// BeautifySkinFrom2.cpp : implementation file
//
#include "stdafx.h"
#include "ylgl.h"
#include "BeautifySkinFrom2.h"
#include "MyMdi.H"
#include "ModifyDinDan.h"
#include "ImportPhoto.h"
#include "ShowPic.h"
#include "SelectPhotoDlg.h"
#include "./helper/ffsco.h"
#include "ShowCut.h"
#include "CompressOption.h"
#include "NetShareInfo.h"
#include "DlgChuXiuInfo.h"

#ifdef _DEBUG
#define new DEBUG_NEW
#undef THIS_FILE
static char THIS_FILE[] = __FILE__;
#endif

IMPLEMENT_DYNCREATE(BeautifySkinFrom2, MyFormView)
BeautifySkinFrom2::BeautifySkinFrom2(): MyFormView(BeautifySkinFrom2::IDD)
{
	m_filter = _T("");
	m_nAdd = 0;

	if (g_bAllBranch)
	{
		m_nAdd = 1;
	}
}

BeautifySkinFrom2::~BeautifySkinFrom2()
{
}

void BeautifySkinFrom2::DoDataExchange(CDataExchange* pDX)
{
	MyFormView::DoDataExchange(pDX);
	DDX_Control(pDX, IDC_COMBO1, m_combo1);
	DDX_Control(pDX, IDC_LIST2, m_FurtherList);
	DDX_Control(pDX, IDC_STATIC1, m_static1);
	DDX_CBString(pDX, IDC_COMBO1, m_filter);
}

BEGIN_MESSAGE_MAP(BeautifySkinFrom2, MyFormView)
	ON_BN_CLICKED(IDC_BUTclose, OnBUTclose)
	ON_BN_CLICKED(IDC_BUTTON1, OnButton1)
	ON_CBN_SELCHANGE(IDC_COMBO1, OnSelchangeCombo1)
	ON_WM_TIMER()
	ON_BN_CLICKED(IDC_BUTimportphoto, OnBUTimportphoto)
	ON_BN_CLICKED(IDC_BUTshowphoto, OnBUTshowphoto)
	ON_BN_CLICKED(IDC_BUTexportphoto, OnBUTexportphoto)
	ON_BN_CLICKED(IDC_BUTexportphoto2, OnBUTexportphoto2)
	ON_BN_CLICKED(IDC_BUTTON2, OnButton2)
	ON_NOTIFY(LVN_ITEMCHANGED, IDC_LIST2, OnItemchangedList2)
	ON_NOTIFY(NM_CLICK, IDC_LIST2, OnClickList2)
	ON_BN_CLICKED(IDC_BTNSEARCHFILTER, OnBtnsearchfilter)
	ON_BN_CLICKED(IDC_BUTprint3, OnBUTprint3)
END_MESSAGE_MAP()


#ifdef _DEBUG
void BeautifySkinFrom2::AssertValid() const
{
	MyFormView::AssertValid();
}

void BeautifySkinFrom2::Dump(CDumpContext& dc) const
{
	MyFormView::Dump(dc);
}
#endif 

void BeautifySkinFrom2::OnInitialUpdate()
{
	MyFormView::OnInitialUpdate();

	CMyMdi Mdi;
	Mdi.SetSubView((CWnd*)GetParent(), (CWnd*)this);

	CRect rc2;
	GetWindowRect(rc2);
	::MoveWindow(m_hWnd, g_rc.left, g_rc.top, g_rc.Width(), g_rc.Height(), TRUE);
	EnumChildWindows(m_hWnd, (WNDENUMPROC)EnumChildProc, 0);

	int idarray[] = { IDC_BUTprint3, IDC_BUTexportphoto, IDC_BUTimportphoto, IDC_BUTshowphoto, IDC_BUTexportphoto2, IDC_BUTclose };
	int idcount = 6;
	int btnwid;
	CRect prerc;
	for (int a = idcount - 2; a >= 0; a--)
	{
		GetDlgItem(idarray[a + 1])->GetWindowRect(prerc);
		ScreenToClient(prerc);
		GetDlgItem(idarray[a])->GetWindowRect(rc2);
		ScreenToClient(rc2);
		btnwid = rc2.Width();
		rc2.right = prerc.left;
		rc2.left = rc2.right - btnwid;
		GetDlgItem(idarray[a])->MoveWindow(rc2);
	}

	m_static1.SetFont(&g_titlefont);

	if (g_bAllBranch == 0)
	{
#ifdef CHILD_VERSION
		m_FurtherList.SetHeadings("订单号,100;家长姓名,100;宝宝姓名,100;修片,100;选片,100;选片日期,100;精修,100;精修日期,100;设计,100;看设计日期,100;加急,100;取件日期,100;修片人,100;精修人,100;接单人,100;套系名称,100;套系价格,100;手机,100;固定电话,100");
#else
		m_FurtherList.SetHeadings("订单号,100;男宾姓名,100;女宾姓名,100;修片,100;选片,100;选片日期,100;精修,100;精修日期,100;设计,100;看设计日期,100;加急,100;取件日期,100;修片人,100;精修人,100;接单人,100;套系名称,100;套系价格,100;男宾电话,100;女宾电话,100");
#endif
		m_FurtherList.LoadColumnInfo(122);
	}
	else
	{
#ifdef CHILD_VERSION
		m_FurtherList.SetHeadings("店名,100;订单号,100;家长姓名,100;宝宝姓名,100;修片,100;选片,100;选片日期,100;精修,100;精修日期,100;设计,100;看设计日期,100;加急,100;取件日期,100;修片人,100;精修人,100;接单人,100;套系名称,100;套系价格,100;手机,100;固定电话,100");
#else
		m_FurtherList.SetHeadings("店名,100;订单号,100;男宾姓名,100;女宾姓名,100;修片,100;选片,100;选片日期,100;精修,100;精修日期,100;设计,100;看设计日期,100;加急,100;取件日期,100;修片人,100;精修人,100;接单人,100;套系名称,100;套系价格,100;男宾电话,100;女宾电话,100");
#endif
		m_FurtherList.LoadColumnInfo(198);
		GetDlgItem(IDC_BUTprint3)->ShowWindow(1);
	}

