repos_ecs/源数据/PC环境监控/MostDevice_94273/MostDevice/EA800.h

/************************************************* 
/* Copyright (C), 2010-2011,StoneU. Co., Ltd. 
/* File name:     EA800.h 
/* Author:        Zero.t
/* Version:       Ver1.0.0.1
/* Date:          2011-12-05
/* Description:   易事特EA系列 UPS,EA800/EA8602;
/* Others:        RS232,2400/8/1,无校验;
/* Function List: ###
/* History:		 
/* 特别说明:	  该协议,也适用科华三相UPS. 项目:安奚公安局
*************************************************/

#ifndef _EA800_UPS_HEAD__
#define _EA800_UPS_HEAD__

#pragma once
#include "CommInterface.h"

class CEA800:public CCommInterface
{
public:
	enum __ERRO_CODE_UPSSANTAK
	{
		ERR_CODE_EA800_COM_FAULT				= 50201	,				//设备串口通信故障
		ERR_CODE_EA800_COM_BUSY					    ,						//设备串口通信忙
		ERR_CODE_EA800_COM_READ_NO_DATA				,				//设备没有读到数据
		ERR_CODE_EA800_COM_READ_LEN_OVER				,			//设备读到数据长度超时限制
		ERR_CODE_EA800_COM_LRC_LOST					,					//设备lrc校验失败
		EER_CODE_EA800_COM_WRITE_DATA					,				//设备写串口错误
		EER_CODE_EA800_COM_REGNUM						,					//设备寄存器数
		ERR_CODE_EA800_COM_VARLEN					    ,					//设备变量长度非法
		ERR_CODE_EA800_COM_INVALIDRES			        ,				//设备无效应答
	};
#define  DEBUG_EA800 1

public:
	CEA800(char *szPath,char *szIniName,int nCommPort,int nAddr,int nRate,int nDataBit,int nStopBit,int nParity,int nInterval);
	~CEA800(void);

	BOOL EA800OpenComm(int nCommPort, int nAddr, int nRate, int nDataBit, int nStopBit, int nParity, int nInterval);

	int SendReadRequest(
		char   *szPath,							// 程序所在路径	
		char   *szIniName,						// 配置文件名称 
		int    nCommPort,						// 串行端口
		int    nAddr,							// 设备地址
		char   *szCmd,							// 请求命令
		char   *szMsg,							// 响应的值	
		int    nReversed1,						// 预留整形参数1接口
		int    nReversed2,						// 预留整形参数2接口
		int    nReversed3,						// 预留整形参数3接口
		int    nReversed4,						// 预留整形参数4接口
		int    nReversed5,						// 预留整形参数5接口
		float  fReversed1,						// 预留float参数1接口
		float  fReversed2,						// 预留float参数2接口	
		float  fReversed3,						// 预留float参数3接口	
		char   *szReversed1,					// 预留字符数组参数1接口	
		char   *szReversed2,					// 预留字符数组参数2接口	
		char   *szReversed3,					// 预留字符数组参数3接口	
		char   *szReversed4,					// 预留字符数组参数4接口	
		char   *szReversed5						// 预留字符数组参数5接口	
		);

protected:
	int GetDeviceParam(	int nAddr,CCommProcess *pComm,char *IniSendCMD,const int  &IniSendlen);	
	int Send_ReadDeviceData(int nAddr,CCommProcess *pComm, const char *IniSendCMD,const int &IniSendlen);
	int Recv_ReadDeviceData(int	nAddr,CCommProcess *pComm,char *szSendCMD);

private:
	int GetEA800_G1Msg( int nAddr,char *szSendCMD, char *szMsg,int &nIndex,int &nLen,char *szType,int startBit,int endBit );
	int GetEA800_G2Msg( int nAddr,char *szSendCMD, char *szMsg,int &nIndex,int &nLen,char *szType,int startBit,int endBit );
	int GetEA800_G3Msg( int nAddr,char *szSendCMD, char *szMsg,int &nIndex,int &nLen,char *szType,int startBit,int endBit );
	int GetEA800_Q1Msg( int nAddr,char *szSendCMD, char *szMsg,int &nIndex,int &nLen,char *szType,int startBit,int endBit );
	int GetEA800_FMsg( int nAddr,char *szSendCMD, char *szMsg,int &nIndex,int &nLen,char *szType,int startBit,int endBit );
	int GetEA800_GFMsg( int nAddr,char *szSendCMD,char *szMsg,int &nIndex,int &nLen,char *szType,int startBit,int endBit );


	void SetEA800_G1Msg( int nAddr, char *szSendCMD, char *pBuffer);
	void SetEA800_G2Msg( int nAddr, char *szSendCMD, char *pBuffer);
	void SetEA800_G3Msg( int nAddr, char *szSendCMD, char *pBuffer);
	void SetEA800_Q1Msg( int nAddr, char *szSendCMD, char *pBuffer);
	void SetEA800_FMsg( int nAddr, char *szSendCMD, char *pBuffer);
	void SetEA800_GFMsg( int nAddr, char *szSendCMD, char *pBuffer);

	void SimulationCommData();
	int StrLower(char *pSource, char *pDest);

private:
	BOOL m_dwOnlineTick;
	BOOL m_devOnline;
	HANDLE m_hSemComm;
	CRITICAL_SECTION m_csReadMsg;

	char m_szG1_Msg[MAX_RECE_MSG];
	char m_szG2_Msg[MAX_RECE_MSG];
	char m_szG3_Msg[MAX_RECE_MSG];
	char m_szQ1_Msg[MAX_RECE_MSG];
	char m_szF_Msg[MAX_RECE_MSG];
	char m_szGF_Msg[MAX_RECE_MSG];
};

#endif