repos_ecs/Client_1.0.0.5/IDE/AnalogSinglePropertyDlg.cpp

// AnalogPropertyDlg1.cpp : implementation file
//

#include "stdafx.h"
#include "IDE.h"
#include "AnalogSinglePropertyDlg.h"
#include "DlgSelectDev.h"
#include "StringOperation.h"
#include "DlgBitManager.h"
#include "SelectVariantDlg.h"
#include "DlgVarStatusManager.h"
#include "DlgDatePlan.h"
#include "Dlg_ShowMessage.h"

#ifdef _DEBUG
#define new DEBUG_NEW
#undef THIS_FILE
static char THIS_FILE[] = __FILE__;
#endif

/////////////////////////////////////////////////////////////////////////////
// CAnalogSinglePropertyDlg dialog


CAnalogSinglePropertyDlg::CAnalogSinglePropertyDlg(CWnd* pParent /*=NULL*/)
	: CDialog(CAnalogSinglePropertyDlg::IDD, pParent)
{
	//{{AFX_DATA_INIT(CAnalogSinglePropertyDlg)

	//}}AFX_DATA_INIT
	m_operation=EDIT;
	m_DDXFields.SetSize(50);

	m_nVarID = 0;
	m_nVarSaveNum=0;
	m_nVarSaveNumOld=0;
	m_nPrevRow = 0;
}


void CAnalogSinglePropertyDlg::DoDataExchange(CDataExchange* pDX)
{
	CDialog::DoDataExchange(pDX);
	//{{AFX_DATA_MAP(CAnalogSinglePropertyDlg)
	//}}AFX_DATA_MAP
	DDX_Control(pDX, IDC_COMBO_VAR_TYPE, m_cmbVarType);
	DDX_Control(pDX, IDC_COMBO_CODE_FUNC, m_cmbFuncCode);

	m_DDXFields.DDX(pDX);
}


BEGIN_MESSAGE_MAP(CAnalogSinglePropertyDlg, CDialog)
	//{{AFX_MSG_MAP(CAnalogSinglePropertyDlg)
	//}}AFX_MSG_MAP
	ON_BN_CLICKED(IDC_BTN_CANCEL, OnBnClickedBtnCancel)
	ON_BN_CLICKED(IDC_BTN_SAVE, OnBnClickedBtnSave)
	ON_BN_CLICKED(IDC_BTN_SEL_DEV, OnBnClickedBtnSelDev)
	ON_BN_CLICKED(IDC_BTN_SEL_REG, OnBnClickedBtnSelReg)
	ON_BN_CLICKED(IDC_BTN_SEL_BIT, OnBnClickedBtnSelBit)
	ON_CBN_SELENDOK(IDC_COMBO_VAR_TYPE, OnCbnSelendokComboVarType)
	ON_BN_CLICKED(IDC_BTN_SEL_ALARM_VAR1, OnBnClickedBtnSelAlarmVar)

	ON_BN_CLICKED(IDC_BTN_SET_STATUS1, OnBnClickedBtnSetStatus)
	ON_BN_CLICKED(IDC_BTN_DATE_PLAN, OnBnClickedBtnDatePlan)
	ON_BN_CLICKED(IDC_BTN_ADVANCED, OnBnClickedBtnAdvanced)
END_MESSAGE_MAP()

/////////////////////////////////////////////////////////////////////////////
// CAnalogSinglePropertyDlg message handlers

BOOL CAnalogSinglePropertyDlg::OnInitDialog() 
{
	CDialog::OnInitDialog();

	int i = 0;
	//排序所选的列号
	int nTemp;
	for( i=0;i<m_nArrayListID.GetCount();i++ )
	{
		for( int j=i+1;j<m_nArrayListID.GetCount();j++ )
		{
			if( m_nArrayListID[i]>m_nArrayListID[j] )  
			{
				nTemp = m_nArrayListID[i];
				m_nArrayListID[i] = m_nArrayListID[j];
				m_nArrayListID[j] = nTemp;
			}
		}
	}

	//CString str,s;
	//for( i=0;i<m_nArrayListID.GetCount();i++ )
	//{
	//	s.Format(" %d",m_nArrayListID[i] );
	//	str += s;
	//}
	//AfxMessageBox( str );

	i=0;

	m_DDXFields.m_pWnd=this;
	m_DDXFields.SetDBType( g_strDBType );

	i=0;
	m_DDXFields.ElementAt(i).Set(_T("id"), IDC_EDT_VAR_ID);
	m_DDXFields.ElementAt(i).m_description=g_strVarID;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_NUM;

	i=1;
	m_DDXFields.ElementAt(i).Set(_T( "uid" ),IDC_EDT_VAR_UID) ;
	m_DDXFields.ElementAt(i).m_description=g_strVarUid1;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_STR;

	i=2;
	m_DDXFields.ElementAt(i).Set(_T( "varname" ),IDC_EDT_VAR_NAME) ;
	m_DDXFields.ElementAt(i).m_description=g_strVarName1;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_STR;

	i=3;
	m_DDXFields.ElementAt(i).Set(_T( "description" ),IDC_EDT_DESC) ;
	m_DDXFields.ElementAt(i).m_description=g_strVarDesc;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_STR;

	i=4;
	m_DDXFields.ElementAt(i).Set(_T("vartypeid"), IDC_EDT_VAR_TYPE_ID);
	m_DDXFields.ElementAt(i).m_description=g_strVarTypeID;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_NUM;

	i=5;
	m_DDXFields.ElementAt(i).Set(_T("datalen"), IDC_EDT_VAR_DATA_LEN, _T("1"), false, false);
	m_DDXFields.ElementAt(i).m_description=g_strVarDataLen;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_NUM;

	i=6;
	m_DDXFields.ElementAt(i).Set(_T("ondesc"), IDC_EDT_ON_DESC);
	m_DDXFields.ElementAt(i).m_description=g_strOnDesc;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_STR;

	i=7;
	m_DDXFields.ElementAt(i).Set(_T("offdesc"), IDC_EDT_OFF_DESC);
	m_DDXFields.ElementAt(i).m_description=g_strOffDesc;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_STR;

	i=8;
	m_DDXFields.ElementAt(i).Set(_T("maxvalues"), IDC_EDT_MAX_VALUES, _T("0"));
	m_DDXFields.ElementAt(i).m_description=g_strMaxValues;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_NUM;

	i=9;
	m_DDXFields.ElementAt(i).Set(_T("minvalues"), IDC_EDT_MIN_VALUES, _T("0"));
	m_DDXFields.ElementAt(i).m_description=g_strMinValues;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_NUM;

	i=10;
	m_DDXFields.ElementAt(i).Set(_T("maxconvtrate"), IDC_EDT_MAX_SCALE, _T("0"));
	m_DDXFields.ElementAt(i).m_description=g_strMaxScale;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_NUM;

	i=11;
	m_DDXFields.ElementAt(i).Set(_T("minconvtrate"), IDC_EDT_MIN_SCALE, _T("0"));
	m_DDXFields.ElementAt(i).m_description=g_strMinScale;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_NUM;

	i=12;
	m_DDXFields.ElementAt(i).Set(_T("lowerlimit"), IDC_EDT_LOWER_LIMIT, _T("0"));
	m_DDXFields.ElementAt(i).m_description=g_strLowerLimit;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_NUM;

	i=13;
	m_DDXFields.ElementAt(i).Set(_T("upperlimit"), IDC_EDT_UPPER_LIMIT, _T("0"));
	m_DDXFields.ElementAt(i).m_description=g_strUpperLimit;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_NUM;

	i=14;
	m_DDXFields.ElementAt(i).Set(_T("normalstate"), IDC_EDT_NORMAL_STATE, _T("0"));
	m_DDXFields.ElementAt(i).m_description=g_strNormalState;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_NUM;

	i=15;
	m_DDXFields.ElementAt(i).Set(_T("setvalue"), IDC_EDT_SET_VALUE, _T("0"));
	m_DDXFields.ElementAt(i).m_description=g_strSetValue;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_NUM;

	i=16;
	m_DDXFields.ElementAt(i).Set(_T("rearm"), IDC_EDT_REARM, _T("0"));
	m_DDXFields.ElementAt(i).m_description=g_strRearm;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_NUM;

	i=17;
	m_DDXFields.ElementAt(i).Set(_T("offsets"), IDC_EDT_OFF_SET, _T("0"));
	m_DDXFields.ElementAt(i).m_description=g_strOffset;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_NUM;

	i=18;
	m_DDXFields.ElementAt(i).Set(_T("unit"), IDC_EDT_UNIT);
	m_DDXFields.ElementAt(i).m_description=g_strUint;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_STR;

	i=19;
	m_DDXFields.ElementAt(i).Set(_T("collectfrequence"), IDC_EDT_COLLECT_FREQ, _T("3"));
	m_DDXFields.ElementAt(i).m_description=g_strCollectFreq;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_NUM;

	i=20;
	m_DDXFields.ElementAt(i).Set(_T("coefficient"), IDC_EDT_COEF, _T("0"));
	m_DDXFields.ElementAt(i).m_description=g_strCoef;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_FLOAT;

	i=21;
	m_DDXFields.ElementAt(i).Set(_T("warnlevel"), IDC_EDT_ALARM_LEVEL);
	m_DDXFields.ElementAt(i).m_description=_T("告警级别");
	m_DDXFields.ElementAt(i).m_nDataType = DATA_NUM;

	i=22;
	m_DDXFields.ElementAt(i).Set(_T("readonly"), IDC_EDT_READ_WRITE);
	m_DDXFields.ElementAt(i).m_description=g_strReadWrite;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_BIT;

	i=23;
	m_DDXFields.ElementAt(i).Set(_T("issave"), IDC_EDT_SAVE_DATA);
	m_DDXFields.ElementAt(i).m_description=g_strSaveData;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_BOOL;

	i=24;
	m_DDXFields.ElementAt(i).Set(_T("realtimeflag"), IDC_EDT_COLLECT_THRAD_DATA);
	m_DDXFields.ElementAt(i).m_description=g_strCollectThreadData;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_BOOL;

	i=25;
	m_DDXFields.ElementAt(i).Set(_T("reccurve"), IDC_EDT_SAVE_CURVE);
	m_DDXFields.ElementAt(i).m_description=g_strSaveCurve;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_BOOL;

	i=26;
	m_DDXFields.ElementAt(i).Set(_T("isdde"), IDC_EDT_IS_DDE);
	m_DDXFields.ElementAt(i).m_description=g_strIsDDE;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_BOOL;

	i=27;
	m_DDXFields.ElementAt(i).Set(_T("registernum"), IDC_EDT_REG_NUM);
	m_DDXFields.ElementAt(i).m_description=g_strRegNum;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_NUM;

	i=28;
	m_DDXFields.ElementAt(i).Set(_T("funcid"), IDC_EDT_FUNC_ID);
	m_DDXFields.ElementAt(i).m_description=g_strFuncID;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_NUM;

	i=29;
	m_DDXFields.ElementAt(i).Set(_T("childid"), IDC_EDT_CHILD_ID);
	m_DDXFields.ElementAt(i).m_description=g_strChildID;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_NUM;

	i=30;
	m_DDXFields.ElementAt(i).Set(_T("var_item_id"), IDC_EDT_VAR_ITEM_ID);
	m_DDXFields.ElementAt(i).m_description=g_strItemID;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_NUM;

	i=31;
	m_DDXFields.ElementAt(i).Set(_T("snmpoid"), IDC_EDT_SNMP_OID);
	m_DDXFields.ElementAt(i).m_description=g_strSnmpOid;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_STR;

	i=32;
	m_DDXFields.ElementAt(i).Set(_T("fields"), IDC_EDT_SNMP_PUBLIC);
	m_DDXFields.ElementAt(i).m_description=g_strSnmpPublic;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_STR;

	i=33;
	m_DDXFields.ElementAt(i).Set(_T("devtypeid"), IDC_EDT_DEV_TYPE_ID);
	m_DDXFields.ElementAt(i).m_description=g_strDevTypeID;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_NUM;

	i=34;
	m_DDXFields.ElementAt(i).Set(_T("address"), IDC_EDT_VAR_START_ADDR);
	m_DDXFields.ElementAt(i).m_description=g_strVarStartAddr;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_NUM;

	i=35;
	m_DDXFields.ElementAt(i).Set(_T("rs232cmd"), IDC_EDT_RS232_CMD);
	m_DDXFields.ElementAt(i).m_description=g_strRs232Cmd;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_STR;

	i=36;
	m_DDXFields.ElementAt(i).Set(_T("rs232type"), IDC_EDT_RS232_TYPE);
	m_DDXFields.ElementAt(i).m_description=g_strRs232Type;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_STR;

	i=37;
	m_DDXFields.ElementAt(i).Set(_T("rs232index"), IDC_EDT_RS232_INDEX);
	m_DDXFields.ElementAt(i).m_description=g_strRs232Index;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_NUM;	

	i=38;
	m_DDXFields.ElementAt(i).Set(_T("identifytime"), IDC_EDT_IDENTIFY_TIME);
	m_DDXFields.ElementAt(i).m_description=g_strIndentifyTime;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_NUM;	

	i=39;
	m_DDXFields.ElementAt(i).Set(_T("redetecttime"), IDC_EDT_REDETECT_TIME);
	m_DDXFields.ElementAt(i).m_description=g_strRedectTime;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_NUM;	

	i=40;
	m_DDXFields.ElementAt(i).Set(_T("normalisnotice"), IDC_EDT_NORMAL_IS_NOTICE);
	m_DDXFields.ElementAt(i).m_description=g_strReturnNormalAlarm;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_BOOL;

	i=41;
	m_DDXFields.ElementAt(i).Set(_T("boolreserved1"), IDC_EDT_SHOW_CURR_VALUE);
	m_DDXFields.ElementAt(i).m_description=g_strShowCurrValue;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_BOOL;

	i=42;
	m_DDXFields.ElementAt(i).Set(_T( "strreserved1" ),IDC_EDT_ALARM_VAR_NAME) ;
	m_DDXFields.ElementAt(i).m_description=g_strAlarmVarName;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_STR;

	i=43;
	m_DDXFields.ElementAt(i).Set(_T("boolreserved2"), IDC_EDT_IS_NOTICE);
	m_DDXFields.ElementAt(i).m_description=g_strIsNotice;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_BOOL;

	i=44;
	m_DDXFields.ElementAt(i).Set(_T("boolreserved3"), IDC_EDT_IS_MODIFY);
	m_DDXFields.ElementAt(i).m_description=g_strIsModify;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_BOOL;

	i=45;
	m_DDXFields.ElementAt(i).Set(_T("intreserved1"), IDC_EDT_PARAM_INIT);
	m_DDXFields.ElementAt(i).m_description=g_strParamInit;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_NUM;

	i=46;
	m_DDXFields.ElementAt(i).Set(_T("intreserved2"), IDC_EDT_PARAM_MIN);
	m_DDXFields.ElementAt(i).m_description=g_strParamMin;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_NUM;

	i=47;
	m_DDXFields.ElementAt(i).Set(_T("intreserved3"), IDC_EDT_PARAM_MAX);
	m_DDXFields.ElementAt(i).m_description=g_strParamMax;
	m_DDXFields.ElementAt(i).m_nDataType = DATA_NUM;

	i=48;
	m_DDXFields.ElementAt(i).Set(_T( "strreserved2" ),IDC_EDT_ALARM_DESC) ;
	m_DDXFields.ElementAt(i).m_description="报警描述";
	m_DDXFields.ElementAt(i).m_nDataType = DATA_STR;

	i=49;
	m_DDXFields.ElementAt(i).Set(_T( "strreserved3" ),IDC_EDT_RESUME_DESC) ;
	m_DDXFields.ElementAt(i).m_description="恢复描述";
	m_DDXFields.ElementAt(i).m_nDataType = DATA_STR;
	//IDC_CHK_IS_NOTICE
	//IDC_EDT_IS_NOTICE