	GetData();

	m_combo1.AddString(g_user.name);
	m_combo1.GetWindowRect(rc2);
	ScreenToClient(rc2);
	rc2.bottom += 200;
	m_combo1.MoveWindow(rc2);
	GetDlgItem(IDC_BUTclose)->GetWindowRect(rc2);
	SetComboHei(&m_combo1, rc2.Height());

	GetDlgItem(IDC_BUTexportphoto)->EnableWindow(IsHasRights2new(10));
	GetDlgItem(IDC_BUTexportphoto2)->EnableWindow(IsHasRights2new(11));
}

void BeautifySkinFrom2::FillGrid(BOOL bStatus)
{
	if (g_bSearchFilter)
	{
		m_FurtherList.DeleteAllItems2();
		int ii = 0;
		m_FurtherList.m_arLabels.SetSize(m_List1array.GetSize(), 1);
		int count = 0;
		{
			for (ii = 0; ii < m_FurtherList.m_arLabels.GetSize(); ii++)
			{
				// 条件查询==精修日期
				if (g_filterdate1 != "")
				{
					if (m_List1array.ElementAt(ii).ElementAt(7 + m_nAdd) < g_filterdate1 || m_List1array.ElementAt(ii).ElementAt(7 + m_nAdd) > g_filterdate2)
						continue;
				}
				if (g_waiter1 != "")
				{
					// 条件查询==精修人;
					if (m_List1array.ElementAt(ii).ElementAt(13 + m_nAdd) != g_waiter1)
						continue;
				}
				if (g_bAllBranch && g_filterbranch != "")
				{
					if (m_List1array.ElementAt(ii).ElementAt(0) != g_filterbranch)
						continue;
				}

