repos_ecs/其他2015后/Hello.cpp

#include "Hello.h"

#define SEGMENTS 500
#define PI 3.1415926535897932384626433832795

CMyApp myApp;

#define CLKSCALE                ((INT)8000)
// 表盘
typedef struct
{
	SHORT sin;
	SHORT cos;
} TRIG;

TRIG CirTab[] = {     // circle sin, cos, table
	{ -7999, -0     },
	{ -7956, -836   },
	{ -7825, -1663  },
	{ -7608, -2472  },
	{ -7308, -3253  },
	{ -6928, -4000  },
	{ -6472, -4702  },
	{ -5945, -5353  },
	{ -5353, -5945  },
	{ -4702, -6472  },
	{ -3999, -6928  },
	{ -3253, -7308  },
	{ -2472, -7608  },
	{ -1663, -7825  },
	{ -836 , -7956  },

	{ 0,     -7999  },
	{ 836,   -7956  },
	{ 1663,  -7825  },
	{ 2472,  -7608  },
	{ 3253,  -7308  },
	{ 3999,  -6928  },
	{ 4702,  -6472  },
	{ 5353,  -5945  },
	{ 5945,  -5353  },
	{ 6472,  -4702  },
	{ 6928,  -4000  },
	{ 7308,  -3253  },
	{ 7608,  -2472  },
	{ 7825,  -1663  },
	{ 7956,  -836   },

	{ 8000,  0      },
	{ 7956,  836    },
	{ 7825,  1663   },
	{ 7608,  2472   },
	{ 7308,  3253   },
	{ 6928,  4000   },
	{ 6472,  4702   },
	{ 5945,  5353   },
	{ 5353,  5945   },
	{ 4702,  6472   },
	{ 3999,  6928   },
	{ 3253,  7308   },
	{ 2472,  7608   },
	{ 1663,  7825   },
	{ 836,   7956   },

	{ 0,     7999   },
	{ -836,  7956   },
	{ -1663, 7825   },
	{ -2472, 7608   },
	{ -3253, 7308   },
	{ -4000, 6928   },
	{ -4702, 6472   },
	{ -5353, 5945   },
	{ -5945, 5353   },
	{ -6472, 4702   },
	{ -6928, 3999   },
	{ -7308, 3253   },
	{ -7608, 2472   },
	{ -7825, 1663   },
	{ -7956, 836    }
};
// End
BOOL CMyApp::InitInstance()
{
	// Initialize GDI+.
	Gdiplus::GdiplusStartup(&gdiplusToken, &gdiplusStartupInput, NULL);

	m_pMainWnd = new CMainWindow();
	m_pMainWnd->ShowWindow(m_nCmdShow);
	m_pMainWnd->UpdateWindow();
	return CWinApp::InitInstance();
}

BEGIN_MESSAGE_MAP(CMainWindow,CFrameWnd)
	ON_WM_PAINT()
END_MESSAGE_MAP()

CMainWindow::CMainWindow()
{
	Create(NULL,_T("The Hello Application"));
	InitCLR();
}


void CMainWindow::InitCLR()
{
	m_nLowwer = 0;
	m_nUpper = 1000;
	m_clrLine = RGB(250,0,0);
	m_nLineWidth = 1;
	m_fCurrentValue = 83.0;

	m_clrCurrentLine = RGB(105,220,200);
	//m_clrCurrentBack = RGB(250,250,225);
	m_clrCurrentBack = RGB(99,99,99);
	m_clrCurrentFore = RGB(80,250,230);
}

void CMainWindow::Draw(CDC* pDC)
{	
	CRect rectRgn = m_rctCurrent;
	COLORREF clrPen = m_clrCurrentLine;
	COLORREF clrBrush = m_clrCurrentBack;
	COLORREF clrText = m_clrCurrentFore;

	/*if (!bRuning) 
	{
	rectRgn = m_rect;
	clrPen = m_clrLine;
	clrBrush = m_clrBack;
	clrText = m_clrFore;
	}
	if (!m_bVariant)
	m_strCurrentCaption = m_strCaption;*/

	rectRgn.NormalizeRect();
	CBrush brush(clrText);
	CBrush *prebrush = pDC->SelectObject(&brush);
	pDC->FillSolidRect(rectRgn, clrBrush);

	int top = rectRgn.top+10;
	int middle = rectRgn.bottom - 40;
	if ( middle < top ) middle = top;
	CRect rectPie = CRect(rectRgn.left + 10, top, rectRgn.right - 10, top + 2*(middle-top));
	//pDC->Rectangle(rectPie.left,rectPie.top,rectPie.right,rectRgn.bottom-38);;
	CPoint s = CPoint(rectRgn.right - 10, middle);
	CPoint e = CPoint(rectRgn.left + 10, middle);