	ChangeCtrlInfo();

	UpdateData(TRUE);
	switch (m_operation)
	{
	case NEW:
		break;
	default:	
		if( m_sVarName=="" )
			m_DDXFields.ReadData(m_pSet);
		else
			if( !m_DDXFields.ReadData(m_sVarName) )
			{
				OnOK();
				return false;
			}
	break;
	}
	UpdateData(FALSE);

	InitCtrlInfo(m_operation);

	JudgePermit();

	if( m_operation==EDITMORE )
	{
		//保存没修改过的数据，多编辑时比较,修改过才保存
		GetVarForEditMoreOld();
		SetControlStatusForEditMore();
	}

	m_btnSetStatus.EnableWindow( false );
	if( m_operation!=EDIT )
	{
		m_btnDatePlan.EnableWindow( false );
	}

	SetWindowPos(NULL,0,0,605,265,SWP_NOMOVE);  
	//this->MoveWindow( 0,0,605,265 );//265

	return TRUE;  // return TRUE unless you set the focus to a control
	              // EXCEPTION: OCX Property Pages should return FALSE
}
void CAnalogSinglePropertyDlg::SetControlStatusForEditMore()
{
	//变量名
	GetDlgItem(IDC_EDT_VAR_NAME)->EnableWindow( false );
	GetDlgItem(IDC_BTN_SEL_DEV)->EnableWindow( false );
	//变量类型
	GetDlgItem(IDC_COMBO_VAR_TYPE)->EnableWindow( false );
	//变量数据长度
	GetDlgItem(IDC_EDT_VAR_DATA_LEN)->EnableWindow( false );
	//起始地址
	GetDlgItem(IDC_EDT_VAR_START_ADDR)->EnableWindow( false );

	//变量描述
	GetDlgItem(IDC_EDT_DESC)->EnableWindow( false );
	//开的描述
	GetDlgItem(IDC_EDT_ON_DESC)->EnableWindow( false );
	//关的描述
	GetDlgItem(IDC_EDT_OFF_DESC)->EnableWindow( false );
	//报警描述
	GetDlgItem(IDC_EDT_ALARM_DESC)->EnableWindow( false );
	//恢复描述
	GetDlgItem(IDC_EDT_RESUME_DESC)->EnableWindow( false );
	//读写权限
	GetDlgItem(IDC_RADIO_READ_ONLY)->EnableWindow( false );
	GetDlgItem(IDC_RADIO_WRITE)->EnableWindow( false );
	GetDlgItem(IDC_RADIO_READ_WRITE)->EnableWindow( false );

	//记载历史曲线记录
	GetDlgItem(IDC_CHK_SAVE_CURVE)->EnableWindow( false );
	//允许DDE访问
	GetDlgItem(IDC_CHK_IS_DDE)->EnableWindow( false );
	//选择变量
	GetDlgItem(IDC_BTN_SEL_ALARM_VAR1)->EnableWindow( false );

	//请求寄存器个数
	GetDlgItem(IDC_EDT_REG_NUM)->EnableWindow( false );
	//功能码
	GetDlgItem(IDC_COMBO_CODE_FUNC)->EnableWindow( false );
	//选择bit位信息...
	GetDlgItem(IDC_BTN_SEL_BIT)->EnableWindow( false );
	//Snmp对象OID
	GetDlgItem(IDC_EDT_SNMP_OID)->EnableWindow( false );
	//Snmp域
	GetDlgItem(IDC_EDT_SNMP_PUBLIC)->EnableWindow( false );
	//232 类型
	GetDlgItem(IDC_COMBO_RS232_TYPE)->EnableWindow( false );
	//232 命令
	GetDlgItem(IDC_COMBO_RS232_CMD)->EnableWindow( false );
	//232 数据索引
	GetDlgItem(IDC_COMBO_RS232_INDEX)->EnableWindow( false );
}
void CAnalogSinglePropertyDlg::InitRs232Combo()
{
	CHAR strFile[MAX_FILE_LENGTH + 1] = "";
	CString strDevUid;
	char szDllName[MAX_NAME_LENGTH + 1] = {0};
	char szIniName[MAX_NAME_LENGTH + 1] = {0};
	char szDevProtocolType[MAX_NAME_LENGTH + 1] = {0};
	char szCmd[MAX_NAME_LENGTH + 1] = {0};
	char szCmdType[MAX_NAME_LENGTH + 1] = {0};
	char szCmdIndex[MAX_NAME_LENGTH + 1] = {0};
	GetDlgItem(IDC_EDT_VAR_UID)->GetWindowText(strDevUid);

	CComboBox* pRs232Cmd = (CComboBox*)GetDlgItem(IDC_COMBO_RS232_CMD);
	CComboBox* pRs232Type = (CComboBox*)GetDlgItem(IDC_COMBO_RS232_TYPE);
	CComboBox* pRs232Index = (CComboBox*)GetDlgItem(IDC_COMBO_RS232_INDEX);

	pRs232Cmd->ResetContent();
	pRs232Type->ResetContent();
	pRs232Index->ResetContent();
	if( strDevUid.Compare("") )		// 只有当设备Uid不为空的情况，才能从ini文件读取Rs232类型命令
	{
		CDBInterface::GetInstancePtr()->GetDevInfo(
			(char *)(LPCTSTR)strDevUid,
			szDllName,
			szIniName,
			szDevProtocolType );

		if( strcmp(szDllName, "") != 0 )
		{
			CString str;
			if( strcmp(szIniName, "") != 0 )
			{
				str = szIniName;
				wsprintf(strFile, "%s\\config\\%s", g_strDirectory, szIniName);
			}
			else
			{
				str = szDllName;
				int nIndex = str.Find(".dll");
				if( nIndex == -1 )
				{
					wsprintf(strFile, "%s\\config\\%s.ini", g_strDirectory, szDllName);
				}
				else
				{
					str = str.Mid(0, str.GetLength() - 4);
					wsprintf(strFile, "%s\\config\\%s.ini", g_strDirectory, str);
				}
			}

			int nCmdCount;
			nCmdCount = GetPrivateProfileInt("CMD", "cmd-count", 0, strFile);
			CString strCmd;
			for( int i = 1; i < nCmdCount + 1; i++ )
			{
				strCmd.Format("cmd-%d", i);
				GetPrivateProfileString("CMD", 
					(char *)(LPCTSTR)strCmd, "", szCmd, sizeof(szCmd), strFile);
				if( strcmp(szCmd, "") != 0 )
				{
					pRs232Cmd->AddString(szCmd);
				}
			}
			
			GetDlgItem(IDC_EDT_RS232_CMD)->GetWindowText(str);
			if( str.Trim().Compare("") )
			{
				GetPrivateProfileString("CMD", 
					(char *)(LPCTSTR)str, "", szCmd, sizeof(szCmd), strFile);
				pRs232Cmd->SetWindowText(szCmd);
			}
			else
			{
				pRs232Cmd->SetCurSel(9);
			}

			int nCmdTypeCount;
			nCmdTypeCount = GetPrivateProfileInt("TYPE", "type-count", 0, strFile);
			CString strCmdType;

			for( int i = 1; i < nCmdTypeCount + 1; i++ )
			{
				strCmdType.Format("type-%d", i);
				GetPrivateProfileString("TYPE", 
					(char *)(LPCTSTR)strCmdType, "", 
					szCmdType, sizeof(szCmdType), strFile);	
				if( strcmp(szCmdType, "") != 0 )
				{
					pRs232Type->AddString(szCmdType);
				}
			}

			GetDlgItem(IDC_EDT_RS232_TYPE)->GetWindowText(str);
			if( str.Trim().Compare("") )
			{
				GetPrivateProfileString("TYPE", 
					(char *)(LPCTSTR)str, "", 
					szCmdType, sizeof(szCmdType), strFile);	
				pRs232Type->SetWindowText(szCmdType);
			}
			else
			{
				pRs232Type->SetCurSel(0);
			}

			int nCmdIndexCount;
			nCmdIndexCount = GetPrivateProfileInt("INDEX", "index-count", 0, strFile);
			CString strCmdIndex;

			for( int i = 1; i < nCmdIndexCount + 1; i++ )
			{
				strCmdIndex.Format("index-%d", i);
				GetPrivateProfileString("INDEX", 
					(char *)(LPCTSTR)strCmdIndex, "", 
					szCmdIndex, sizeof(szCmdIndex), strFile);	
				if( strcmp(szCmdIndex, "") != 0 )
				{
					pRs232Index->AddString(szCmdIndex);
				}
			}

			GetDlgItem(IDC_EDT_RS232_INDEX)->GetWindowText(str);
			if( str.Trim().Compare("") )
			{
				strCmdIndex.Format("index-%d", atoi(str) + 1);
				GetPrivateProfileString("INDEX", 
					(char *)(LPCTSTR)strCmdIndex, "", 
					szCmdIndex, sizeof(szCmdIndex), strFile);	
				pRs232Index->SetWindowText(szCmdIndex);
			}
			else
			{
				pRs232Index->SetCurSel(0);
			}
		}
	}
}

void CAnalogSinglePropertyDlg::InitCtrlInfo(int nType)
{
	m_btnSave.SubclassDlgItem(IDC_BTN_SAVE, this);
	m_btnSave.SetBitmaps(IDB_SAVE, RGB(255, 0, 255));
	m_btnSave.SetFlat(FALSE);
	m_btnSave.SetAlign(CButtonST::ST_ALIGN_HORIZ);

	m_btnCancel.SubclassDlgItem(IDC_BTN_CANCEL, this);
	m_btnCancel.SetBitmaps(IDB_DEL, RGB(255, 0, 255));
	m_btnCancel.SetFlat(FALSE);
	m_btnCancel.SetAlign(CButtonST::ST_ALIGN_HORIZ);

	m_btnDatePlan.SubclassDlgItem(IDC_BTN_DATE_PLAN, this);
	m_btnDatePlan.SetBitmaps(IDB_PLAN, RGB(192, 192, 192));
	m_btnDatePlan.SetFlat(FALSE);
	m_btnDatePlan.SetAlign(CButtonST::ST_ALIGN_HORIZ);

	m_btnSetStatus.SubclassDlgItem(IDC_BTN_SET_STATUS1, this);
	m_btnSetStatus.SetBitmaps(IDB_INTO, RGB(192, 192, 192));
	m_btnSetStatus.SetFlat(FALSE);
	m_btnSetStatus.SetAlign(CButtonST::ST_ALIGN_HORIZ);

	m_btnAdvanced.SubclassDlgItem(IDC_BTN_ADVANCED, this);
	m_btnAdvanced.SetBitmaps(IDB_EDIT, RGB(192, 192, 192));
	m_btnAdvanced.SetFlat(FALSE);
	m_btnAdvanced.SetAlign(CButtonST::ST_ALIGN_HORIZ);
	//GetDlgItem(IDC_EDT_COLLECT_FREQ)->SetWindowText("300");
	((CComboBox *)GetDlgItem(IDC_COMBO_ALARM_LEVEL))->SetCurSel(3);

	//((CButton*)GetDlgItem(IDC_RADIO_READ_ONLY))->SetCheck(TRUE);

	((CComboBox *)GetDlgItem(IDC_COMBO_CODE_FUNC))->SetCurSel(0);

	CHAR strSQLText[MAX_SQL_LENGTH + 1] = "";
	// 初始化变量类型下拉列表
	try
	{
		sprintf(strSQLText, "SELECT id, vartype FROM t_var_type");
		m_varTypeArray.Fill(strSQLText, _T("vartype"),_T("id"));

		m_cmbVarType.Attach(&m_varTypeArray, "");
		m_cmbVarType.Fill();
		m_cmbVarType.SetCurSel(0);
	}
	catch(_com_error *e)
	{
		CString Error = e->ErrorMessage();
		AfxMessageBox(e->ErrorMessage());
	}
	catch(...)
	{

	}

	// 初始化功能码下拉列表
	try
	{
		sprintf(strSQLText, "SELECT id, funcname FROM t_dev_func_code");
		m_funcCodeArray.Fill(strSQLText, _T("funcname"),_T("id"));

		m_cmbFuncCode.Attach(&m_funcCodeArray, "");
		m_cmbFuncCode.Fill();
		m_cmbFuncCode.SetCurSel(0);
	}
	catch(_com_error *e)
	{
		CString Error = e->ErrorMessage();
		AfxMessageBox(e->ErrorMessage());
	}

