	SYNTAX INTEGER  {
		normal(0),
		occur(1)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"UPS Shutdown!"
	::= { ups3pSwitch 23 }

chargeFault OBJECT-TYPE
	SYNTAX INTEGER  {
		normal(0),
		occur(1)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Battery charge Fault!"
	::= { ups3pSwitch 24 }

systemShutdown OBJECT-TYPE
	SYNTAX INTEGER  {
		normal(0),
		occur(1)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"System Shutdown!"
	::= { ups3pSwitch 25 }

fanFault OBJECT-TYPE
	SYNTAX INTEGER  {
		normal(0),
		occur(1)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Fan Fault!"
	::= { ups3pSwitch 26 }

fuseFault OBJECT-TYPE
	SYNTAX INTEGER  {
		normal(0),
		occur(1)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Fuse Fault!"
	::= { ups3pSwitch 27 }

generalFault OBJECT-TYPE
	SYNTAX INTEGER  {
		normal(0),
		occur(1)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Gereral Fault!"
	::= { ups3pSwitch 28 }

autoRestart OBJECT-TYPE
	SYNTAX INTEGER  {
		normal(0),
		occur(1)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"automatic Restart!"
	::= { ups3pSwitch 29 }

shutdownDelay OBJECT-TYPE
	SYNTAX INTEGER  {
		normal(0),
		occur(1)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Shutdown delay!"
	::= { ups3pSwitch 30 }

shutdownAtonce OBJECT-TYPE
	SYNTAX INTEGER  {
		normal(0),
		occur(1)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Shutdown at once!"
	::= { ups3pSwitch 31 }

uspsCommunication OBJECT-TYPE
	SYNTAX INTEGER  {
		normal(0),
		occur(1)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Communication status!"
	::= { ups3pSwitch 32 }

batteryFault OBJECT-TYPE
	SYNTAX INTEGER  {
		normal(0),
		occur(1)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"battery Fault!"
	::= { ups3pSwitch 33 }

batteryVolLow OBJECT-TYPE
	SYNTAX INTEGER  {
		normal(0),
		occur(1)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"battery voltage too low!"
	::= { ups3pSwitch 34 }

bypass OBJECT-TYPE
	SYNTAX INTEGER  {
		normal(0),
		occur(1)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Bypass!"
	::= { ups3pSwitch 35 }

otherFault OBJECT-TYPE
	SYNTAX INTEGER  {
		normal(0),
		occur(1)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Other Fault!"
	::= { ups3pSwitch 36 }

testInProgress OBJECT-TYPE
	SYNTAX INTEGER  {
		normal(0),
		occur(1)
	}
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"Now Testing!"
	::= { ups3pSwitch 37 }

-- the ups3pControl group
upsTest OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"0:cancle test; -1:Test till battery voltage low; other:test Some Time"
	::= { ups3pControl 1 }

upsShutdownDelay OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"0:cancle shutdown; other:Shutdown ups after delay UNIT:second"
	::= { ups3pControl 2 }

upsRestartDelay OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"Restart ups after delay UNIT:second"
	::= { ups3pControl 3 }

-- the ups3pStrInfo group
upsManufacturer  OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The UPS Manufacturer name (e.g. 'richcomm')."
	::= { ups3pStrInfo 1 }

upsModel  OBJECT-TYPE
	SYNTAX DisplayString
	ACCESS read-only
	STATUS mandatory
	DESCRIPTION
		"The UPS Model name (e.g. 'RC-600VA')."
	::= { ups3pStrInfo 2 }

upsVersion OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"The firmware revision of the UPS system"
	::= { ups3pStrInfo 3 }

upsRateInputVol OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"The Rate Input voltage of the UPS system"
	::= { ups3pStrInfo 4 }

upsRateCurrent OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"The Rate Current of the UPS system"
	::= { ups3pStrInfo 5 }

upsRateBatVol OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"The Rate battery voltage of the UPS system"
	::= { ups3pStrInfo 6 }

upsRateFre OBJECT-TYPE
	SYNTAX INTEGER
	ACCESS read-write
	STATUS mandatory
	DESCRIPTION
		"The Rate Frequency of the UPS system"
	::= { ups3pStrInfo 7 }

-- Traps

alarmAdd TRAP-TYPE
	ENTERPRISE ups3p
	DESCRIPTION
		 "SEVERE: Alarm occur!"
	::= 100

alarmRemove TRAP-TYPE
	ENTERPRISE ups3p
	DESCRIPTION
		 "SEVERE: Alarm cancel!"
	::= 101

END