	INT		HorzRes = pDC->GetDeviceCaps(HORZRES);
	INT		VertRes = pDC->GetDeviceCaps(VERTRES);
	INT		VertSize = pDC->GetDeviceCaps(VERTSIZE);
	INT		HorzSize = pDC->GetDeviceCaps(HORZSIZE);
	m_lAspectN = ((LONG)VertRes * 100) / (LONG)VertSize;
	m_lAspectD = ((LONG)HorzRes * 100) / (LONG)HorzSize;	

	// 画指针;
	//CPen pen( PS_SOLID, m_nLineWidth, m_clrLine );
	//CPen* pOldPen = pDC->SelectObject(&pen);
	//pDC->MoveTo(rectPie.CenterPoint());

	// 根据外部值,画直线(显示指针位置);
	//rectPie.DeflateRect(5,5,5,5);
	//CRgn  rgn;   
	//rgn.CreateEllipticRgnIndirect( rectPie );   
	//float angle = 180-180*(m_fCurrentValue-m_nLowwer)/(m_nUpper-m_nLowwer);
	//int bLeft = 1;
	//if ( angle < 90 ) bLeft = -1;

	//CPoint lastPoint;
	//int clockRadius = min(m_rect.Width()/2 - 10 , m_rect.Height() - 50) - 10;
	//lastPoint.x = rectPie.CenterPoint().x + clockRadius*cos(angle/180*PI);
	//lastPoint.y = rectPie.CenterPoint().y - clockRadius*sin(angle/180*PI) ; // 差了个精度;
	//lastPoint.y = rectPie.CenterPoint().y - clockRadius*sin(angle/180*PI) + 1;

	// 根据传参,画直线的终点;
	//pDC->LineTo(lastPoint);
	//pDC->SelectObject(pOldPen);

	// 画边框;
	pDC->DrawEdge(&rectRgn,BDR_RAISEDOUTER,BF_RECT);
	rectRgn.DeflateRect(1,1);
	pDC->DrawEdge(rectRgn, BDR_RAISEDOUTER, BF_RECT);	
	rectRgn.left = rectRgn.left+5;
	rectRgn.right = rectRgn.right-5;
	rectRgn.top = rectRgn.top+5;
	rectRgn.bottom = rectRgn.bottom-35;
	pDC->DrawEdge(&rectRgn,BDR_SUNKENOUTER,BF_RECT);
	pDC->SelectObject(prebrush);

	//pDC->Rectangle(rectRgn);
//	pDC->SelectObject(pOldPen);

	// 画表盘弧形刻度值;
	//DrawFace(pDC);
	int nRadius[3];
	nRadius[0] = rectRgn.Height()/2 - 10;
	nRadius[1] = nRadius[0] - 60;
	nRadius[2] = nRadius[1] - 80;

	pDC->SetWindowExt(rectRgn.Width(),rectRgn.Height());

	DrawWatch(
		pDC,
		rectRgn,
		0,				// 最小范围值;
		1000,			// 最大范围值;
		m_rect.Width()/10 + m_rect.Height()/10,				// 当前范围值;
		"单位:M",		// 量程单位;
		180,			// 范围弧度;
		nRadius,		// 内弧半径;
		10,				// 大刻度数;
		10);			    // 小刻度数;

	//DeleteObject( pen );
	DeleteObject( brush );

	//DeleteObject( rgn );
}
void CMainWindow::DrawFace(CDC* pDC)
{
	INT        i;
	RECT       tRect;
	tagPOINT   clockCenter;	// 表盘针形起点;

	m_rect = m_rctCurrent;

	char c[5] = {0};
	int clockRadius = min(m_rect.Width()/2 - 10 , m_rect.Height() - 50);
	clockCenter.y = m_rect.bottom - 20;
	clockCenter.x = m_rect.left + m_rect.Width()/2;

#if 0
	int nSmall = (m_nUpper - m_nLowwer) / 100;
	int nBig = nSmall / 5;