	CString str;
	GetDlgItem(IDC_EDT_READ_WRITE)->GetWindowText(str);
	if( !str.Compare("0") )
	{
		((CButton *)GetDlgItem(IDC_RADIO_READ_ONLY))->SetCheck(TRUE);
		((CButton *)GetDlgItem(IDC_RADIO_WRITE))->SetCheck(FALSE);
		((CButton *)GetDlgItem(IDC_RADIO_READ_WRITE))->SetCheck(FALSE);
	}
	else if( !str.Compare("1") )
	{
		((CButton *)GetDlgItem(IDC_RADIO_READ_ONLY))->SetCheck(FALSE);
		((CButton *)GetDlgItem(IDC_RADIO_WRITE))->SetCheck(TRUE);
		((CButton *)GetDlgItem(IDC_RADIO_READ_WRITE))->SetCheck(FALSE);
	}
	else if( !str.Compare("2") )
	{
		((CButton *)GetDlgItem(IDC_RADIO_READ_ONLY))->SetCheck(FALSE);
		((CButton *)GetDlgItem(IDC_RADIO_WRITE))->SetCheck(FALSE);
		((CButton *)GetDlgItem(IDC_RADIO_READ_WRITE))->SetCheck(TRUE);
	}

	GetDlgItem(IDC_EDT_SAVE_DATA)->GetWindowText(str);
	((CButton *)GetDlgItem(IDC_CHK_SAVE_DATA))->SetCheck(!str.Compare("TRUE") || !str.Compare("1") ? TRUE : FALSE );

	GetDlgItem(IDC_EDT_COLLECT_THRAD_DATA)->GetWindowText(str);
	((CButton *)GetDlgItem(IDC_CHK_THREAD_COLLECT_DATA))->SetCheck(!str.Compare("TRUE") || !str.Compare("1") ? TRUE : FALSE );

	GetDlgItem(IDC_EDT_SAVE_CURVE)->GetWindowText(str);
	((CButton *)GetDlgItem(IDC_CHK_SAVE_CURVE))->SetCheck(!str.Compare("TRUE") || !str.Compare("1") ? TRUE : FALSE );

	GetDlgItem(IDC_EDT_IS_DDE)->GetWindowText(str);
	((CButton *)GetDlgItem(IDC_CHK_IS_DDE))->SetCheck(!str.Compare("TRUE") || !str.Compare("1") ? TRUE : FALSE );
	
	GetDlgItem(IDC_EDT_NORMAL_IS_NOTICE)->GetWindowText(str);
	((CButton *)GetDlgItem(IDC_CHK_NORMAL_IS_NOTICE))->SetCheck(!str.Compare("TRUE") || !str.Compare("1") ? TRUE : FALSE );

	GetDlgItem(IDC_EDT_SHOW_CURR_VALUE)->GetWindowText(str);
	((CButton *)GetDlgItem(IDC_CHK_SHOW_CURR_VALUE))->SetCheck(!str.Compare("TRUE") || !str.Compare("1") ? TRUE : FALSE);

	GetDlgItem(IDC_EDT_IS_NOTICE)->GetWindowText(str);
	((CButton *)GetDlgItem(IDC_CHK_IS_NOTICE))->SetCheck(!str.Compare("TRUE") || !str.Compare("1") ? TRUE : FALSE);

	GetDlgItem(IDC_EDT_IS_MODIFY)->GetWindowText(str);
	((CButton *)GetDlgItem(IDC_CHK_IS_MODIFY))->SetCheck(!str.Compare("TRUE") || !str.Compare("1") ? TRUE : FALSE);

	if( nType == EDIT || nType == COPY )
	{
		CString strVarTypeID, strFuncID, strWarningLevel;
		CHAR szTypeName[MAX_DESC + 1] = {0};
		CHAR szFuncName[MAX_DESC + 1] = {0};

		GetDlgItem(IDC_EDT_VAR_TYPE_ID)->GetWindowText(strVarTypeID);
		GetDlgItem(IDC_EDT_FUNC_ID)->GetWindowText(strFuncID);
		GetDlgItem(IDC_EDT_ALARM_LEVEL)->GetWindowText(strWarningLevel);

		CDBInterface::GetInstancePtr()->GetVarTypeName( atoi(strVarTypeID), szTypeName );
		CDBInterface::GetInstancePtr()->GetFuncCodeName( atoi(strFuncID), szFuncName );

		GetDlgItem(IDC_COMBO_VAR_TYPE)->SetWindowText(szTypeName);
		GetDlgItem(IDC_COMBO_CODE_FUNC)->SetWindowText(szFuncName);
		GetDlgItem(IDC_COMBO_ALARM_LEVEL)->SetWindowText(strWarningLevel);

		InitRs232Combo();
	}
	else if( nType == NEW )
	{
		GetDlgItem(IDC_EDT_MAX_VALUES)->SetWindowText("0");
		GetDlgItem(IDC_EDT_MIN_VALUES)->SetWindowText("0");
		GetDlgItem(IDC_EDT_MAX_SCALE)->SetWindowText("0");
		GetDlgItem(IDC_EDT_MIN_SCALE)->SetWindowText("0");
		GetDlgItem(IDC_EDT_LOWER_LIMIT)->SetWindowText("0");
		GetDlgItem(IDC_EDT_UPPER_LIMIT)->SetWindowText("0");
		GetDlgItem(IDC_EDT_NORMAL_STATE)->SetWindowText("0");
		GetDlgItem(IDC_EDT_SET_VALUE)->SetWindowText("0");
		GetDlgItem(IDC_EDT_REARM)->SetWindowText("0");
		GetDlgItem(IDC_EDT_OFF_SET)->SetWindowText("0");
		GetDlgItem(IDC_EDT_COLLECT_FREQ)->SetWindowText("300");
		GetDlgItem(IDC_EDT_COEF)->SetWindowText("1");

		GetDlgItem(IDC_EDT_VAR_ITEM_ID)->SetWindowText("0");
		GetDlgItem(IDC_EDT_IDENTIFY_TIME)->SetWindowText("30");
		GetDlgItem(IDC_EDT_REDETECT_TIME)->SetWindowText("60");

		GetDlgItem(IDC_EDT_IS_NOTICE)->SetWindowText("1");
		GetDlgItem(IDC_EDT_IS_MODIFY)->SetWindowText("1");
		GetDlgItem(IDC_EDT_NORMAL_IS_NOTICE)->SetWindowText("1");
		GetDlgItem(IDC_EDT_SAVE_DATA)->SetWindowText("1");
		GetDlgItem(IDC_EDT_COLLECT_THRAD_DATA)->SetWindowText("1");

		((CButton *)GetDlgItem(IDC_CHK_SAVE_DATA))->SetCheck(TRUE);
		((CButton *)GetDlgItem(IDC_CHK_THREAD_COLLECT_DATA))->SetCheck(TRUE);
		((CButton *)GetDlgItem(IDC_CHK_NORMAL_IS_NOTICE))->SetCheck(TRUE);
		((CButton *)GetDlgItem(IDC_CHK_IS_NOTICE))->SetCheck(TRUE);
		((CButton *)GetDlgItem(IDC_CHK_IS_MODIFY))->SetCheck(TRUE);
		
		GetDlgItem(IDC_EDT_PARAM_INIT)->SetWindowText("30");
		GetDlgItem(IDC_EDT_PARAM_MIN)->SetWindowText("1");
		GetDlgItem(IDC_EDT_PARAM_MAX)->SetWindowText("100");
	}
}

void CAnalogSinglePropertyDlg::ChangeCtrlInfo()
{
	//UpdateData( true );
	if( ((CButton *)GetDlgItem(IDC_RADIO_READ_ONLY))->GetCheck() )
	{
		GetDlgItem(IDC_EDT_READ_WRITE)->SetWindowText("0");
	}
	else if( ((CButton *)GetDlgItem(IDC_RADIO_WRITE))->GetCheck() )
	{
		GetDlgItem(IDC_EDT_READ_WRITE)->SetWindowText("1");
	}
	else if( ((CButton *)GetDlgItem(IDC_RADIO_READ_WRITE))->GetCheck() )
	{
		GetDlgItem(IDC_EDT_READ_WRITE)->SetWindowText("2");
	}
	else
	{
		GetDlgItem(IDC_EDT_READ_WRITE)->SetWindowText("0");
	}

	if( ((CButton *)GetDlgItem(IDC_CHK_SAVE_DATA))->GetCheck() )
	{
		GetDlgItem(IDC_EDT_SAVE_DATA)->SetWindowText("1");
	}
	else
	{
		GetDlgItem(IDC_EDT_SAVE_DATA)->SetWindowText("0");
	}

	if( ((CButton *)GetDlgItem(IDC_CHK_THREAD_COLLECT_DATA))->GetCheck() )
	{
		GetDlgItem(IDC_EDT_COLLECT_THRAD_DATA)->SetWindowText("1");
	}
	else
	{
		GetDlgItem(IDC_EDT_COLLECT_THRAD_DATA)->SetWindowText("0");
	}

	if( ((CButton *)GetDlgItem(IDC_CHK_SAVE_CURVE))->GetCheck() )
	{
		GetDlgItem(IDC_EDT_SAVE_CURVE)->SetWindowText("1");
	}
	else
	{
		GetDlgItem(IDC_EDT_SAVE_CURVE)->SetWindowText("0");
	}

	if( ((CButton *)GetDlgItem(IDC_CHK_IS_DDE))->GetCheck() )
	{
		GetDlgItem(IDC_EDT_IS_DDE)->SetWindowText("1");
	}
	else
	{
		GetDlgItem(IDC_EDT_IS_DDE)->SetWindowText("0");
	}	

	if( ((CButton *)GetDlgItem(IDC_CHK_NORMAL_IS_NOTICE))->GetCheck() )
	{
		GetDlgItem(IDC_EDT_NORMAL_IS_NOTICE)->SetWindowText("1");
	}
	else
	{
		GetDlgItem(IDC_EDT_NORMAL_IS_NOTICE)->SetWindowText("0");
	}

	if( ((CButton *)GetDlgItem(IDC_CHK_SHOW_CURR_VALUE))->GetCheck() )
	{
		GetDlgItem(IDC_EDT_SHOW_CURR_VALUE)->SetWindowText("1");
	}
	else
	{
		GetDlgItem(IDC_EDT_SHOW_CURR_VALUE)->SetWindowText("0");
	}

	if( ((CButton *)GetDlgItem(IDC_CHK_IS_NOTICE))->GetCheck() )
	{
		GetDlgItem(IDC_EDT_IS_NOTICE)->SetWindowText("1");
	}
	else
	{
		GetDlgItem(IDC_EDT_IS_NOTICE)->SetWindowText("0");
	}

	if( ((CButton *)GetDlgItem(IDC_CHK_IS_MODIFY))->GetCheck() )
	{
		GetDlgItem(IDC_EDT_IS_MODIFY)->SetWindowText("1");
	}
	else
	{
		GetDlgItem(IDC_EDT_IS_MODIFY)->SetWindowText("0");
	}

	//UpdateData( false );
}

void CAnalogSinglePropertyDlg::InsertToVariantManager()
{
	CAnalog *pAnalog = new CAnalog();
	CString str = m_DDXFields.GetAt(0).m_value;
	int nTemp = -1;
	// 变量ID
	pAnalog->m_nVarID = atoi(str);

	// 变量UID
	pAnalog->m_strVarUID = m_DDXFields.GetAt(1).m_value;

	// 变量名称
	pAnalog->m_strName = m_DDXFields.GetAt(2).m_value;

	// 变量描述
	pAnalog->m_strDesc = m_DDXFields.GetAt(3).m_value;

	// 变量类型ID
	str = m_DDXFields.GetAt(4).m_value;
	pAnalog->m_nVarTypeID = atoi(str);

	// 变量数据长度
	str = m_DDXFields.GetAt(5).m_value;
	pAnalog->m_nDataLen = atoi(str);

	// 开的描述
	pAnalog->m_strOnDesc = m_DDXFields.GetAt(6).m_value;

	// 关的描述
	pAnalog->m_strOffDesc = m_DDXFields.GetAt(7).m_value;

	// 最大值
	pAnalog->m_nMaxValues = atoi(m_DDXFields.GetAt(8).m_value);

	// 最小值
	pAnalog->m_nMinValues = atoi(m_DDXFields.GetAt(9).m_value);

	// 最大转换比率
	pAnalog->m_nMaxConvtRate = atoi(m_DDXFields.GetAt(10).m_value);

	// 最小转换比率
	pAnalog->m_nMinConvtRate = atoi(m_DDXFields.GetAt(11).m_value);
	
	// 下限
	pAnalog->m_nLowerLimit = atoi(m_DDXFields.GetAt(12).m_value);

	// 上限
	pAnalog->m_nUpperLimit = atoi(m_DDXFields.GetAt(13).m_value);

	// 正常状态
	pAnalog->m_nNormalState = atoi(m_DDXFields.GetAt(14).m_value);

	// 设定值
	pAnalog->m_strSetValue = m_DDXFields.GetAt(15).m_value;

	// 校正值
	pAnalog->m_nRearm = atoi(m_DDXFields.GetAt(16).m_value);

	// 偏移量
	pAnalog->m_nOffset = atoi(m_DDXFields.GetAt(17).m_value);

	// 单位
	pAnalog->m_strUnit = m_DDXFields.GetAt(18).m_value;

	// 采集频率
	pAnalog->m_nCollectFreq = atoi(m_DDXFields.GetAt(19).m_value);

	// 转换系数
	pAnalog->m_fCoef = (float)atof(m_DDXFields.GetAt(20).m_value);

	// 告警级别
	pAnalog->m_nWaringLevel = atoi(m_DDXFields.GetAt(21).m_value);

	// 读写权限
	pAnalog->m_nPurview = atoi(m_DDXFields.GetAt(22).m_value);

	// 是否保存数值
	pAnalog->m_bIsSave = atoi(m_DDXFields.GetAt(23).m_value);

	// 是否实时采集数据
	pAnalog->m_bRealtimeFlag = atoi(m_DDXFields.GetAt(24).m_value);

	// 是否记录实时曲线
	pAnalog->m_bRecCurve = atoi(m_DDXFields.GetAt(25).m_value);

	// 是否允许DDE访问
	pAnalog->m_bIsDDE = atoi(m_DDXFields.GetAt(26).m_value);

	// 请求寄存器个数
	pAnalog->m_nRegNum = atoi(m_DDXFields.GetAt(27).m_value);

	// 功能码id
	pAnalog->m_nFuncCode = atoi(m_DDXFields.GetAt(28).m_value);