				if (1)
				{
					m_FurtherList.m_arLabels.ElementAt(count++).Copy(m_List1array.ElementAt(ii));
				}
			}
		}
		m_FurtherList.m_arLabels.SetSize(count, 1);
		ii = count;
		m_FurtherList.m_LabelCount = ii;
		m_FurtherList.SetItemCountEx(ii);
		CString str;
		str.Format("单数:%d", ii);
		SetDlgItemText(IDC_STATIC2, str);
	}
	else
	{
		m_FurtherList.DeleteAllItems2();
		int ii = 0;
		m_FurtherList.m_arLabels.SetSize(m_List1array.GetSize(), 1);
		int count = 0;
		if (m_filter.IsEmpty())
		{
			if (bStatus)
			{
				for (ii = 0; ii < m_FurtherList.m_arLabels.GetSize(); ii++)
				{
					// 条件查询==选片状态&&精修状态;
					if (m_List1array.ElementAt(ii).ElementAt(4 + m_nAdd) == "OK" && m_List1array.ElementAt(ii).ElementAt(6 + m_nAdd) != "OK")
						m_FurtherList.m_arLabels.ElementAt(count++).Copy(m_List1array.ElementAt(ii));
				}
			}
			else
			{
				for (ii = 0; ii < m_FurtherList.m_arLabels.GetSize(); ii++)
				{
					m_FurtherList.m_arLabels.ElementAt(count++).Copy(m_List1array.ElementAt(ii));
				}
			}
		}
		else
		{
			if (bStatus)
			{
				int type = GetType(m_filter);
				if (type == 1)//电话
				{
					for (ii = 0; ii < m_FurtherList.m_arLabels.GetSize(); ii++)
					{
						// 查询条件==选片状态&&精修状态&&（手机1||手机2）
						if (m_List1array.ElementAt(ii).ElementAt(4 + m_nAdd) == "OK" &&
							m_List1array.ElementAt(ii).ElementAt(6 + m_nAdd) != "OK" && 
							(m_List1array.ElementAt(ii).ElementAt(17 + m_nAdd).Find(m_filter) != -1 || m_List1array.ElementAt(ii).ElementAt(18 + m_nAdd).Find(m_filter) != -1))
						{
							m_FurtherList.m_arLabels.ElementAt(count++).Copy(m_List1array.ElementAt(ii));
						}
					}
				}
				else if (type == 2)//拼音
				{
					m_filter.MakeUpper();
					for (ii = 0; ii < m_FurtherList.m_arLabels.GetSize(); ii++)
					{
						// 查询条件==选片状态&&精修状态&&（拼音1||拼音2）
						if (m_List1array.ElementAt(ii).ElementAt(4 + m_nAdd) == "OK" &&
							m_List1array.ElementAt(ii).ElementAt(6 + m_nAdd) != "OK" && 
							(m_List1array.ElementAt(ii).ElementAt(19 + m_nAdd).Find(m_filter) != -1 ||m_List1array.ElementAt(ii).ElementAt(20 + m_nAdd).Find(m_filter) != -1))
						{
							m_FurtherList.m_arLabels.ElementAt(count++).Copy(m_List1array.ElementAt(ii));
						}
					}
				}
				else
				{
					for (ii = 0; ii < m_FurtherList.m_arLabels.GetSize(); ii++)
					{
						// 查询条件==选片状态&&精修状态&&（……）
						if (m_List1array.ElementAt(ii).ElementAt(4 + m_nAdd) == "OK" && 
							m_List1array.ElementAt(ii).ElementAt(6 + m_nAdd) != "OK" && 
							(m_List1array.ElementAt(ii).ElementAt(0).Find(m_filter) != -1 || \
							m_List1array.ElementAt(ii).ElementAt(1).Find(m_filter) != -1 || \
							m_List1array.ElementAt(ii).ElementAt(2).Find(m_filter) != -1 || \
							m_List1array.ElementAt(ii).ElementAt(3).Find(m_filter) != -1 || \
							m_List1array.ElementAt(ii).ElementAt(12).Find(m_filter) != -1 || \
							m_List1array.ElementAt(ii).ElementAt(13).Find(m_filter) != -1 || \
							m_List1array.ElementAt(ii).ElementAt(14).Find(m_filter) != -1 || \
							m_List1array.ElementAt(ii).ElementAt(15).Find(m_filter) != -1 || \
							m_List1array.ElementAt(ii).ElementAt(16).Find(m_filter) != -1 || \
							m_List1array.ElementAt(ii).ElementAt(17).Find(m_filter) != -1 || \
							m_List1array.ElementAt(ii).ElementAt(18).Find(m_filter) != -1 || \
							m_List1array.ElementAt(ii).ElementAt(19).Find(m_filter) != -1))
						{
							m_FurtherList.m_arLabels.ElementAt(count++).Copy(m_List1array.ElementAt(ii));
						}
					}
				}
			}
			else
			{
				int type = GetType(m_filter);
				if (type == 1)//电话
				{
					for (ii = 0; ii < m_FurtherList.m_arLabels.GetSize(); ii++)
					{
						// 查询条件==手机1||手机2
						if (m_List1array.ElementAt(ii).ElementAt(17 + m_nAdd).Find(m_filter) != -1 ||
							m_List1array.ElementAt(ii).ElementAt(18 + m_nAdd).Find(m_filter) != -1)
						{
							m_FurtherList.m_arLabels.ElementAt(count++).Copy(m_List1array.ElementAt(ii));
						}
					}
				}
				else if (type == 2)//拼音
				{
					m_filter.MakeUpper();
					for (ii = 0; ii < m_FurtherList.m_arLabels.GetSize(); ii++)
					{
						// 查询条件==拼音1||拼音2
						if (m_List1array.ElementAt(ii).ElementAt(19 + m_nAdd).Find(m_filter) != -1 ||
							m_List1array.ElementAt(ii).ElementAt(20 + m_nAdd).Find(m_filter) != -1)
						{
							m_FurtherList.m_arLabels.ElementAt(count++).Copy(m_List1array.ElementAt(ii));
						}
					}
				}
				else
				{
					for (ii = 0; ii < m_FurtherList.m_arLabels.GetSize(); ii++)
					{
						if (m_List1array.ElementAt(ii).ElementAt(0).Find(m_filter) != -1 || \
							m_List1array.ElementAt(ii).ElementAt(1).Find(m_filter) != -1 || \
							m_List1array.ElementAt(ii).ElementAt(2).Find(m_filter) != -1 || \
							m_List1array.ElementAt(ii).ElementAt(3).Find(m_filter) != -1 || \
							m_List1array.ElementAt(ii).ElementAt(12).Find(m_filter) != -1 || \
							m_List1array.ElementAt(ii).ElementAt(13).Find(m_filter) != -1 || \
							m_List1array.ElementAt(ii).ElementAt(14).Find(m_filter) != -1 || \
							m_List1array.ElementAt(ii).ElementAt(15).Find(m_filter) != -1 || \
							m_List1array.ElementAt(ii).ElementAt(16).Find(m_filter) != -1 || \
							m_List1array.ElementAt(ii).ElementAt(17).Find(m_filter) != -1 || \
							m_List1array.ElementAt(ii).ElementAt(18).Find(m_filter) != -1 || \
							m_List1array.ElementAt(ii).ElementAt(20).Find(m_filter) != -1)
						{
							m_FurtherList.m_arLabels.ElementAt(count++).Copy(m_List1array.ElementAt(ii));
						}
					}
				}
			}
		}
		m_FurtherList.m_arLabels.SetSize(count, 1);
		ii = count;
		m_FurtherList.m_LabelCount = ii;
		m_FurtherList.SetItemCountEx(ii);
		CString str;
		str.Format("单数:%d", ii);
		SetDlgItemText(IDC_STATIC2, str);
	}

	if (!g_id.IsEmpty())
	{
		for (int i = 0; i < m_FurtherList.GetItemCount(); i++)
		{
			if (g_id == m_FurtherList.GetItemText(i, 0 + m_nAdd))
			{
				m_FurtherList.SetItemState(i, LVIS_SELECTED | LVIS_FOCUSED, LVIS_SELECTED | LVIS_FOCUSED);
				m_FurtherList.EnsureVisible(i, FALSE);
				break;
			}
		}
	}
}

void BeautifySkinFrom2::OnBUTclose()
{
	GetParent()->SendMessage(WM_CLOSE);
}

void BeautifySkinFrom2::OnSelchangeCombo1()
{
	SetTimer(1, 100, NULL);
}

void BeautifySkinFrom2::OnTimer(UINT nIDEvent)
{
	KillTimer(nIDEvent);
	OnButton1();
}