	POINT ptStart;
	POINT ptEnd;
	pDC->Arc(&m_rect,ptStart,ptEnd);
#endif 

	for (i=0; i < 31; i++) 
	{
		tRect.top  = (INT)(((LONG)(CirTab[i].cos) * clockRadius) / CLKSCALE + clockCenter.y - 20);
		tRect.left = (INT)(((LONG)(CirTab[i].sin) * clockRadius) / CLKSCALE + clockCenter.x);

		if (i % 5) 
		{
			tRect.right = tRect.left + 2;
			tRect.bottom = tRect.top + 2;
			pDC->FillSolidRect(&tRect, RGB(255,0,0));
		}
		else 
		{
			tRect.right = tRect.left + 2;
			tRect.bottom = tRect.top + 2;

			if((i / 5) == 0)
				_itoa(m_nLowwer, c  , 10);
			else
				_itoa((m_nUpper - m_nLowwer) * i / 30, c  , 10);

			pDC->SetTextColor(m_clrFore);
			// 以下TextOut,文本的输出应该放在弧形刻度内侧;而不是放在中间;
			// pDC->TextOut(tRect.left-1,tRect.top-2,c,(int)strlen(c));
			pDC->TextOut(tRect.left-1,tRect.top-2,c,(int)strlen(c));
		}
	}
}

void CMainWindow::OnPaint()
{
	CRect rect;
	GetClientRect(&rect);
	CPaintDC dc(this);
	dc.SetBkMode(TRANSPARENT);

	int nWidth = rect.Width();
	int nHeight = rect.Height();
#if 1
	m_rect = rect;
	m_rctCurrent = m_rect;
	Draw((CDC*)&dc);
#endif

#if 1
	TCHAR szTextOut[256] = {0};
	sprintf_s(szTextOut,"当前窗口大小:%d * %d,倍率 = %lf",nWidth,nHeight,(double)nWidth/nHeight);
	CPen pen(PS_SOLID,1,RGB(105,220,210));
	dc.SelectObject(pen);
	dc.SetTextColor(RGB(105,220,250));
	CRect rtShow(rect.left + 20, rect.top + 40,rect.right ,rect.bottom);
	dc.DrawText(szTextOut, -1, &rtShow, 0);
#endif

#if 0
	dc.SetViewportOrg(nWidth/2,nHeight/2);

	int nRadius[]=
	{
		220,
		160,
		90
	};
	DrawWatch(
		(CDC *)&dc,
		rect,
		-500,				// 最小范围值;
		500,			// 最大范围值;
		nHeight/10 + nWidth/10,				// 当前范围值;
		"单位:M",		// 量程单位;
		320,			// 范围弧度;
		nRadius,		// 内弧半径;
		10,				// 大刻度数;
		10);			    // 小刻度数;
#endif
}
 // GDI弧度的起始位置跟数学上的不一样,在GDI中,弧度是从X轴负方向(左边),顺时针开始计算的;
void CMainWindow::DrawWatch( 
	CDC *pDC,
	CRect &Wrect,
	float fMin,	                    // 最小范围值;
	float fMax,						// 最大范围值;
	const float &fValue,            // 当前值;
	CString strUnit,			    // 量程单位;
	const float &fRadian,           // 范围弧度大小;
	int nRadius[3],           // 内弧半径; 
	const int &nTable,              // 大刻度数;
	const int &nScale               // 小刻度数; 
	)
{
	if(fMin>fValue)
	{
		fMin=fValue;
	}
	if(fValue>fMax)
	{
		fMax=fValue;
	}
	int nWidth,nHeight;
	//nWidth = nHeight = 200;
	//nWidth = m_rctCurrent.Width();
	//nHeight = m_rctCurrent.Height();

	CRect rect = Wrect; //(-nWidth,nHeight,nWidth,-nHeight);
	nWidth = Wrect.Width();
	nHeight = Wrect.Height();
	//int nTable = 10; // 大格;
	//int nScale = 5; // 每小段里面的小格;

	COLORREF Green(RGB(0,255,0));
	COLORREF Blue(RGB(0,0,255));
	COLORREF Cyan(RGB(92,92,92));
	COLORREF Yellow(RGB(255,255,0));
	COLORREF Red(RGB(255,0,0));
	COLORREF SkyBlue(RGB(0,128,255));
	COLORREF LineColor(RGB(128,0,0));  // 巧克力色;
	
	// 张开的弧度;
	//float fRadian = 60;

	//// 同心圆半径;
	//int nRadius[]=
	//{
	//	220,
	//	160,
	//	90
	//};