	// 寄存器子id
	pAnalog->m_nVarChildID = atoi(m_DDXFields.GetAt(29).m_value);

	// 位信息id
	pAnalog->m_nVarItemID = atoi(m_DDXFields.GetAt(30).m_value);

	// SNMP对象oid
	pAnalog->m_strSnmpOid = m_DDXFields.GetAt(31).m_value;
	
	// SNMP域
	pAnalog->m_strFields = m_DDXFields.GetAt(32).m_value;

	// 设备类型ID
	pAnalog->m_nDevID = atoi(m_DDXFields.GetAt(33).m_value);

	// 起始地址
	pAnalog->m_nRegStartAddr = atoi(m_DDXFields.GetAt(34).m_value);

	// Rs232请求命令
	pAnalog->m_strRs232Cmd = m_DDXFields.GetAt(35).m_value;

	// Rs232请求类型
	pAnalog->m_strRs232Type = m_DDXFields.GetAt(36).m_value;

	// Rs232数据索引
	pAnalog->m_nRs232Index = atoi(m_DDXFields.GetAt(37).m_value);

	// 辨別時間
	pAnalog->m_nIdentifyTime = atoi(m_DDXFields.GetAt(38).m_value);

	// 重新檢測時間
	pAnalog->m_nRedetectTime = atoi(m_DDXFields.GetAt(39).m_value);


	// 起始BIT位
	if( m_nStartBit >= 0 && m_nStartBit <= 64 )
	{
		pAnalog->m_nStartBit = m_nStartBit;
	}

	// 终止BIT位
	if( m_nEndBit >= 0 && m_nEndBit <= 64 )
	{
		pAnalog->m_nEndBit = m_nEndBit;
	}

	pAnalog->m_strReserved1 = m_DDXFields.GetAt(42).m_value;;
	//pAnalog->m_strReserved1 = "";
	pAnalog->m_strReserved2 = m_DDXFields.GetAt(48).m_value;
	pAnalog->m_strReserved3 = m_DDXFields.GetAt(49).m_value;
	pAnalog->m_strReserved4 = "";
	pAnalog->m_strReserved5 = "";
	pAnalog->m_strReserved6 = "";
	pAnalog->m_strReserved7 = "";
	pAnalog->m_strReserved8 = "";
	pAnalog->m_strReserved9 = "";
	pAnalog->m_strReserved10 = "";

	pAnalog->m_nReserved1 = atoi(m_DDXFields.GetAt(45).m_value);
	pAnalog->m_nReserved2 = atoi(m_DDXFields.GetAt(46).m_value);
	pAnalog->m_nReserved3 = atoi(m_DDXFields.GetAt(47).m_value);
	pAnalog->m_nReserved4 = 0;
	pAnalog->m_nReserved5 = 0;
	pAnalog->m_nReserved6 = 0;
	pAnalog->m_nReserved7 = 0;
	pAnalog->m_nReserved8 = 0;
	pAnalog->m_nReserved9 = 0;
	pAnalog->m_nReserved10 = 0;

	//pAnalog->m_bReserved1 = FALSE;
	if( atoi(m_DDXFields.GetAt(41).m_value) == 1 )
	{
		pAnalog->m_bReserved1 = TRUE;
	}
	else if( atoi(m_DDXFields.GetAt(41).m_value) == 0 )
	{
		pAnalog->m_bReserved1 = FALSE;
	}

	if( atoi(m_DDXFields.GetAt(43).m_value) == 1 )
	{
		pAnalog->m_bReserved2 = TRUE;
	}
	else if( atoi(m_DDXFields.GetAt(43).m_value) == 0 )
	{
		pAnalog->m_bReserved2 = FALSE;
	}

	//pAnalog->m_bReserved1 = FALSE;
	//pAnalog->m_bReserved2 = FALSE;
	pAnalog->m_bReserved3 = FALSE;
	pAnalog->m_bReserved4 = FALSE;
	pAnalog->m_bReserved5 = FALSE;
	pAnalog->m_bReserved6 = FALSE;
	pAnalog->m_bReserved7 = FALSE;
	pAnalog->m_bReserved8 = FALSE;
	pAnalog->m_bReserved9 = FALSE;
	pAnalog->m_bReserved10 = FALSE;



	pAnalog->m_pDevice = NULL;

	pAnalog->m_fData = 0.0;

	pVariantsManager->m_analog.Add(pAnalog);
}

void CAnalogSinglePropertyDlg::EditVariant(int nVarID)
{
	CString str;
	CAnalog *pAnalog = pVariantsManager->FindAnalog(nVarID);

	if( pAnalog==NULL )
		return;

	// 变量UID
	pAnalog->m_strVarUID = m_DDXFields.GetAt(1).m_value;

	// 变量名称
	pAnalog->m_strName = m_DDXFields.GetAt(2).m_value;

	// 变量描述
	pAnalog->m_strDesc = m_DDXFields.GetAt(3).m_value;

	// 变量类型ID
	str = m_DDXFields.GetAt(4).m_value;
	pAnalog->m_nVarTypeID = atoi(str);

	// 变量数据长度
	str = m_DDXFields.GetAt(5).m_value;
	pAnalog->m_nDataLen = atoi(str);

	// 开的描述
	pAnalog->m_strOnDesc = m_DDXFields.GetAt(6).m_value;

	// 关的描述
	pAnalog->m_strOffDesc = m_DDXFields.GetAt(7).m_value;

	// 最大值
	pAnalog->m_nMaxValues = atoi(m_DDXFields.GetAt(8).m_value);

	// 最小值
	pAnalog->m_nMinValues = atoi(m_DDXFields.GetAt(9).m_value);

	// 最大转换比率
	pAnalog->m_nMaxConvtRate = atoi(m_DDXFields.GetAt(10).m_value);

	// 最小转换比率
	pAnalog->m_nMinConvtRate = atoi(m_DDXFields.GetAt(11).m_value);
	
	// 下限
	pAnalog->m_nLowerLimit = atoi(m_DDXFields.GetAt(12).m_value);

	// 上限
	pAnalog->m_nUpperLimit = atoi(m_DDXFields.GetAt(13).m_value);

	// 正常状态
	pAnalog->m_nNormalState = atoi(m_DDXFields.GetAt(14).m_value);

	// 设定值
	pAnalog->m_strSetValue = m_DDXFields.GetAt(15).m_value;

	// 校正值
	pAnalog->m_nRearm = atoi(m_DDXFields.GetAt(16).m_value);

	// 偏移量
	pAnalog->m_nOffset = atoi(m_DDXFields.GetAt(17).m_value);

	// 单位
	pAnalog->m_strUnit = m_DDXFields.GetAt(18).m_value;

	// 采集频率
	pAnalog->m_nCollectFreq = atoi(m_DDXFields.GetAt(19).m_value);

	// 转换系数
	pAnalog->m_fCoef = (float)atof(m_DDXFields.GetAt(20).m_value);

	// 告警级别
	pAnalog->m_nWaringLevel = atoi(m_DDXFields.GetAt(21).m_value);

	// 读写权限
	pAnalog->m_nPurview = atoi(m_DDXFields.GetAt(22).m_value);

	// 是否保存数值
	pAnalog->m_bIsSave = atoi(m_DDXFields.GetAt(23).m_value);

	// 是否实时采集数据
	pAnalog->m_bRealtimeFlag = atoi(m_DDXFields.GetAt(24).m_value);

	// 是否记录实时曲线
	pAnalog->m_bRecCurve = atoi(m_DDXFields.GetAt(25).m_value);

	// 是否允许DDE访问
	pAnalog->m_bIsDDE = atoi(m_DDXFields.GetAt(26).m_value);

	// 请求寄存器个数
	pAnalog->m_nRegNum = atoi(m_DDXFields.GetAt(27).m_value);

	// 功能码id
	pAnalog->m_nFuncCode = atoi(m_DDXFields.GetAt(28).m_value);

	// 寄存器子id
	pAnalog->m_nVarChildID = atoi(m_DDXFields.GetAt(29).m_value);

	// 位信息id
	pAnalog->m_nVarItemID = atoi(m_DDXFields.GetAt(30).m_value);

	// SNMP对象oid
	pAnalog->m_strSnmpOid = m_DDXFields.GetAt(31).m_value;
	
	// SNMP域
	pAnalog->m_strFields = m_DDXFields.GetAt(32).m_value;

	// 设备类型ID
	pAnalog->m_nDevID = atoi(m_DDXFields.GetAt(33).m_value);

	// 起始地址
	pAnalog->m_nRegStartAddr = atoi(m_DDXFields.GetAt(34).m_value);

	// Rs232请求命令
	pAnalog->m_strRs232Cmd = m_DDXFields.GetAt(35).m_value;

	// Rs232请求类型
	pAnalog->m_strRs232Type = m_DDXFields.GetAt(36).m_value;

	// Rs232数据索引
	pAnalog->m_nRs232Index = atoi(m_DDXFields.GetAt(37).m_value);

	// 辨別時間
	pAnalog->m_nIdentifyTime = atoi(m_DDXFields.GetAt(38).m_value);

	// 重新檢測時間
	pAnalog->m_nRedetectTime = atoi(m_DDXFields.GetAt(39).m_value);


	// 起始BIT位
	if( m_nStartBit >= 0 && m_nStartBit <= 64 )
	{
		pAnalog->m_nStartBit = m_nStartBit;
	}

	// 终止BIT位
	if( m_nEndBit >= 0 && m_nEndBit <= 64 )
	{
		pAnalog->m_nEndBit = m_nEndBit;
	}

	pAnalog->m_strReserved1 = m_DDXFields.GetAt(42).m_value;
	pAnalog->m_strReserved2 = m_DDXFields.GetAt(48).m_value;
	pAnalog->m_strReserved3 = m_DDXFields.GetAt(49).m_value;
	pAnalog->m_strReserved4 = "";
	pAnalog->m_strReserved5 = "";
	pAnalog->m_strReserved6 = "";
	pAnalog->m_strReserved7 = "";
	pAnalog->m_strReserved8 = "";
	pAnalog->m_strReserved9 = "";
	pAnalog->m_strReserved10 = "";

	pAnalog->m_nReserved1 = atoi(m_DDXFields.GetAt(45).m_value);
	pAnalog->m_nReserved2 = atoi(m_DDXFields.GetAt(46).m_value);
	pAnalog->m_nReserved3 = atoi(m_DDXFields.GetAt(47).m_value);
	pAnalog->m_nReserved4 = 0;
	pAnalog->m_nReserved5 = 0;
	pAnalog->m_nReserved6 = 0;
	pAnalog->m_nReserved7 = 0;
	pAnalog->m_nReserved8 = 0;
	pAnalog->m_nReserved9 = 0;
	pAnalog->m_nReserved10 = 0;

	if( atoi(m_DDXFields.GetAt(41).m_value) == 1 )
	{
		pAnalog->m_bReserved1 = true;
	}
	else if( atoi(m_DDXFields.GetAt(41).m_value) == 0 )
	{
		pAnalog->m_bReserved1 = false;
	}

	if( atoi(m_DDXFields.GetAt(43).m_value) == 1 )
	{
		pAnalog->m_bReserved2 = true;
	}
	else if( atoi(m_DDXFields.GetAt(43).m_value) == 0 )
	{
		pAnalog->m_bReserved2 = false;
	}

	//pAnalog->m_bReserved1 = FALSE;
	//pAnalog->m_bReserved2 = FALSE;
	pAnalog->m_bReserved3 = FALSE;
	pAnalog->m_bReserved4 = FALSE;
	pAnalog->m_bReserved5 = FALSE;
	pAnalog->m_bReserved6 = FALSE;
	pAnalog->m_bReserved7 = FALSE;
	pAnalog->m_bReserved8 = FALSE;
	pAnalog->m_bReserved9 = FALSE;
	pAnalog->m_bReserved10 = FALSE;

	pAnalog->m_pDevice = NULL;
	int i, nChannelSize = pDevicesManager->m_channels.GetSize();
	int j, nDevicesSize;
	for( i = 0; i < nChannelSize; i++ )
	{
		nDevicesSize = pDevicesManager->m_channels[i]->m_Devices.GetSize();
		for( j = 0; j < nDevicesSize; j++ )
		{
			if( !pDevicesManager->m_channels[i]->m_Devices[j]->m_strUID.Compare(pAnalog->m_strVarUID) )
			{
				pAnalog->m_pDevice = pDevicesManager->m_channels[i]->m_Devices[j];
			}
		}
	}
}

void CAnalogSinglePropertyDlg::OnBnClickedBtnCancel()
{
	// TODO: 在此添加控件通知处理程序代码
	OnCancel();
}

int CAnalogSinglePropertyDlg::CheckDataValid()
{
	CHAR szVarID[MAX_ID + 1] = {0};
	CExString strVarName;
	strVarName = m_DDXFields.GetAt(2).m_value;

	CString strUID = m_DDXFields.GetAt(1).m_value;
	if( !strUID.Compare("") ) return 1;
	int nRet = CDBInterface::GetInstancePtr()->GetVarID( (char *)(LPCTSTR)strVarName, szVarID );
	m_sVarName = strVarName;
	m_sUid = strUID;
	if( nRet > 0 )
	{
		return 2;
	}
	
	return nRet;
}
void CAnalogSinglePropertyDlg::GetVarForEditMore()
{
	//UpdateData();

	CString str;

	GetDlgItemText( IDC_EDT_PARAM_INIT,str );//变量初始值
	m_sVarSave[m_nVarSaveNum++] = str;
	GetDlgItemText( IDC_EDT_PARAM_MIN,str );//变量最小值
	m_sVarSave[m_nVarSaveNum++] = str;
	GetDlgItemText( IDC_EDT_PARAM_MAX,str );//变量最大值
	m_sVarSave[m_nVarSaveNum++] = str;

	GetDlgItemText( IDC_EDT_MAX_VALUES,str );//最大值
	m_sVarSave[m_nVarSaveNum++] = str;
	GetDlgItemText( IDC_EDT_MIN_VALUES,str );//最小值
	m_sVarSave[m_nVarSaveNum++] = str;
	GetDlgItemText( IDC_EDT_MAX_SCALE,str );//最大比例
	m_sVarSave[m_nVarSaveNum++] = str;
	GetDlgItemText( IDC_EDT_MIN_SCALE,str );//最小比例
	m_sVarSave[m_nVarSaveNum++] = str;