BOOL BeautifySkinFrom2::PreTranslateMessage(MSG* pMsg)
{
	try
	{
		if (pMsg->message == WM_KEYDOWN)
		{
			switch (pMsg->wParam)
			{
			case VK_RETURN:
				OnButton1();
				return 1;
			case 0x43: // copy
				if ((GetKeyState(VK_CONTROL) & 0x80))
				{
					GetFocus()->SendMessage(WM_COPY);
					return TRUE;
				}
				break;
			case 0x56: //Ctrl + V:
				if ((GetKeyState(VK_CONTROL) & 0x80))
				{
					GetFocus()->SendMessage(WM_PASTE);
					return TRUE;
				}
				break;
			case 0x58: // cut
				if ((GetKeyState(VK_CONTROL) & 0x80))
				{
					GetFocus()->SendMessage(WM_CUT);
					return TRUE;
				}
				break;
			case 0x5A: //undo
			case 0x59: //redo
				if ((GetKeyState(VK_CONTROL) & 0x80))
				{
					GetFocus()->SendMessage(WM_UNDO);
					return TRUE;
				}
				break;
			}
		}
		return MyFormView::PreTranslateMessage(pMsg);
	}
	catch (...)
	{
	}

	return true;
}

void BeautifySkinFrom2::OnBUTimportphoto()	// 导入精修片 按钮;
{
#ifdef USE_KERNEL_DLL
	POSITION pos = m_FurtherList.GetFirstSelectedItemPosition();
	if ( pos == NULL )
	{
		AfxMessageBox(_T("请选中您要导入精修片的订单！"),MB_ICONINFORMATION);
		return;
	}

	INT nItemCount = m_FurtherList.GetItemCount();
	INT nSelectedItem = m_FurtherList.GetNextSelectedItem(pos);

	// 获取列表信息:域名、订单号、顾客信息、景点名(成长套系名)、精修人、精修状态、精修日期;
	CString strBranchName = _T("");
	CString strBranchId = _T("");
	CString strOrderNum = _T("");
	CString strScenery = _T("");
	CString strCustomerInfo = _T("");
	CString strJingxiuRen = _T("");
	CString strJingxiuState = _T("");
	CString strJingxiuDate = _T("");

	// 获取域名;
	if ( g_bAllBranch )
	{// 多店汇总时;
		strBranchName = m_FurtherList.GetItemText(nSelectedItem, 0);
		strBranchId = GetDomainFromBranch( strBranchName );
	}
	else
	{
		if ( g_branchname.IsEmpty() )
		{// 连接本店时;
			strBranchId = g_domain;
		}
		else
		{// 连接分店时;
			strBranchName = g_branchname;
			strBranchId = GetDomainFromBranch( g_branchname );
		}
	}

	// 获取订单号;
	strOrderNum = m_FurtherList.GetItemText(nSelectedItem, 0 + m_nAdd);
	// 获取精修师;
	strJingxiuRen = m_FurtherList.GetItemText(nSelectedItem, 13 + m_nAdd); // 11
	// 获取精修状态;
	strJingxiuState = m_FurtherList.GetItemText(nSelectedItem, 6 + m_nAdd);
	// 获取精修日期;
	strJingxiuDate = m_FurtherList.GetItemText(nSelectedItem, 7 + m_nAdd);
	// 获取顾客信息;
	strCustomerInfo = m_FurtherList.GetItemText(nSelectedItem, 1 + m_nAdd) + _T(",") + m_FurtherList.GetItemText(nSelectedItem, 2 + m_nAdd);

	CDlgChuXiuInfo xpdlg;
	xpdlg.m_strOrderNumber = strOrderNum;
	xpdlg.m_strXiupianRen = strJingxiuRen;
	if ( strJingxiuState == _T("OK") )
		xpdlg.m_nXiupianStatus = 0;
	else if ( strJingxiuState == _T("修片中"))
		xpdlg.m_nXiupianStatus = 1;
	else if ( strJingxiuState == _T("未修"))
		xpdlg.m_nXiupianStatus = 2;

	CString strSQL = _T("");
	if ( xpdlg.DoModal() == IDOK )
	{
		if ( xpdlg.m_bGrowthTx )
			strScenery = xpdlg.m_strScenery;

		if ( xpdlg.m_nXiupianStatus == 0 )
			strJingxiuState = _T("OK");
		else if ( xpdlg.m_nXiupianStatus == 1)
			strJingxiuState = _T("修片中");
		else if ( xpdlg.m_nXiupianStatus == 2 )
			strJingxiuState = _T("未修");

		strJingxiuRen = xpdlg.m_strXiupianRen;

		if (strJingxiuDate.IsEmpty())
			strSQL.Format(_T("update dindan set waiter7 = '%s', status6 = '%s', time9 = '%s' where id = '%s' "), strJingxiuRen, strJingxiuState, g_date, strOrderNum);
		else
			strSQL.Format(_T("update dindan set waiter7 = '%s', status6 = '%s' where id = '%s'"), strJingxiuRen, strJingxiuState, strOrderNum);