	// 圆心;
	//CPoint ptCenter;
	/*if ( fRadian >180 )
	{
		ptCenter.x = Wrect.left + nWidth/2 ;
		ptCenter.y = Wrect.top + nHeight/2 ;

		nRadius[0] = nHeight/2 - 10;
		nRadius[1] = nRadius[0]*5/6 - 10;
		nRadius[2] = nRadius[1]*2/7 - 10;
	}
	else if( fRadian >= 0 && fRadian <= 180)
	{
		ptCenter.x = Wrect.left + nWidth/2 ;
		ptCenter.y = Wrect.bottom;

		nRadius[0] = nHeight - 10;
		nRadius[1] = nRadius[0]*5/6 - 10;
		nRadius[2] = nRadius[1]*2/7 - 10;
	}*/
	// 圆心;
	CPoint ptCenter;
	if ( fRadian > 180 )
	{
		ptCenter.x = rect.left + nWidth/2 ;
		ptCenter.y = rect.top + nHeight/2 -6 ;

		if ( nHeight < nWidth)
		{
			nRadius[0] = nHeight/2 - 10;
		}else
			nRadius[0] = nWidth/2 - 10;

		nRadius[1] = nRadius[0]*5/6 - 10;
		nRadius[2] = nRadius[1]*2/7 - 10;
	}
	else if( fRadian > 0 && fRadian <= 180)
	{
		ptCenter.x = rect.left + nWidth/2 ;
		ptCenter.y = rect.bottom - 6;

		if ( fRadian == 180 )
		{
			if ( nHeight < nWidth/2)
				nRadius[0] = nHeight - 10;
			else
				nRadius[0] = nWidth/2 - 10;
		}else
		{
			if ( nHeight < nWidth/2)
				nRadius[0] = nHeight - 10;
			else
				nRadius[0] = nWidth/2 - 10;
		}

		nRadius[1] = nRadius[0]*5/6 - 10;
		nRadius[2] = nRadius[1]*2/7 - 10;
	}
	
	//CPoint ptCenter( 0 , 0 );

	// 刻度长度;
	int nLongScal = 16;
	int nShortScal = 6;
	
	CPen LinePen(PS_SOLID,2,LineColor);  // 画笔颜色;
	pDC->SelectObject(LinePen);

	// 画3段弧;
	CRect rtArc1(ptCenter.x - nRadius[0], ptCenter.y - nRadius[0], ptCenter.x - nRadius[0] + 2*nRadius[0] + 1, ptCenter.y - nRadius[0] + 2*nRadius[0] + 1);
	CRect rtArc2(ptCenter.x - nRadius[1], ptCenter.y - nRadius[1], ptCenter.x - nRadius[1] + 2*nRadius[1] + 1, ptCenter.y - nRadius[1] + 2*nRadius[1] + 1);
	CRect rtArc3(ptCenter.x - nRadius[2], ptCenter.y - nRadius[2], ptCenter.x - nRadius[2] + 2*nRadius[2] + 1, ptCenter.y - nRadius[2] + 2*nRadius[2] + 1);

	CPoint ptArcStart,ptArcEnd;
	double rad =  ((180-fRadian)/2)/180*PI ;
	ptArcEnd.x = ptCenter.x - nRadius[0]*cos(rad);
	ptArcEnd.y = ptCenter.y - nRadius[0]*sin(rad);

	rad = ( (180-fRadian)/2 + fRadian )/180*PI ;
	ptArcStart.x = ptCenter.x - nRadius[0]*cos(rad);
	ptArcStart.y = ptCenter.y - nRadius[0]*sin(rad);

	// 画弧,是从起点逆时针到终点,所以要交换点位置;
	pDC->Arc(rtArc1,ptArcStart,ptArcEnd);
	pDC->Arc(rtArc2,ptArcStart,ptArcEnd);
	CPen LinePen1(PS_SOLID,1,LineColor);  // 画笔颜色;
	pDC->SelectObject(LinePen1);
	pDC->Arc(rtArc3,ptArcStart,ptArcEnd);

	// 画 刻度(分段);
	for( int i = 0; i <= nTable*nScale; i++ ) // 总刻度;
	{
		CPoint pt0,pt1;
		double f0 = ( (180-fRadian)/2 + fRadian/(nTable*nScale)*i )/180*PI; // 刻度数对应的弧度;
		pt1.x = ptCenter.x + nRadius[1]*cos(f0);
		pt1.y = ptCenter.y - nRadius[1]*sin(f0);
		if( i%nTable == 0 )
		{
			pt0.x = ptCenter.x + (nRadius[1]+nLongScal)*cos(f0);
			pt0.y = ptCenter.y - (nRadius[1]+nLongScal)*sin(f0);

			CString str;
			str.Format(_T("%.0f"),fMax-(fMax-fMin)/(nTable*nScale)*i);
			// 获取文本所占的大小;
			// 还是不标准位置,应该还有个系数跟弧度有关;
			CRect textrc; // 要使得矩形中心点 在直线 pt0~pt1上;
			CSize ftszie = pDC->GetTextExtent(str); 