	GetDlgItemText( IDC_EDT_LOWER_LIMIT,str );//下限
	m_sVarSave[m_nVarSaveNum++] = str;
	GetDlgItemText( IDC_EDT_UPPER_LIMIT,str );//上限
	m_sVarSave[m_nVarSaveNum++] = str;
	GetDlgItemText( IDC_EDT_NORMAL_STATE,str );//正常状态
	m_sVarSave[m_nVarSaveNum++] = str;
	GetDlgItemText( IDC_EDT_SET_VALUE,str );//设定值
	m_sVarSave[m_nVarSaveNum++] = str;

	GetDlgItemText( IDC_EDT_REARM,str );//校正值
	m_sVarSave[m_nVarSaveNum++] = str;
	GetDlgItemText( IDC_EDT_OFF_SET,str );//偏移量
	m_sVarSave[m_nVarSaveNum++] = str;
	GetDlgItemText( IDC_EDT_UNIT,str );//单位
	m_sVarSave[m_nVarSaveNum++] = str;
	GetDlgItemText( IDC_EDT_COLLECT_FREQ,str );//采集频率
	m_sVarSave[m_nVarSaveNum++] = str;
	
	GetDlgItemText( IDC_EDT_COEF,str );//转换系数
	m_sVarSave[m_nVarSaveNum++] = str;
	GetDlgItemText( IDC_EDT_ALARM_LEVEL,str );//报警级别
	m_sVarSave[m_nVarSaveNum++] = str;
	GetDlgItemText( IDC_EDT_SAVE_DATA,str );//保存数值
	m_sVarSave[m_nVarSaveNum++] = str;
	GetDlgItemText( IDC_EDT_COLLECT_THRAD_DATA,str );//是否实时采集数据
	m_sVarSave[m_nVarSaveNum++] = str;
	GetDlgItemText( IDC_EDT_IS_MODIFY,str );//需要用户修改
	m_sVarSave[m_nVarSaveNum++] = str;

	GetDlgItemText( IDC_EDT_SHOW_CURR_VALUE,str );//报警内容是否显示当前值
	m_sVarSave[m_nVarSaveNum++] = str;
	GetDlgItemText( IDC_EDT_IS_NOTICE,str );//是否触发远程报警
	m_sVarSave[m_nVarSaveNum++] = str;

	GetDlgItemText( IDC_EDT_IDENTIFY_TIME,str );//辨识时间
	m_sVarSave[m_nVarSaveNum++] = str;
	GetDlgItemText( IDC_EDT_REDETECT_TIME,str );//重新检测时间
	m_sVarSave[m_nVarSaveNum++] = str;
	GetDlgItemText( IDC_EDT_NORMAL_IS_NOTICE,str );//状态恢复正常是否触发远程报警
	m_sVarSave[m_nVarSaveNum++] = str;
}
void CAnalogSinglePropertyDlg::GetVarForEditMoreOld()
{
	UpdateData();

	CString str;

	GetDlgItemText( IDC_EDT_PARAM_INIT,str );//变量初始值
	m_sVarSaveOld[m_nVarSaveNumOld++] = str;
	GetDlgItemText( IDC_EDT_PARAM_MIN,str );//变量最小值
	m_sVarSaveOld[m_nVarSaveNumOld++] = str;
	GetDlgItemText( IDC_EDT_PARAM_MAX,str );//变量最大值
	m_sVarSaveOld[m_nVarSaveNumOld++] = str;

	GetDlgItemText( IDC_EDT_MAX_VALUES,str );//最大值
	m_sVarSaveOld[m_nVarSaveNumOld++] = str;
	GetDlgItemText( IDC_EDT_MIN_VALUES,str );//最小值
	m_sVarSaveOld[m_nVarSaveNumOld++] = str;
	GetDlgItemText( IDC_EDT_MAX_SCALE,str );//最大比例
	m_sVarSaveOld[m_nVarSaveNumOld++] = str;
	GetDlgItemText( IDC_EDT_MIN_SCALE,str );//最小比例
	m_sVarSaveOld[m_nVarSaveNumOld++] = str;

	GetDlgItemText( IDC_EDT_LOWER_LIMIT,str );//下限
	m_sVarSaveOld[m_nVarSaveNumOld++] = str;
	GetDlgItemText( IDC_EDT_UPPER_LIMIT,str );//上限
	m_sVarSaveOld[m_nVarSaveNumOld++] = str;
	GetDlgItemText( IDC_EDT_NORMAL_STATE,str );//正常状态
	m_sVarSaveOld[m_nVarSaveNumOld++] = str;
	GetDlgItemText( IDC_EDT_SET_VALUE,str );//设定值
	m_sVarSaveOld[m_nVarSaveNumOld++] = str;

	GetDlgItemText( IDC_EDT_REARM,str );//校正值
	m_sVarSaveOld[m_nVarSaveNumOld++] = str;
	GetDlgItemText( IDC_EDT_OFF_SET,str );//偏移量
	m_sVarSaveOld[m_nVarSaveNumOld++] = str;
	GetDlgItemText( IDC_EDT_UNIT,str );//单位
	m_sVarSaveOld[m_nVarSaveNumOld++] = str;
	GetDlgItemText( IDC_EDT_COLLECT_FREQ,str );//采集频率
	m_sVarSaveOld[m_nVarSaveNumOld++] = str;
	
	GetDlgItemText( IDC_EDT_COEF,str );//转换系数
	m_sVarSaveOld[m_nVarSaveNumOld++] = str;
	GetDlgItemText( IDC_EDT_ALARM_LEVEL,str );//报警级别
	m_sVarSaveOld[m_nVarSaveNumOld++] = str;
	GetDlgItemText( IDC_EDT_SAVE_DATA,str );//保存数值
	m_sVarSaveOld[m_nVarSaveNumOld++] = str;
	GetDlgItemText( IDC_EDT_COLLECT_THRAD_DATA,str );//是否实时采集数据
	m_sVarSaveOld[m_nVarSaveNumOld++] = str;
	GetDlgItemText( IDC_EDT_IS_MODIFY,str );//需要用户修改
	m_sVarSaveOld[m_nVarSaveNumOld++] = str;

	GetDlgItemText( IDC_EDT_SHOW_CURR_VALUE,str );//报警内容是否显示当前值
	m_sVarSaveOld[m_nVarSaveNumOld++] = str;
	GetDlgItemText( IDC_EDT_IS_NOTICE,str );//是否触发远程报警
	m_sVarSaveOld[m_nVarSaveNumOld++] = str;

	GetDlgItemText( IDC_EDT_IDENTIFY_TIME,str );//辨识时间
	m_sVarSaveOld[m_nVarSaveNumOld++] = str;
	GetDlgItemText( IDC_EDT_REDETECT_TIME,str );//重新检测时间
	m_sVarSaveOld[m_nVarSaveNumOld++] = str;
	GetDlgItemText( IDC_EDT_NORMAL_IS_NOTICE,str );//状态恢复正常是否触发远程报警
	m_sVarSaveOld[m_nVarSaveNumOld++] = str;
}
void CAnalogSinglePropertyDlg::OnBnClickedBtnSave()
{
	// TODO: 在此添加控件通知处理程序代码
	// 存盘操作

	CExString strField;
	CString strVarTypeName, strFuncCode, strAlarmLevel;
	CHAR szVarTypeID[MAX_ID + 1] = {0};
	CHAR szFuncCodeID[MAX_ID + 1] = {0};
	CHAR szMaxID[MAX_ID + 1] = {0};
	CHAR strSQLText[MAX_SQL_LENGTH + 1] = {0};

	GetDlgItem(IDC_COMBO_VAR_TYPE)->GetWindowText(strVarTypeName);
	CDBInterface::GetInstancePtr()->GetVarTypeID((char *)(LPCTSTR)strVarTypeName, szVarTypeID);
	GetDlgItem(IDC_EDT_VAR_TYPE_ID)->SetWindowText(szVarTypeID);

	GetDlgItem(IDC_COMBO_CODE_FUNC)->GetWindowText(strFuncCode);	
	CDBInterface::GetInstancePtr()->GetFuncCodeID((char *)(LPCTSTR)strFuncCode, szFuncCodeID );
	GetDlgItem(IDC_EDT_FUNC_ID)->SetWindowText(szFuncCodeID);

	GetDlgItem(IDC_COMBO_ALARM_LEVEL)->GetWindowText(strAlarmLevel);
	GetDlgItem(IDC_EDT_ALARM_LEVEL)->SetWindowText(strAlarmLevel);

	CString strCmd, strCmdType, strCmdIndex;
	int nCmdIndex = ((CComboBox *)GetDlgItem(IDC_COMBO_RS232_CMD))->GetCurSel();
	if( nCmdIndex != -1 )
	{
		strCmd.Format("cmd-%d", nCmdIndex + 1);
		GetDlgItem(IDC_EDT_RS232_CMD)->SetWindowText(strCmd);
	}

	int nCmdTypeIndex = ((CComboBox *)GetDlgItem(IDC_COMBO_RS232_TYPE))->GetCurSel();
	if( nCmdTypeIndex != -1 )
	{
		strCmdType.Format("type-%d", nCmdTypeIndex + 1);
		GetDlgItem(IDC_EDT_RS232_TYPE)->SetWindowText(strCmdType);
	}

	GetDlgItem(IDC_COMBO_RS232_INDEX)->GetWindowText(strCmdIndex);
	GetDlgItem(IDC_EDT_RS232_INDEX)->SetWindowText(strCmdIndex);

	CString strVarName,sInitValue,sMinValue,sMaxValue,sLowerValue,sUpperValue,sNormalValue,sWarningLevel,sIdentifyTime;
	GetDlgItem(IDC_EDT_VAR_NAME)->GetWindowText(strVarName);
	GetDlgItem(IDC_EDT_PARAM_INIT)->GetWindowText(sInitValue);
	GetDlgItem(IDC_EDT_PARAM_MIN)->GetWindowText(sMinValue);
	GetDlgItem(IDC_EDT_PARAM_MAX)->GetWindowText(sMaxValue);
	GetDlgItem(IDC_EDT_LOWER_LIMIT)->GetWindowText(sLowerValue);
	GetDlgItem(IDC_EDT_UPPER_LIMIT)->GetWindowText(sUpperValue);
	GetDlgItem(IDC_EDT_NORMAL_STATE)->GetWindowText(sNormalValue);
	GetDlgItem(IDC_EDT_ALARM_LEVEL)->GetWindowText( sWarningLevel );
	GetDlgItem(IDC_EDT_IDENTIFY_TIME)->GetWindowText( sIdentifyTime );
	//if( strVarName.Compare("")==0 )
	//{
	//	MessageBox(g_strVarNameIsBlank, g_strTip, MB_ICONWARNING);
	//	return;
	//}CString CAnalogPropertyDlg::GetInvalidMessage( CString sVarName,int iInitValue,int iMinValue,int iMaxValue,int iLowerValue,int iUpperValue,int iNormalValue )

	CString sMsg = GetInvalidMessage( strVarName,atoi(sInitValue),atoi(sMinValue),atoi(sMaxValue),atoi(sLowerValue),atoi(sUpperValue),atoi(sNormalValue),atoi(sWarningLevel),atoi(sIdentifyTime) );
	if( sMsg !="" )
	{
		CDlg_ShowMessage dlg;
		dlg.m_sEdit_Show = sMsg;
		dlg.DoModal();
		return;
	}

	//先把下拉框，多选按钮，单选按钮的值赋给文本
	ChangeCtrlInfo();
	
	//編輯多個
	int nListCount = m_nArrayListID.GetCount();
	if( nListCount>1 )
	{
		//保存可以多个变量的值
		GetVarForEditMore();
		EditMoreVar();
		return;
	}

	CDBInterface::GetInstancePtr()->GetMaxID("t_dev_variant", "id", szMaxID);

	int nID;
	CString strVarID;

	try
	{
		switch (m_operation)
		{
			case EDIT:
				GetDlgItem(IDC_EDT_VAR_ID)->GetWindowText(strVarID);
				m_nVarID = atoi(strVarID);
			break;
			default:
				if( atoi(szMaxID) > 0 )
				{
					nID = atoi(szMaxID) + 1;
					m_nVarID = nID;
				}
				else if( atoi(szMaxID) == 0 )
				{
					nID = 1;
					m_nVarID = nID;
				}
				strVarID.Format("%d", nID);
				GetDlgItem(IDC_EDT_VAR_ID)->SetWindowText(strVarID);
		
				//m_pSet->AddNew();
			break;
		}

		UpdateData(TRUE);
		try
		{
			// 校验数据的正确性
			int nRet = CheckDataValid();
			if( nRet == 1 && ( m_operation == NEW || m_operation == COPY ) )
			{
				MessageBox(g_strVarUidIsBlank, g_strTip, MB_ICONWARNING);
				//CDialog::OnOK();
				return;
			}
			else if( nRet == 2 && ( m_operation == NEW || m_operation == COPY ) )
			{
				MessageBox(g_strVarNameExist, g_strTip, MB_ICONWARNING);
				//CDialog::OnOK();
				return;
			}
			if (!_stricmp(g_strDBType, "SQL SERVER"))
			{
				sprintf(strSQLText, "insert into t_dev_variant(id, uid, varname, description, vartypeid, " \
					"datalen, ondesc, offdesc, maxvalues, minvalues, maxconvtrate, minconvtrate, " \
					"lowerlimit, upperlimit, normalstate, setvalue, rearm, [offsets], unit, collectfrequence, " \
					"coefficient, warnlevel, readonly, issave, realtimeflag, reccurve, isdde, " \
					"registernum, funcid, childid, var_item_id, snmpoid, fields, devtypeid, address, " \
					"rs232cmd, rs232type, rs232index, identifytime, redetecttime, normalisnotice, boolreserved1,  " \
					"strreserved1, boolreserved2,boolreserved3,intreserved1,intreserved2,intreserved3,strreserved2,strreserved3) values(");
			}
			else if(!_stricmp(g_strDBType, "PGSQL"))
			{
				sprintf(strSQLText, "insert into t_dev_variant(id, uid, varname, description, vartypeid, " \
					"datalen, ondesc, offdesc, maxvalues, minvalues, maxconvtrate, minconvtrate, " \
					"lowerlimit, upperlimit, normalstate, setvalue, rearm, offsets, unit, collectfrequence, " \
					"coefficient, warnlevel, readonly, issave, realtimeflag, reccurve, isdde, " \
					"registernum, funcid, childid, var_item_id, snmpoid, fields, devtypeid, address, " \
					"rs232cmd, rs232type, rs232index, identifytime, redetecttime, normalisnotice, boolreserved1,  " \
					"strreserved1, boolreserved2,boolreserved3,intreserved1,intreserved2,intreserved3,strreserved2,strreserved3) values(");
			}

			if( m_DDXFields.WriteData("t_dev_variant", strSQLText, m_operation) != -1 )
			{
				// 添加到变量管理类里面
				if( m_operation == NEW || m_operation == COPY )
				{
					InsertToVariantManager();
				}
				else if( m_operation == EDIT )
				{
					EditVariant(atoi(m_DDXFields.GetAt(0).m_value));
				}
			}
		}
		catch(...)
		{
			;
		}
		UpdateData(FALSE);

		g_nRunEditVarTick = GetTickCount();//在运行状态编辑变量的TICK
		g_bRunEditVar = true;//是否在运行状态编辑变量