		// 构建更新包，发送到服务端更新数据;
		g_sendhead.bsql = TRUE;
		if ( g_bAllBranch )
		{ // 多店汇总时;
			g_branchip = GetBranchIPbyId(strBranchId);
			g_pMainWnd->OnDisconnect();
			g_branchname = strBranchName;
			g_bBranchModify = TRUE;
			g_pMainWnd->ProcessChatMessageRequest2(strSQL);
			g_pMainWnd->OnDisconnect(); 
			g_bBranchModify = FALSE; 
			g_branchip = g_branchname = "";
		}
		else
		{// 连接本店或分店时;
			g_pMainWnd->ProcessChatMessageRequest2(strSQL);
		}

		/////////////////////////////////////////////////////////////////////////////////////////////////
		// 接收服务器返回的数据,并刷新界面;
		if (g_bSendOK == 0) 
		{
			OutputDebugString(_T("接收服务信息失败\n"));
			return;
		}

		if ( g_bAllBranch == 0)
		{// 连接本店或分店时;
			GetData();
		}
		else
		{// 多店汇总时;
			for (int i = 0; i < m_List1array.GetSize(); i++)
			{
				if ( strOrderNum == m_List1array.ElementAt(i).ElementAt(1) && strBranchName == m_List1array.ElementAt(i).ElementAt(0))
				{
					m_List1array.ElementAt(i).SetAt(6 + m_nAdd, strJingxiuState);
					if ( strJingxiuDate.IsEmpty() )
						m_List1array.ElementAt(i).SetAt(7 + m_nAdd, g_date);

					m_List1array.ElementAt(i).SetAt(13 + m_nAdd, strJingxiuRen);
					FillGrid();
					break;
				}
			}
		}
	}
	else
	{
		// 开始导入初修片;
		if ( MessageBox(_T("是否现在开始导入精修片！"), _T("导片提示：导入精修片"), MB_TOPMOST|MB_YESNO|MB_ICONWARNING ) !=  IDYES )
		{// 是否马上导入相片;
			return;
		}

		if ( xpdlg.m_bGrowthTx )
			strScenery = xpdlg.m_strScenery;

		if ( xpdlg.m_bGrowthTx && strScenery.IsEmpty() )
		{
			AfxMessageBox(_T("儿童成长套系导片必须选择套系名！"));
			return;
		}
	}

	/////////////////////////////////////////////////////////////////////////////////////////////////
	if ( g_pIMGProcess == NULL )
	{
		return;
	}
	ImgImportInterface *pImport = NULL;
	g_pIMGProcess->QueryInterface(IID_ImgImportInterface, (void**)&pImport);
	if ( pImport )
	{
		pImport->ImportFurtherImg(
			FALSE,																// 文件夹形式打开源或多选文件形式;
			strBranchId,														// 分店域名;
			strOrderNum,														// 订单号;
			strCustomerInfo,													// 顾客信息,可任意组合;
			!strScenery.IsEmpty(),												// 导入时,是否生成景点名文件夹;	
			strScenery,															// 导入时,景点名;
			_T("*.jpg|*.jpeg"),													// 导入时,主扩展名相片;
			INVALID_COPY_PIX,													// 导入时,主扩展名相片的压缩像素;
			_T("*.nef|*.cr2"),													// 导入时,附加的扩展名相片;
			TRUE,																// 导入时,是否生成缩略图;
			SET_PIX(100,100),													// 导入时,生成的缩略图像素大小;
			FALSE																// 导入时,文件存在时是否覆盖;
			);
		g_pIMGProcess->Release();
	}
	// 结束;
#else
	POSITION pos;
	pos = m_FurtherList.GetFirstSelectedItemPosition();
	if (pos == NULL)
	{
		AfxMessageBox("请先选中您要导片的定单!", MB_ICONINFORMATION);
		return;
	}
	int iItem = m_FurtherList.GetNextSelectedItem(pos);
	CString branch;
	CString id = m_FurtherList.GetItemText(iItem, 0 + m_nAdd);
	if (g_bAllBranch)
		branch = m_FurtherList.GetItemText(iItem, 0);

	CString oldstatus = m_FurtherList.GetItemText(iItem, 6 + m_nAdd);
	CString time9 = m_FurtherList.GetItemText(iItem, 7 + m_nAdd);

	CString name = m_FurtherList.GetItemText(iItem, 1 + m_nAdd) + "," + m_FurtherList.GetItemText(iItem, 2 + m_nAdd);
	name.TrimLeft(",");
	name.TrimRight(",");
	name = "客人:" + name;
	CString phone = m_FurtherList.GetItemText(iItem, 15 + m_nAdd) + "," + m_FurtherList.GetItemText(iItem, 16 + m_nAdd);
	phone.TrimLeft(",");
	phone.TrimRight(",");
	phone = "电话:" + phone;

	CString strDomain = _T("");
	CString savepath = _T("");
	if (g_bAllBranch)
			strDomain = GetDomainFromBranch(branch);
	else
	{
		if(g_branchname != _T(""))
			strDomain = GetDomainFromBranch(g_branchname);
	}