			// 矩形对角线长度/2;
			double dRtLength = sqrt((pow((float)ftszie.cx,2) + pow((float)ftszie.cy,2)))/2;
			CPoint ptText;
			ptText.x = ptCenter.x + (nRadius[1] + nLongScal + dRtLength)*cos(f0);
			ptText.y = ptCenter.y - (nRadius[1] + nLongScal + dRtLength)*sin(f0);
			textrc.left = ptText.x -  ftszie.cx/2;
			textrc.top = ptText.y -  ftszie.cy/2;
			textrc.right = ptText.x + ftszie.cx/2;
			textrc.bottom =  ptText.y +  ftszie.cy/2 ;

			pDC->SetBkColor(Green);
			pDC->SetTextColor(Blue);
			pDC->DrawText(str, &textrc,0);

			CPoint pt2,pt3;
			int nGap = 5;
			pt3.x = ptCenter.x +(nRadius[0]+0)*cos(f0);
			pt3.y = ptCenter.y -(nRadius[0]+0)*sin(f0);
			pt2.x = ptCenter.x +(nRadius[0]-nGap)*cos(f0);
			pt2.y = ptCenter.y -(nRadius[0]-nGap)*sin(f0);

			CPen BigPen(PS_SOLID,2,Yellow);  // 画笔颜色;
			pDC->SelectObject(BigPen);

			pDC->MoveTo(pt2);
			pDC->LineTo(pt3);

			pDC->MoveTo(pt0);
			pDC->LineTo(pt1);

			DeleteObject(BigPen);
		}
		else
		{
			pt0.x = ptCenter.x + (nRadius[1]+nShortScal)*cos(f0);
			pt0.y = ptCenter.y - (nRadius[1]+nShortScal)*sin(f0);

			CPen SmallPen(PS_SOLID,1,Blue);  // 画笔颜色;
			pDC->SelectObject(SmallPen);

			pDC->MoveTo(pt0);
			pDC->LineTo(pt1);

			DeleteObject(SmallPen);
		}
	}

	CFont font;
	font.CreatePointFont(150,_T("Times New Roman"));
	pDC->SelectObject(font);

	// 输出文本:单位;
	CRect UnitRc;
	CSize ftsize = pDC->GetTextExtent(strUnit);
	UnitRc.left = ptCenter.x - ftsize.cx/2;
	//UnitRc.top = ptCenter.y - (nRadius[0]-nRadius[1]+nRadius[2] + ftsize.cy/2);
	UnitRc.top = ptCenter.y - (nRadius[1]-nRadius[2])/2 - nRadius[2] - ftsize.cy/2; // 使居中;
	UnitRc.right = UnitRc.left + ftsize.cx;
	UnitRc.bottom = UnitRc.top + ftsize.cy;
	pDC->SetTextColor(Red);
	pDC->DrawText(strUnit,&UnitRc,0);

	// 输出文本:当前数据;
	// 要保持在圆心上方;
	CRect DataRc;
	CString strData;
	strData.Format(_T("当前值:%.0f"),fValue);
	ftsize = pDC->GetTextExtent(strData);
	DataRc.left = ptCenter.x - ftsize.cx/2;
	//DataRc.top = ptCenter.y - (nRadius[2]-nLongScal);
	DataRc.top = ptCenter.y - (nRadius[2]/2 - nLongScal); // 使居中;
	DataRc.right = DataRc.left + ftsize.cx;
	DataRc.bottom = DataRc.top + ftsize.cy;
	pDC->DrawText(strData,&DataRc,0);

	// 画指针;
	CPen PointPen(PS_SOLID,2,Green);
	pDC->SelectObject(PointPen);
	CPoint pt0,pt1;
	double f0 = ((180-fRadian)/2+fRadian/(fMax-fMin)*(-fValue+fMax))/180*PI;

	pt0.x = ptCenter.x + (nRadius[2]*cos(f0));
	pt0.y = ptCenter.y - (nRadius[2]*sin(f0));
	pt1.x = ptCenter.x + ((nRadius[1]+nShortScal/2)*cos(f0));
	pt1.y = ptCenter.y - ((nRadius[1]+nShortScal/2)*sin(f0));

	pDC->MoveTo(pt0);
	pDC->LineTo(pt1);
}

int CMyApp::ExitInstance()
{
	// TODO: 在此添加专用代码和/或调用基类
	Gdiplus::GdiplusShutdown(gdiplusToken);
	return CWinApp::ExitInstance();
}