		CDialog::OnOK();


	}//try
	catch( _com_error &e )
	{

		CString mes1,mes2,mes3,mes4;

		mes1.Format(_T("Error:%08lx.\n"), e.Error());
		mes2.Format(_T("ErrorMessage:%s.\n"), e.ErrorMessage());
		mes3.Format(_T("Source:%s.\n"), (LPCTSTR) _bstr_t(e.Source()));
		mes4.Format(_T("Description:%s.\n"), (LPCTSTR) _bstr_t(e.Description()));
		MessageBox(mes1+mes2+mes3+mes4,_T("Invalid field "),MB_ICONERROR);

		return;
	}
	catch(...)
	{
		MessageBox(_T("Unhandled Exception"),_T("Invalid field ")+strField,MB_ICONERROR);
		return;
	}	
}
void CAnalogSinglePropertyDlg::EditMoreVar()
{
	bool bExit=false;
	int nNowRow = 0;
	int nListCount = m_nArrayListID.GetCount();
	for( int i=0;i<nListCount;i++ )
	{
		nNowRow = m_nArrayListID[i];

		if( nNowRow<m_nPrevRow )
		{
			for( int m=0;m<m_nPrevRow-nNowRow;m++ )
				m_pSet->MovePrevious();

			m_nPrevRow = nNowRow;
		}
		else
		{
			for( int m=0;m<nNowRow-m_nPrevRow;m++ )
				m_pSet->MoveNext();

			m_nPrevRow = nNowRow;
		}

		m_DDXFields.ReadData(m_pSet);
		UpdateData(FALSE);

		//先把下拉框，多选按钮，单选按钮的值赋给文本
		InitCtrlInfoForEditMore();

		CExString strField;
		CHAR strSQLText[MAX_SQL_LENGTH + 1] = {0};

		ChangeCtrlInfoForEditMore();

		CString strVarID;

		try
		{
			GetDlgItem(IDC_EDT_VAR_ID)->GetWindowText(strVarID);
			m_nVarID = atoi(strVarID);

			UpdateData(true);

			try
			{
				// 校验数据的正确性
				int nRet = CheckDataValid();
				if( nRet == 1 && m_operation == NEW )
				{
					return;
				}
				else if( nRet == 2 && m_operation == NEW )
				{
					return;
				}

				if (!_stricmp(g_strDBType, "SQL SERVER"))
				{
					sprintf(strSQLText, "insert into t_dev_variant(id, boolreserved3, uid, varname, description, vartypeid, " \
						"datalen, ondesc, offdesc, maxvalues, minvalues, maxconvtrate, minconvtrate, " \
						"lowerlimit, upperlimit, normalstate, setvalue, rearm, [offsets], unit, collectfrequence, " \
						"coefficient, warnlevel, readonly, issave, realtimeflag, reccurve, isdde, " \
						"registernum, funcid, childid, var_item_id, snmpoid, fields, devtypeid, address, " \
						"rs232cmd, rs232type, rs232index, identifytime, redetecttime, normalisnotice, boolreserved1,  " \
					"strreserved1, boolreserved2,boolreserved3,intreserved1,intreserved2,intreserved3,strreserved2,strreserved3) values(");
				}
				else if(!_stricmp(g_strDBType, "PGSQL"))
				{
					sprintf(strSQLText, "insert into t_dev_variant(id, boolreserved3, uid, varname, description, vartypeid, " \
						"datalen, ondesc, offdesc, maxvalues, minvalues, maxconvtrate, minconvtrate, " \
						"lowerlimit, upperlimit, normalstate, setvalue, rearm, offsets, unit, collectfrequence, " \
						"coefficient, warnlevel, readonly, issave, realtimeflag, reccurve, isdde, " \
						"registernum, funcid, childid, var_item_id, snmpoid, fields, devtypeid, address, " \
						"rs232cmd, rs232type, rs232index, identifytime, redetecttime, normalisnotice, boolreserved1,  " \
					"strreserved1, boolreserved2,boolreserved3,intreserved1,intreserved2,intreserved3,strreserved2,strreserved3) values(");
				}
				//sprintf(strSQLText, "insert into t_dev_variant(id, boolreserved3, uid, varname, description, vartypeid, " \
				//	"datalen, ondesc, offdesc, maxvalues, minvalues, maxconvtrate, minconvtrate, " \
				//	"lowerlimit, upperlimit, normalstate, setvalue, rearm, [offsets], unit, collectfrequence, " \
				//	"coefficient, warnlevel, readonly, issave, realtimeflag, reccurve, isdde, " \
				//	"registernum, funcid, childid, var_item_id, snmpoid, fields, devtypeid, address, " \
				//	"rs232cmd, rs232type, rs232index, identifytime, redetecttime, normalisnotice, boolreserved1, strreserved1, boolreserved2,intreserved1,intreserved2,intreserved3) values(");

				if( m_DDXFields.WriteData("t_dev_variant", strSQLText, m_operation) != -1 )
				{
					// 添加到变量管理类里面
					if( m_operation == NEW || m_operation == COPY )
					{
						InsertToVariantManager();
					}
					else if( m_operation == EDIT || m_operation==EDITMORE )
					{
						EditVariant(atoi(m_DDXFields.GetAt(0).m_value));
					}
				}
			}
			catch(...)
			{
				;
			}
			UpdateData(FALSE);

			CString sContent;
			sContent.Format("%s %s< %s >",g_strEdit,g_strVariant,m_sVarName.TrimRight() );
			CDBInterface::GetInstancePtr()->InsertLogRecord( LOG_PARAM_EDIT,0,"",(char *)(LPCTSTR)sContent );

			pDevicesManager->SendNoticeToServer( CMD_NOTICE_READ_DB_VAR,CMD_OPERATE_EDIT,"",m_sUid,m_nVarID,"64320" );
			if( !bExit )
				CDialog::OnOK();
			bExit = true;
		}//try
		catch( _com_error &e )
		{

			CString mes1,mes2,mes3,mes4;

			mes1.Format(_T("Error:%08lx.\n"), e.Error());
			mes2.Format(_T("ErrorMessage:%s.\n"), e.ErrorMessage());
			mes3.Format(_T("Source:%s.\n"), (LPCTSTR) _bstr_t(e.Source()));
			mes4.Format(_T("Description:%s.\n"), (LPCTSTR) _bstr_t(e.Description()));
			MessageBox(mes1+mes2+mes3+mes4,_T("Invalid field "),MB_ICONERROR);

			return;
		}
		catch(...)
		{
			MessageBox(_T("Unhandled Exception"),_T("Invalid field ")+strField,MB_ICONERROR);
			return;
		}	
	}
}
void CAnalogSinglePropertyDlg::OnBnClickedBtnSelDev()
{
	// TODO: 在此添加控件通知处理程序代码
	// 选择设备
	CString strUID, strVarName;
	CDlgSelectDev dlg;
	CHAR szDevUID[MAX_DESC + 1] = {0};
	if( dlg.DoModal() == IDOK )
	{
		CDBInterface::GetInstancePtr()->GetDevUID( (char *)(LPCTSTR)dlg.m_strDevName, szDevUID );
		strUID = szDevUID;
		GetDlgItem(IDC_EDT_VAR_UID)->SetWindowText(strUID);
		strVarName.Format(g_strVarName2, dlg.m_strDevName);
		GetDlgItem(IDC_EDT_VAR_NAME)->SetWindowText(strVarName);

		CHAR szDevDriverID[MAX_ID + 1] = {0};
		CHAR szDevFactoryID[MAX_ID + 1] = {0};
		CHAR szDevTypeID[MAX_ID + 1] = {0};
		SplitStr((char*)(LPCTSTR)strUID, '.', 0, szDevDriverID);
		SplitStr((char*)(LPCTSTR)strUID, '.', 1, szDevFactoryID);
		SplitStr((char*)(LPCTSTR)strUID, '.', 2, szDevTypeID);
		GetDlgItem(IDC_EDT_DEV_TYPE_ID)->SetWindowText(szDevTypeID);

		InitRs232Combo();
	}
}

void CAnalogSinglePropertyDlg::OnBnClickedBtnSelReg()
{
	// TODO: 在此添加控件通知处理程序代码
	// 选择寄存器
}

void CAnalogSinglePropertyDlg::OnBnClickedBtnSelBit()
{
	// TODO: 在此添加控件通知处理程序代码
	// 选择bit位信息

	CDlgBitManager dlg;
	CString str;
	// 变量UID
	GetDlgItem(IDC_EDT_VAR_UID)->GetWindowText(str);
	
	if( !str.Compare("") )
	{
		MessageBox(g_strSelDev, g_strTip, MB_ICONWARNING);
		return;
	}
	dlg.m_strUID = str;
	if( dlg.DoModal() == IDOK )
	{
		str.Format("%d", dlg.m_nID);
		GetDlgItem(IDC_EDT_VAR_ITEM_ID)->SetWindowText(str);
		m_nStartBit = dlg.m_nStartBit;
		m_nEndBit = dlg.m_nEndBit;
	}
}

void CAnalogSinglePropertyDlg::OnCbnSelendokComboVarType()
{
	// TODO: 在此添加控件通知处理程序代码
	
}
void CAnalogSinglePropertyDlg::OnBnClickedBtnSelAlarmVar()
{
	// TODO: 在此添加控件通知处理程序代码
	CSelectVariantDlg dlg;
	if ( dlg.DoModal() == IDOK )
	{
		GetDlgItem(IDC_EDT_ALARM_VAR_NAME)->SetWindowText(dlg.m_strVar);
	}	
}