	//////////////////////////////////////////////////////////////////////////
	// 获取可用的共享目录;
#if USE_SHARE_FLORD // 2015.04.13
	TCHAR szSharePath[MAX_PATH];
	//if( GetEnableShareDirectory(3,id,branch,szSharePath) )
	if (CNetShareInfo::GetInstance()->GetEnableShareDirectory(3, id, strDomain, szSharePath))
	{
		savepath.Format("%s\\",szSharePath);
	}
	else
	{
		AfxMessageBox(_T("没有可用的共享目录!"));
		return;
	}
#else
	savepath += id + "\\";
#endif
	//////////////////////////////////////////////////////////////////////////

	if (::CheckFolderFileExist(savepath) == 0)
	{
		if ( !CreateDirectory(savepath, NULL) )
		{
			DWORD dwError = GetLastError();
			AfxMessageBox(_T("创建精修订单目录失败"));
			return;	
		}
	}

	CString srcdir; CString str;
	GetSavePath(srcdir);

	if (srcdir.IsEmpty())
	{
		CString status6;
		if (AfxMessageBox("客照是否全部精修完毕?", MB_YESNO | MB_ICONINFORMATION) == IDYES)
			status6 = "OK";
		else
			status6 = "修片中";
		CString sql;

		if (time9.IsEmpty())
			sql = "update dindan set status6='" + status6 + "',time9='" + g_date + "' where id='" + id + "'";
		else
			sql = "update dindan set status6='" + status6 + "' where id='" + id + "'";

		g_sendhead.bsql = 1;
		if (g_bAllBranch)
		{
			g_branchip = GetIP(branch);
			g_pMainWnd->OnDisconnect();
			g_branchname = branch;
			g_bBranchModify = 1;
			g_pMainWnd->ProcessChatMessageRequest2(sql);
			g_pMainWnd->OnDisconnect(); 
			g_bBranchModify = 0; 
			g_branchip = g_branchname = "";
		}
		else
			g_pMainWnd->ProcessChatMessageRequest2(sql);
		if (g_bSendOK == 0)return;
		if (g_bAllBranch == 0)
		{
			GetData();
		}
		else
		{
			for (int i = 0; i < m_List1array.GetSize(); i++)
			{
				if (id == m_List1array.ElementAt(i).ElementAt(1) && branch == m_List1array.ElementAt(i).ElementAt(0))
				{
					m_List1array.ElementAt(i).SetAt(6 + m_nAdd, status6);
					if (time9.IsEmpty())
						m_List1array.ElementAt(i).SetAt(7 + m_nAdd, g_date);
					FillGrid();
					break;
				}
			}
		}
		return;
	}
	if (srcdir.GetLength() < 4)
	{
		AfxMessageBox("请选择正确的您文件所在的目录!", MB_ICONSTOP);
		return;
	}

	if (oldstatus != "未修")
	{
		str.Format("%s\r\n%s\r\n此单已导入过修片,确认您选中的照片没有导入过吗? 否则会覆盖原来的照片, 是否继续?", name, phone);
		if (AfxMessageBox(str, MB_YESNO | MB_ICONSTOP) != IDYES)
			return;
	}
	else
	{
		str.Format("%s\r\n%s\r\n确认您选中的照片与客户资料相符吗? 是否继续?", name, phone);
		if (AfxMessageBox(str, MB_YESNO | MB_ICONINFORMATION) != IDYES)
			return;
	}

	CStringArray array;
	CStringArray desarray;
	CStringArray dirarray;

	if (1)
	{
		// 1.获取源目录下的所有文件,包含子目录;
		using namespace helper_coffs;
		ffsco o;
		o.dirs(1);
		o.find(LPCSTR(srcdir), LPCSTR("*.*"));
		ffsco::typeT coo;
		ffsco::typeT::iterator it;
		coo = o.co_dir();
		for (it = coo.begin(); coo.end() != it; it++)
		{
			str = (*it).c_str();
			if (FindArray(&dirarray, str) == -1)
			{
				dirarray.Add(str);
				if (str != dirarray.ElementAt(0))
				{
					str = savepath + str.Right(str.GetLength() - dirarray.ElementAt(0).GetLength());
					if (::CheckFolderFileExist(str) == 0)
						::CreateDirectory(str, NULL);
				}
			}
		}
	}
	if (1)
	{
		// 2.从每个子目录下查找所有的相片;
		for (int i = 0; i < dirarray.GetSize(); i++)
		{
			using namespace helper_coffs;
			ffsco o;
			o.dirs(0);
			o.find(LPCSTR(dirarray.ElementAt(i)), LPCSTR("*.jpg"));
			ffsco::typeT coo;
			ffsco::typeT::iterator it;
			coo = o.co_file();
			for (it = coo.begin();coo.end() != it;it++)
			{
				str = (*it).c_str();
				array.Add(str);
				desarray.Add(savepath + dirarray.ElementAt(i).Right(dirarray.ElementAt(i).GetLength() - dirarray.ElementAt(0).GetLength()) + str.Right(str.GetLength() - str.ReverseFind('\\') - 1));
			}
		}
	}

	if (array.GetSize() == 0)return;

	ImportPhoto dlg;
#if USE_SHARE_FLORD
	dlg.m_id = id;	// add by 2015-07-06 Jeff;
#endif
	dlg.m_branch = branch;
	dlg.m_nphototype = 2;
	dlg.m_bOverWrite = 1;
	dlg.m_pArray = &array;
	dlg.m_pDesArray = &desarray;
	dlg.m_savepath = savepath;
#ifdef ENTERPRISE_VERSION
	//	if(!g_branchname.IsEmpty ())
	{
		dlg.m_bSaveUploadTask = g_bSaveUploadTask3;
		dlg.m_sel = g_cominfoarraylocal.ElementAt(0).ElementAt(80);
		dlg.m_uploadtaskarray.Add(id + ";" + name);
		dlg.m_uploadtaskarray.Add("");
		dlg.m_uploadtaskarray.Add("");
		dlg.m_uploadtaskarray.Add("");
		dlg.m_uploadtaskarray.Add("");
		dlg.m_uploadtaskarray.Add("");
		dlg.m_uploadtaskarray.Add("");
		dlg.m_uploadtaskarray.Add("");
		dlg.m_uploadtaskarray.Add("");
		dlg.m_uploadtaskarray.Add("");
	}
#endif
	dlg.DoModal();

	CString status6;
	if (AfxMessageBox("客照是否全部精修完毕?", MB_YESNO | MB_ICONINFORMATION) == IDYES)
		status6 = "OK";
	else
		status6 = "修片中";


	CString sql;

	if (time9.IsEmpty())
		sql = "update dindan set status6='" + status6 + "',waiter7='" + g_user.name + "',time9='" + g_date + "' where id='" + id + "'";
	else
		sql = "update dindan set status6='" + status6 + "',waiter7='" + g_user.name + "' where id='" + id + "'";

	g_sendhead.bsql = 1;
	if (g_bAllBranch)
	{
		g_branchip = GetIP(branch);
		g_pMainWnd->OnDisconnect();
		g_branchname = branch;
		g_bBranchModify = 1;
		g_pMainWnd->ProcessChatMessageRequest2(sql);
		g_pMainWnd->OnDisconnect(); 
		g_bBranchModify = 0; 
		g_branchip = g_branchname = "";
	}
	else
		g_pMainWnd->ProcessChatMessageRequest2(sql);
	if (g_bSendOK == 0)return;
	savepath += "ok";
	::DeleteFile(savepath);			// 删除ok文件;

	AfxMessageBox("导入客照成功!", MB_ICONINFORMATION);
	if (g_bAllBranch == 0)
	{
		GetData();
	}
	else
	{
		for (int i = 0; i < m_List1array.GetSize(); i++)
		{
			if (id == m_List1array.ElementAt(i).ElementAt(1) && branch == m_List1array.ElementAt(i).ElementAt(0))
			{
				m_List1array.ElementAt(i).SetAt(6 + m_nAdd, status6);
				if (time9.IsEmpty())
					m_List1array.ElementAt(i).SetAt(7 + m_nAdd, g_date);
				m_List1array.ElementAt(i).SetAt(11 + m_nAdd, g_user.name);
				FillGrid();
				break;
			}
		}
	}
#endif
}

void BeautifySkinFrom2::OnBUTshowphoto()
{
	POSITION pos;
	pos = m_FurtherList.GetFirstSelectedItemPosition();
	if (pos == NULL)
	{
		AfxMessageBox("请先选中您要查看的定单!", MB_ICONINFORMATION);
		return;
	}
	int iItem = m_FurtherList.GetNextSelectedItem(pos);
	CString branch;
	CString id = m_FurtherList.GetItemText(iItem, 0 + m_nAdd);
	if (g_bAllBranch)
		branch = m_FurtherList.GetItemText(iItem, 0);

	CString name = m_FurtherList.GetItemText(iItem, 1 + m_nAdd) + "," + m_FurtherList.GetItemText(iItem, 2 + m_nAdd);
	name.TrimLeft(",");
	name.TrimRight(",");
	name = "客人:" + name;

	ShowPic dlg;
	dlg.m_id = id;
	dlg.m_name = name;
	dlg.m_mode = 3;

	if(g_branchname == _T(""))
		dlg.m_path = g_path1 + "\\";
	else
	{
		dlg.m_branch = GetDomainFromBranch(g_branchname);
		CString branchpath = GetBranchPhotoPath(g_branchname);
		dlg.m_path = g_path1 + branchpath + "\\";
	}

#ifndef USE_KERNEL_DLL
#if USE_SHARE_FLORD
	// 根据域名,相片类型,订单号查找相片;
	dlg.m_aryOfShareDirectory.RemoveAll();
	CNetShareInfo::GetInstance()->LoadOrderImages(dlg.m_mode, dlg.m_id, g_domain, dlg.m_patharray1, &dlg.m_aryOfShareDirectory);
#endif
#endif
	dlg.m_path += id;
	dlg.m_path += "\\";
	dlg.DoModal();
}

//-----------------------------------------------------------------
// remark by Jeff 2014-12-12
// 函数：GetNo
// 描述：从str中解析出每个相片名,然后存入空的CStringArray中;
// 参数：
//		str:选好的相片名串,如："001,002,003" 后分隔符改为"|",结果应是"001|002|003"
//		array:空的数组,用来存放解析后的相片名;
// 返回：
// 注意：更换分隔符造成的问题,在该函数已解决;
//-----------------------------------------------------------------
void BeautifySkinFrom2::GetNo(CString str, CStringArray &array)
{
	if (!str.IsEmpty())
	{
#ifdef USE_SEP_VEB
		int pos = str.Find(SEPS_VEB);
#else
		int pos = str.Find(",");
#endif
		while (pos != -1)
		{
			if (FindArray(&array, str.Left(pos)) == -1)
				array.Add(str.Left(pos));
			str = str.Right(str.GetLength() - pos - 1);
#ifdef USE_SEP_VEB
			pos = str.Find(SEPS_VEB);
#else
			pos = str.Find(",");
#endif
		}
		if (FindArray(&array, str) == -1)
			array.Add(str);
	}
}