void CAnalogSinglePropertyDlg::JudgePermit()
{
	if( -1==PMS_VerifyUserPermit( g_nUserID,PMS_P_PARAM_DESC,"" ) )//"P更改变量描述"
	{
		GetDlgItem(IDC_EDT_DESC)->EnableWindow( false );
	}
	if( -1==PMS_VerifyUserPermit( g_nUserID,PMS_P_OPEN_DESC,"" ) )//"P更改开的描述"
	{
		GetDlgItem(IDC_EDT_ON_DESC)->EnableWindow( false );
	}
	if( -1==PMS_VerifyUserPermit( g_nUserID,PMS_P_CLOSE_DESC,"" ) )//"P更改关的描述"
	{
		GetDlgItem(IDC_EDT_OFF_DESC)->EnableWindow( false );
	}
	if( -1==PMS_VerifyUserPermit( g_nUserID,PMS_P_LOWER_LIMIT,"" ) )//"P更改下限"
	{
		GetDlgItem(IDC_EDT_LOWER_LIMIT)->EnableWindow( false );
	}
	if( -1==PMS_VerifyUserPermit( g_nUserID,PMS_P_UPPER_BOUND,"" ) )//"P更改上限"
	{
		GetDlgItem(IDC_EDT_UPPER_LIMIT)->EnableWindow( false );
	}
	if( -1==PMS_VerifyUserPermit( g_nUserID,PMS_P_NORMAL_STATUSDATA,"" ) )//"P更改正常状态值"
	{
		GetDlgItem(IDC_EDT_NORMAL_STATE)->EnableWindow( false );
	}
	if( -1==PMS_VerifyUserPermit( g_nUserID,PMS_P_SET_STATUSDATA,"" ) )//"P设置状态值"
	{
		GetDlgItem(IDC_EDT_SET_VALUE)->EnableWindow( false );
	}
	if( -1==PMS_VerifyUserPermit( g_nUserID,PMS_P_ADJUST,"" ) )//"P更改校正值"
	{
		GetDlgItem(IDC_EDT_REARM)->EnableWindow( false );
	}
	if( -1==PMS_VerifyUserPermit( g_nUserID,PMS_P_OFFSET,"" ) )//"P更改偏移量"
	{
		GetDlgItem(IDC_EDT_OFF_SET)->EnableWindow( false );
	}
	if( -1==PMS_VerifyUserPermit( g_nUserID,PMS_P_UNIT,"" ) )//"P更改单位"
	{
		GetDlgItem(IDC_EDT_UNIT)->EnableWindow( false );
	}
	if( -1==PMS_VerifyUserPermit( g_nUserID,PMS_P_GATHER_RATE,"" ) )//"P更改采集频率"
	{
		GetDlgItem(IDC_EDT_COLLECT_FREQ)->EnableWindow( false );
	}
	if( -1==PMS_VerifyUserPermit( g_nUserID,PMS_P_SHIFT_RADIO,"" ) )//"P更改转换系数"
	{
		GetDlgItem(IDC_EDT_COEF)->EnableWindow( false );
	}
	if( -1==PMS_VerifyUserPermit( g_nUserID,PMS_P_ALARM_LEVEL,"" ) )//"P更改报警级别"
	{
		GetDlgItem(IDC_COMBO_ALARM_LEVEL)->EnableWindow( false );
	}
	if( -1==PMS_VerifyUserPermit( g_nUserID,PMS_P_RW_PMS,"" ) )//"P更改读写权限"
	{
		GetDlgItem(IDC_RADIO_READ_ONLY)->EnableWindow( false );
		GetDlgItem(IDC_RADIO_WRITE)->EnableWindow( false );
		GetDlgItem(IDC_RADIO_READ_WRITE)->EnableWindow( false );
	}
	if( -1==PMS_VerifyUserPermit( g_nUserID,PMS_P_SAVE_DATA_STATUS,"" ) )//"P更改保存数值状态"
	{
		GetDlgItem(IDC_CHK_SAVE_DATA)->EnableWindow( false );
	}
	if( -1==PMS_VerifyUserPermit( g_nUserID,PMS_P_REALTIME_GATHER_DATA_STATUS,"" ) )//"P更改实时采集数据状态"
	{
		GetDlgItem(IDC_CHK_THREAD_COLLECT_DATA)->EnableWindow( false );
	}
	if( -1==PMS_VerifyUserPermit( g_nUserID,PMS_P_ALARM_CONTENT_CURRENT_DATA,"" ) )//"P更改报警内容是否显示当前值状态"
	{
		GetDlgItem(IDC_CHK_SHOW_CURR_VALUE)->EnableWindow( false );
	}
	if( -1==PMS_VerifyUserPermit( g_nUserID,PMS_P_TOUCHOFF_ROMOTE_ALARM,"" ) )//"P更改是否触发远程报警"
	{
		GetDlgItem(IDC_CHK_IS_NOTICE)->EnableWindow( false );
	}
	if( -1==PMS_VerifyUserPermit( g_nUserID,PMS_P_IDENTIFICATION_TIME,"" ) )//"P更改辨识时间"
	{
		GetDlgItem(IDC_EDT_IDENTIFY_TIME)->EnableWindow( false );
	}
	if( -1==PMS_VerifyUserPermit( g_nUserID,PMS_P_AGAIN_DETECT_TIME,"" ) )//"P更改重新检测时间"
	{
		GetDlgItem(IDC_EDT_REDETECT_TIME)->EnableWindow( false );
	}
	if( -1==PMS_VerifyUserPermit( g_nUserID,PMS_P_RENEW_NORMAL_TOUCHOFF_ROMOTE_ALARM,"" ) )//"P更改状态恢复正常是否触发远程报警状态"
	{
		GetDlgItem(IDC_CHK_NORMAL_IS_NOTICE)->EnableWindow( false );
	}
	if( -1==PMS_VerifyUserPermit( g_nUserID,PMS_P_SAVE,"" ) )//"P可以存盘"
	{
		GetDlgItem(IDC_BTN_SAVE)->EnableWindow( false );
	}
	if( -1==PMS_VerifyUserPermit( g_nUserID,PMS_P_CHOOSEPARAM,"" ) )//"P可以选择变量"
	{
		GetDlgItem(IDC_BTN_SEL_ALARM_VAR1)->EnableWindow( false );
	}
	if( -1==PMS_VerifyUserPermit( g_nUserID,PMS_P_VARINI,"" ) )//"P变量初始值"
	{
		GetDlgItem(IDC_EDT_PARAM_INIT)->EnableWindow( false );
	}
	if( -1==PMS_VerifyUserPermit( g_nUserID,PMS_P_VARMIN,"" ) )//"P变量最小值"
	{
		GetDlgItem(IDC_EDT_PARAM_MIN)->EnableWindow( false );
	}
	if( -1==PMS_VerifyUserPermit( g_nUserID,PMS_P_VARMAX,"" ) )//"P变量最大值"
	{
		GetDlgItem(IDC_EDT_PARAM_MAX)->EnableWindow( false );
	}
	if( -1==PMS_VerifyUserPermit( g_nUserID,PMS_P_NEED_USER_MODIFY,"" ) )//"P需要用户修改"
	{
		GetDlgItem(IDC_CHK_IS_MODIFY)->EnableWindow( false );
	}
}
void CAnalogSinglePropertyDlg::InitCtrlInfoForEditMore()
{
	//GetDlgItem(IDC_EDT_COLLECT_FREQ)->SetWindowText("300");
	((CComboBox *)GetDlgItem(IDC_COMBO_ALARM_LEVEL))->SetCurSel(3);

	//((CButton*)GetDlgItem(IDC_RADIO_READ_ONLY))->SetCheck(TRUE);

	((CComboBox *)GetDlgItem(IDC_COMBO_CODE_FUNC))->SetCurSel(0);

	CHAR strSQLText[MAX_SQL_LENGTH + 1] = "";
	// 初始化变量类型下拉列表
	try
	{
		sprintf(strSQLText, "SELECT id, vartype FROM t_var_type");
		m_varTypeArray.Fill(strSQLText, _T("vartype"),_T("id"));

		m_cmbVarType.Attach(&m_varTypeArray, "");
		m_cmbVarType.Fill();
		m_cmbVarType.SetCurSel(0);
	}
	catch(_com_error *e)
	{
		CString Error = e->ErrorMessage();
		AfxMessageBox(e->ErrorMessage());
	}
	catch(...)
	{

	}

	// 初始化功能码下拉列表
	try
	{
		sprintf(strSQLText, "SELECT id, funcname FROM t_dev_func_code");
		m_funcCodeArray.Fill(strSQLText, _T("funcname"),_T("id"));

		m_cmbFuncCode.Attach(&m_funcCodeArray, "");
		m_cmbFuncCode.Fill();
		m_cmbFuncCode.SetCurSel(0);
	}
	catch(_com_error *e)
	{
		CString Error = e->ErrorMessage();
		AfxMessageBox(e->ErrorMessage());
	}

	CString str;
	GetDlgItem(IDC_EDT_READ_WRITE)->GetWindowText(str);
	if( !str.Compare("0") )
	{
		((CButton *)GetDlgItem(IDC_RADIO_READ_ONLY))->SetCheck(TRUE);
		((CButton *)GetDlgItem(IDC_RADIO_WRITE))->SetCheck(FALSE);
		((CButton *)GetDlgItem(IDC_RADIO_READ_WRITE))->SetCheck(FALSE);
	}
	else if( !str.Compare("1") )
	{
		((CButton *)GetDlgItem(IDC_RADIO_READ_ONLY))->SetCheck(FALSE);
		((CButton *)GetDlgItem(IDC_RADIO_WRITE))->SetCheck(TRUE);
		((CButton *)GetDlgItem(IDC_RADIO_READ_WRITE))->SetCheck(FALSE);
	}
	else if( !str.Compare("2") )
	{
		((CButton *)GetDlgItem(IDC_RADIO_READ_ONLY))->SetCheck(FALSE);
		((CButton *)GetDlgItem(IDC_RADIO_WRITE))->SetCheck(FALSE);
		((CButton *)GetDlgItem(IDC_RADIO_READ_WRITE))->SetCheck(TRUE);
	}

	GetDlgItem(IDC_EDT_SAVE_DATA)->GetWindowText(str);
	((CButton *)GetDlgItem(IDC_CHK_SAVE_DATA))->SetCheck(!str.Compare("TRUE") || !str.Compare("1") ? TRUE : FALSE );

	GetDlgItem(IDC_EDT_COLLECT_THRAD_DATA)->GetWindowText(str);
	((CButton *)GetDlgItem(IDC_CHK_THREAD_COLLECT_DATA))->SetCheck(!str.Compare("TRUE") || !str.Compare("1") ? TRUE : FALSE );

	GetDlgItem(IDC_EDT_SAVE_CURVE)->GetWindowText(str);
	((CButton *)GetDlgItem(IDC_CHK_SAVE_CURVE))->SetCheck(!str.Compare("TRUE") || !str.Compare("1") ? TRUE : FALSE );

	GetDlgItem(IDC_EDT_IS_DDE)->GetWindowText(str);
	((CButton *)GetDlgItem(IDC_CHK_IS_DDE))->SetCheck(!str.Compare("TRUE") || !str.Compare("1") ? TRUE : FALSE );
	
	GetDlgItem(IDC_EDT_NORMAL_IS_NOTICE)->GetWindowText(str);
	((CButton *)GetDlgItem(IDC_CHK_NORMAL_IS_NOTICE))->SetCheck(!str.Compare("TRUE") || !str.Compare("1") ? TRUE : FALSE );

	GetDlgItem(IDC_EDT_SHOW_CURR_VALUE)->GetWindowText(str);
	((CButton *)GetDlgItem(IDC_CHK_SHOW_CURR_VALUE))->SetCheck(!str.Compare("TRUE") || !str.Compare("1") ? TRUE : FALSE);

	GetDlgItem(IDC_EDT_IS_NOTICE)->GetWindowText(str);
	((CButton *)GetDlgItem(IDC_CHK_IS_NOTICE))->SetCheck(!str.Compare("TRUE") || !str.Compare("1") ? TRUE : FALSE);

	GetDlgItem(IDC_EDT_IS_MODIFY)->GetWindowText(str);
	((CButton *)GetDlgItem(IDC_CHK_IS_MODIFY))->SetCheck(!str.Compare("TRUE") || !str.Compare("1") ? TRUE : FALSE);

	CString strVarTypeID, strFuncID, strWarningLevel;
	CHAR szTypeName[MAX_DESC + 1] = {0};
	CHAR szFuncName[MAX_DESC + 1] = {0};

	GetDlgItem(IDC_EDT_VAR_TYPE_ID)->GetWindowText(strVarTypeID);
	GetDlgItem(IDC_EDT_FUNC_ID)->GetWindowText(strFuncID);
	GetDlgItem(IDC_EDT_ALARM_LEVEL)->GetWindowText(strWarningLevel);

	CDBInterface::GetInstancePtr()->GetVarTypeName( atoi(strVarTypeID), szTypeName );
	CDBInterface::GetInstancePtr()->GetFuncCodeName( atoi(strFuncID), szFuncName );

	GetDlgItem(IDC_COMBO_VAR_TYPE)->SetWindowText(szTypeName);
	GetDlgItem(IDC_COMBO_CODE_FUNC)->SetWindowText(szFuncName);
	GetDlgItem(IDC_COMBO_ALARM_LEVEL)->SetWindowText(strWarningLevel);

	InitRs232Combo();

	UpdateData(false);
}
void CAnalogSinglePropertyDlg::ChangeCtrlInfoForEditMore()
{
	//UpdateData();

	CString strVarTypeName, strFuncCode, strAlarmLevel;
	CHAR szVarTypeID[MAX_ID + 1] = {0};
	CHAR szFuncCodeID[MAX_ID + 1] = {0};
	CHAR szMaxID[MAX_ID + 1] = {0};
	CHAR strSQLText[MAX_SQL_LENGTH + 1] = {0};

	GetDlgItem(IDC_COMBO_VAR_TYPE)->GetWindowText(strVarTypeName);
	CDBInterface::GetInstancePtr()->GetVarTypeID((char *)(LPCTSTR)strVarTypeName, szVarTypeID);
	GetDlgItem(IDC_EDT_VAR_TYPE_ID)->SetWindowText(szVarTypeID);

	GetDlgItem(IDC_COMBO_CODE_FUNC)->GetWindowText(strFuncCode);	
	CDBInterface::GetInstancePtr()->GetFuncCodeID((char *)(LPCTSTR)strFuncCode, szFuncCodeID );
	GetDlgItem(IDC_EDT_FUNC_ID)->SetWindowText(szFuncCodeID);

	GetDlgItem(IDC_COMBO_ALARM_LEVEL)->GetWindowText(strAlarmLevel);
	GetDlgItem(IDC_EDT_ALARM_LEVEL)->SetWindowText(strAlarmLevel);

	CString strCmd, strCmdType, strCmdIndex;
	int nCmdIndex = ((CComboBox *)GetDlgItem(IDC_COMBO_RS232_CMD))->GetCurSel();
	if( nCmdIndex != -1 )
	{
		strCmd.Format("cmd-%d", nCmdIndex + 1);
		GetDlgItem(IDC_EDT_RS232_CMD)->SetWindowText(strCmd);
	}

	int nCmdTypeIndex = ((CComboBox *)GetDlgItem(IDC_COMBO_RS232_TYPE))->GetCurSel();
	if( nCmdTypeIndex != -1 )
	{
		strCmdType.Format("type-%d", nCmdTypeIndex + 1);
		GetDlgItem(IDC_EDT_RS232_TYPE)->SetWindowText(strCmdType);
	}

	GetDlgItem(IDC_COMBO_RS232_INDEX)->GetWindowText(strCmdIndex);
	GetDlgItem(IDC_EDT_RS232_INDEX)->SetWindowText(strCmdIndex);

	if( ((CButton *)GetDlgItem(IDC_RADIO_READ_ONLY))->GetCheck() )
	{
		GetDlgItem(IDC_EDT_READ_WRITE)->SetWindowText("0");
	}
	else if( ((CButton *)GetDlgItem(IDC_RADIO_WRITE))->GetCheck() )
	{
		GetDlgItem(IDC_EDT_READ_WRITE)->SetWindowText("1");
	}
	else if( ((CButton *)GetDlgItem(IDC_RADIO_READ_WRITE))->GetCheck() )
	{
		GetDlgItem(IDC_EDT_READ_WRITE)->SetWindowText("2");
	}
	else
	{
		GetDlgItem(IDC_EDT_READ_WRITE)->SetWindowText("0");
	}

	if( ((CButton *)GetDlgItem(IDC_CHK_SAVE_CURVE))->GetCheck() )
	{
		GetDlgItem(IDC_EDT_SAVE_CURVE)->SetWindowText("1");
	}
	else
	{
		GetDlgItem(IDC_EDT_SAVE_CURVE)->SetWindowText("0");
	}

	if( ((CButton *)GetDlgItem(IDC_CHK_IS_DDE))->GetCheck() )
	{
		GetDlgItem(IDC_EDT_IS_DDE)->SetWindowText("1");
	}
	else
	{
		GetDlgItem(IDC_EDT_IS_DDE)->SetWindowText("0");
	}	

	int nIndex=0;
	
	if( m_sVarSave[nIndex]!=m_sVarSaveOld[nIndex] )
		SetDlgItemText( IDC_EDT_PARAM_INIT,m_sVarSave[nIndex] );//变量初始值
	nIndex++;
	if( m_sVarSave[nIndex]!=m_sVarSaveOld[nIndex] )
		SetDlgItemText( IDC_EDT_PARAM_MIN,m_sVarSave[nIndex] );//变量最小值
	nIndex++;
	if( m_sVarSave[nIndex]!=m_sVarSaveOld[nIndex] )
		SetDlgItemText( IDC_EDT_PARAM_MAX,m_sVarSave[nIndex] );//变量最大值
	nIndex++;
	if( m_sVarSave[nIndex]!=m_sVarSaveOld[nIndex] )
		SetDlgItemText( IDC_EDT_MAX_VALUES,m_sVarSave[nIndex] );//最大值
	nIndex++;
	if( m_sVarSave[nIndex]!=m_sVarSaveOld[nIndex] )
		SetDlgItemText( IDC_EDT_MIN_VALUES,m_sVarSave[nIndex] );//最小值
	nIndex++;
	if( m_sVarSave[nIndex]!=m_sVarSaveOld[nIndex] )
		SetDlgItemText( IDC_EDT_MAX_SCALE,m_sVarSave[nIndex] );//最大比例
	nIndex++;
	if( m_sVarSave[nIndex]!=m_sVarSaveOld[nIndex] )
		SetDlgItemText( IDC_EDT_MIN_SCALE,m_sVarSave[nIndex] );//最小比例
	nIndex++;
	if( m_sVarSave[nIndex]!=m_sVarSaveOld[nIndex] )
		SetDlgItemText( IDC_EDT_LOWER_LIMIT,m_sVarSave[nIndex] );//下限
	nIndex++;
	if( m_sVarSave[nIndex]!=m_sVarSaveOld[nIndex] )
		SetDlgItemText( IDC_EDT_UPPER_LIMIT,m_sVarSave[nIndex] );//上限
	nIndex++;
	if( m_sVarSave[nIndex]!=m_sVarSaveOld[nIndex] )
		SetDlgItemText( IDC_EDT_NORMAL_STATE,m_sVarSave[nIndex] );//正常状态
	nIndex++;
	if( m_sVarSave[nIndex]!=m_sVarSaveOld[nIndex] )
		SetDlgItemText( IDC_EDT_SET_VALUE,m_sVarSave[nIndex] );//设定值
	nIndex++;
	if( m_sVarSave[nIndex]!=m_sVarSaveOld[nIndex] )
		SetDlgItemText( IDC_EDT_REARM,m_sVarSave[nIndex] );//校正值
	nIndex++;
	if( m_sVarSave[nIndex]!=m_sVarSaveOld[nIndex] )
		SetDlgItemText( IDC_EDT_OFF_SET,m_sVarSave[nIndex] );//偏移量
	nIndex++;
	if( m_sVarSave[nIndex]!=m_sVarSaveOld[nIndex] )
		SetDlgItemText( IDC_EDT_UNIT,m_sVarSave[nIndex] );//单位
	nIndex++;
	if( m_sVarSave[nIndex]!=m_sVarSaveOld[nIndex] )
		SetDlgItemText( IDC_EDT_COLLECT_FREQ,m_sVarSave[nIndex] );//采集频率
	nIndex++;
	if( m_sVarSave[nIndex]!=m_sVarSaveOld[nIndex] )
		SetDlgItemText( IDC_EDT_COEF,m_sVarSave[nIndex] );//转换系数
	nIndex++;
	if( m_sVarSave[nIndex]!=m_sVarSaveOld[nIndex] )
		SetDlgItemText( IDC_EDT_ALARM_LEVEL,m_sVarSave[nIndex] );//报警级别
	else
		SetDlgItemText( IDC_EDT_ALARM_LEVEL,strAlarmLevel );
	nIndex++;
	if( m_sVarSave[nIndex]!=m_sVarSaveOld[nIndex] )
		SetDlgItemText( IDC_EDT_SAVE_DATA,m_sVarSave[nIndex] );//保存数值
	else
	{
		if( ((CButton *)GetDlgItem(IDC_CHK_SAVE_DATA))->GetCheck() )
		{
			GetDlgItem(IDC_EDT_SAVE_DATA)->SetWindowText("1");
		}
		else
		{
			GetDlgItem(IDC_EDT_SAVE_DATA)->SetWindowText("0");
		}
	}
	nIndex++;
	if( m_sVarSave[nIndex]!=m_sVarSaveOld[nIndex] )
		SetDlgItemText( IDC_EDT_COLLECT_THRAD_DATA,m_sVarSave[nIndex] );//是否实时采集数据
	else
	{
		if( ((CButton *)GetDlgItem(IDC_CHK_THREAD_COLLECT_DATA))->GetCheck() )
		{
			GetDlgItem(IDC_EDT_COLLECT_THRAD_DATA)->SetWindowText("1");
		}
		else
		{
			GetDlgItem(IDC_EDT_COLLECT_THRAD_DATA)->SetWindowText("0");
		}
	}
	nIndex++;
	if( m_sVarSave[nIndex]!=m_sVarSaveOld[nIndex] )
		SetDlgItemText( IDC_EDT_IS_MODIFY,m_sVarSave[nIndex] );//需要用户修改
	else
	{
		if( ((CButton *)GetDlgItem(IDC_CHK_IS_MODIFY))->GetCheck() )
		{
			GetDlgItem(IDC_EDT_IS_MODIFY)->SetWindowText("1");
		}
		else
		{
			GetDlgItem(IDC_EDT_IS_MODIFY)->SetWindowText("0");
		}
	}
	nIndex++;
	if( m_sVarSave[nIndex]!=m_sVarSaveOld[nIndex] )
		SetDlgItemText( IDC_EDT_SHOW_CURR_VALUE,m_sVarSave[nIndex] );//报警内容是否显示当前值
	else
	{
		if( ((CButton *)GetDlgItem(IDC_CHK_SHOW_CURR_VALUE))->GetCheck() )
		{
			GetDlgItem(IDC_EDT_SHOW_CURR_VALUE)->SetWindowText("1");
		}
		else
		{
			GetDlgItem(IDC_EDT_SHOW_CURR_VALUE)->SetWindowText("0");
		}
	}
	nIndex++;
	if( m_sVarSave[nIndex]!=m_sVarSaveOld[nIndex] )
		SetDlgItemText( IDC_EDT_IS_NOTICE,m_sVarSave[nIndex] );//是否触发远程报警
	else
	{
		if( ((CButton *)GetDlgItem(IDC_CHK_IS_NOTICE))->GetCheck() )
		{
			GetDlgItem(IDC_EDT_IS_NOTICE)->SetWindowText("1");
		}
		else
		{
			GetDlgItem(IDC_EDT_IS_NOTICE)->SetWindowText("0");
		}
	}
	nIndex++;
	if( m_sVarSave[nIndex]!=m_sVarSaveOld[nIndex] )
		SetDlgItemText( IDC_EDT_IDENTIFY_TIME,m_sVarSave[nIndex] );//辨识时间
	nIndex++;
	if( m_sVarSave[nIndex]!=m_sVarSaveOld[nIndex] )
		SetDlgItemText( IDC_EDT_REDETECT_TIME,m_sVarSave[nIndex] );//重新检测时间
	nIndex++;
	if( m_sVarSave[nIndex]!=m_sVarSaveOld[nIndex] )
		SetDlgItemText( IDC_EDT_NORMAL_IS_NOTICE,m_sVarSave[nIndex] );//状态恢复正常是否触发远程报警
	else
	{
		if( ((CButton *)GetDlgItem(IDC_CHK_NORMAL_IS_NOTICE))->GetCheck() )
		{
			GetDlgItem(IDC_EDT_NORMAL_IS_NOTICE)->SetWindowText("1");
		}
		else
		{
			GetDlgItem(IDC_EDT_NORMAL_IS_NOTICE)->SetWindowText("0");
		}
	}
}
void CAnalogSinglePropertyDlg::OnBnClickedBtnSetStatus()
{
	// TODO: 在此添加控件通知处理程序代码
	int iIndex = 0;
	CString str = m_DDXFields.GetAt(0).m_value;
	int nVarID = atoi(str);
	CString strDevUID = m_DDXFields.GetAt(1).m_value;

	CDlgVarStatusManager dlg;
	dlg.m_strUID = strDevUID;
	dlg.m_nVarID = nVarID;
	if( dlg.DoModal() == IDOK )
	{
		//CString sContent;
		//sContent.Format("%s %s< %s >",g_strEdit,g_strVariant,m_ctrlAnalogGrid.GetCell( nRow, 0 )->GetText() );
		//CDBInterface::GetInstancePtr()->InsertLogRecord( LOG_PARAM_SETSTATUS,0,"",(char *)(LPCTSTR)sContent );

		//pDevicesManager->SendNoticeToServer( CMD_NOTICE_READ_DB_VAR,CMD_OPERATE_EDIT,"",strDevUID,nVarID,"64320" );
	}

	CAnalog *pAnalog = pVariantsManager->FindAnalog(nVarID);
	if( pAnalog==NULL )
		return;
	list<string> listStatusID, listStatusDesc;
	list<string>::iterator itStatusID, itStatusDesc;

	int nCount = 0;
	nCount = CDBInterface::GetInstancePtr()->GetVarStatusList( 
		(char *)(LPCTSTR)dlg.m_strUID,
		dlg.m_nVarID,
		listStatusID,
		listStatusDesc);

	if( nCount > 0 )
	{
		list<int>::iterator it;
		list<CString>::iterator it_desc;

		for( it = pAnalog->m_listStatusID.begin(); it != pAnalog->m_listStatusID.end(); )
		{
			pAnalog->m_listStatusID.erase( it++ );
		}

		for( it_desc = pAnalog->m_listStatusDesc.begin(); it_desc != pAnalog->m_listStatusDesc.end(); )
		{
			pAnalog->m_listStatusDesc.erase( it_desc++ );
		}
	}

	for( itStatusID = listStatusID.begin(), itStatusDesc = listStatusDesc.begin();
		itStatusID != listStatusID.end(), itStatusDesc != listStatusDesc.end(); 
		itStatusID++, itStatusDesc++)
	{
		pAnalog->m_listStatusID.insert( pAnalog->m_listStatusID.end(), atoi((*itStatusID).c_str()) );
		pAnalog->m_listStatusDesc.insert( pAnalog->m_listStatusDesc.end(), (*itStatusDesc).c_str() );
	}
}
void CAnalogSinglePropertyDlg::OnBnClickedBtnAdvanced()
{
	CRect rc;
	this->GetWindowRect( rc );

	if( rc.Height()==265 )
	{
		SetWindowPos(NULL,0,0,605,480,SWP_NOMOVE);  
		m_btnAdvanced.SetWindowText( "高级<<" );
		//this->MoveWindow( 0,0,605,465 );

		if( m_operation==EDIT )
		{
			m_btnSetStatus.EnableWindow( true );
		}
	}
	else
	{
		SetWindowPos(NULL,0,0,605,265,SWP_NOMOVE);  
		m_btnAdvanced.SetWindowText( "高级>>" );
		//this->MoveWindow( 0,0,605,265 );

		if( m_operation==EDIT )
		{
			m_btnSetStatus.EnableWindow( false );
		}
	}
}
void CAnalogSinglePropertyDlg::OnBnClickedBtnDatePlan()
{
	// TODO: 在此添加控件通知处理程序代码
	int iIndex = 0;
	CString str = m_DDXFields.GetAt(0).m_value;
	int nVarID = atoi(str);
	CString strDevUID = m_DDXFields.GetAt(1).m_value;

	CDlgDatePlan dlg;
	dlg.m_nPlanType = PLAN_TYPE_EQUIP;

	dlg.m_strUid = strDevUID;
	dlg.m_nVarID = nVarID;
	if(dlg.DoModal() == IDOK) 
	{   
		//CString sContent;
		//sContent.Format("%s %s< %s >",g_strEdit,g_strVariant,m_ctrlAnalogGrid.GetCell( nRow, 0 )->GetText() );
		//CDBInterface::GetInstancePtr()->InsertLogRecord( LOG_PARAM_TIMEPLAN_EIDT,0,"",(char *)(LPCTSTR)sContent );

		//pDevicesManager->SendNoticeToServer( CMD_NOTICE_READ_DB_VAR,CMD_OPERATE_EDIT,"",dlg.m_strUid,dlg.m_nVarID,"64320" );

		//pVariantsManager->AllocDatePlan();
	}
}
//得到不合法的变量问题
CString CAnalogSinglePropertyDlg::GetInvalidMessage( CString sVarName,int iInitValue,int iMinValue,int iMaxValue,int iLowerValue,int iUpperValue,int iNormalValue,int iWarningLevel,int iIdentifyTime )
{
	CString sRet,s;

	if(sVarName=="" )
	{
		s = "变量名不能为空； ";
		sRet += s;
	}

	for( int i=0;i<sVarName.GetLength();i++ )
	{
		if( (sVarName[i]>='0'&&sVarName[i]<='9') || (sVarName[i]>='a'&&sVarName[i]<='z') || (sVarName[i]>='A'&&sVarName[i]<='Z') || (sVarName[i]=='_' ))
		{
			if( i==0 && ( (sVarName[i]>='0'&&sVarName[i]<='9') || (sVarName[i]=='_' ) ) )
			{
				s = "变量名有误,只能是字母开头； ";
				sRet += s;
				break;
			}
		}
		else
		{
			s = "变量名有误,含有非法字符； ";
			sRet += s;
			break;
		}
	}

	if( iMaxValue==0 )
	{
		s = "变量最大值不能为0； ";
		sRet += s;
	}

	if( iMinValue>iMaxValue )
	{
		s = "变量最小值不能大于变量最大值； ";
		sRet += s;
	}
	
	if( iInitValue<iMinValue || iInitValue>iMaxValue )
	{
		s = "变量初始值有误,不在最小最大值之间； ";
		sRet += s;
	}

	if( iLowerValue>iUpperValue )
	{
		s = "变量下限与上限设置有误； ";
		sRet += s;
	}

	if( iLowerValue==0 && iUpperValue==0 )
	{
		if( iNormalValue != iInitValue )
		{
			s = "状态变量的正常状态与初始值不相等； ";
			sRet += s;
		}
	}
	else
	{
		if( iInitValue<iLowerValue || iInitValue>iUpperValue )
		{
			s = "变量初始值有误,不在下限与上限之间； ";
			sRet += s;
		}
	}

	//if( iWarningLevel==0 )
	//{
	//	s = "变量的报警级别为0； ";
	//	sRet += s;
	//}

	if( iIdentifyTime==0 )
	{
		s = "变量的辨识时间不能等于0； ";
		sRet += s;
	}

	return sRet;
}