//-----------------------------------------------------------------
// remark by Jeff 2014-12-12
// 函数：GetSelName
// 描述：
// 参数：
//		name:由GetNo解析出来后的单个相片名,如："001"
//		spnamearray:订单下的商品数组,case 50所得;
// 返回：
// 注意：更换分隔符造成的问题,在该函数已解决;
//-----------------------------------------------------------------
CString BeautifySkinFrom2::GetSelName(CString name, CArray<CStringArray, CStringArray>&spnamearray)
{
	CString ret;
#ifdef USE_SEP_VEB
	name = SEPS_VEB + name + SEPS_VEB;
#else
	name = "," + name + ",";
#endif
	CString str;
	for (int i = 0; i < spnamearray.GetSize(); i++)
	{
#ifdef USE_SEP_VEB
		str = SEPS_VEB + spnamearray.ElementAt(i).ElementAt(6) + SEPS_VEB;
#else
		str = "," + spnamearray.ElementAt(i).ElementAt(6) + ",";
#endif
		if (str.Find(name) != -1)
		{
			ret += spnamearray.ElementAt(i).ElementAt(5);
			ret += ";";
		}
	}
	ret.TrimRight(";");
	ret.Replace("*", "x");
	return ret;
}

CString GetPathFromNo2(CString dir, CString no)
{
	CString sRet;
	dir.TrimRight('\\');
	dir += "\\";
	CStringArray dirarray;
	CString temp;
	using namespace helper_coffs;
	ffsco o;
	o.dirs(1);
	o.find(LPCSTR(dir), LPCSTR("*.*"));
	ffsco::typeT coo;
	ffsco::typeT::iterator it;
	coo = o.co_dir();
	for (it = coo.begin();coo.end() != it;it++)
	{
		temp = (*it).c_str();
		if (::FindArray(&dirarray, temp) == -1 && temp != dir)
		{
			dirarray.Add(temp);
		}
	}
	for (int i = 0; i < dirarray.GetSize(); i++)
	{
		temp = dirarray.ElementAt(i);
		sRet.Format("%s%s.jpg", temp, no);
		if (::PathFileExists(sRet))return sRet;
		sRet.Replace(".jpg", ".raw");
		if (::PathFileExists(sRet))return sRet;
		sRet.Replace(".raw", ".nef");
		if (::PathFileExists(sRet))return sRet;
		sRet.Replace(".nef", ".cr2");
		if (::PathFileExists(sRet))return sRet;
		sRet.Replace(".cr2", ".jpg");
		if (::PathFileExists(sRet))return sRet;
	}
	return dir + no + ".jpg";
}

CString GetPathFromNo3(CString dir, CString no)
{
	CString sRet;
	dir.TrimRight('\\');
	dir += "\\";
	CStringArray dirarray;
	CString temp;
	using namespace helper_coffs;
	ffsco o;
	o.dirs(1);
	o.find(LPCSTR(dir), LPCSTR("*.*"));
	ffsco::typeT coo;
	ffsco::typeT::iterator it;
	coo = o.co_dir();
	for (it = coo.begin();coo.end() != it;it++)
	{
		temp = (*it).c_str();
		if (::FindArray(&dirarray, temp) == -1 && temp != dir)
		{
			dirarray.Add(temp);
		}
	}
	for (int i = 0; i < dirarray.GetSize(); i++)
	{
		temp = dirarray.ElementAt(i);
		sRet.Format("%s%s.jpg", temp, no);
		if (::PathFileExists(sRet))return sRet;
	}
	return dir + no + ".jpg";
}

// 导出裁剪后的效果图;
void BeautifySkinFrom2::OnBUTexportphoto() // 导出选好的片 按钮;
{
#ifdef USE_KERNEL_DLL
	// 判断用户是否有权限导出选好的片;
	if ( !IsHasRights2new(10) )
	{
		AfxMessageBox(_T("您没有权限导出选好的片！"));
		return;
	}

	// 获取列表信息;
	POSITION pos = m_FurtherList.GetFirstSelectedItemPosition();
	if ( pos == NULL )
	{
		AfxMessageBox(__T("请选中您要导片的订单！"));
		return;
	}

	INT nItemCount = m_FurtherList.GetItemCount();
	INT nSelectedItem = m_FurtherList.GetNextSelectedItem(pos);

	// 获取域名、订单号、景点名、顾客信息、选片人、选片状态、选片日期；
	CString strBranchName = _T("");
	CString strBranchId = _T("");
	CString strOrderNum = _T("");
	CString strScenery = _T("");
	CString strCustomerInfo = _T("");
	CString strXuanpianRen = _T("");
	CString strXuanpianState = _T("");
	CString strXuanpianDate = _T("");

	// 获取订单号;
	strOrderNum = m_FurtherList.GetItemText(nSelectedItem, 0 + m_nAdd); 
	// 获取顾客信息;
	strCustomerInfo = m_FurtherList.GetItemText(nSelectedItem, 1 + m_nAdd) + _T(",") + m_FurtherList.GetItemText(nSelectedItem, 2 + m_nAdd);
	// 获取选片状态;
	strXuanpianState = m_FurtherList.GetItemText(nSelectedItem, 4 + m_nAdd);
	// 获取选片日期;
	strXuanpianRen = m_FurtherList.GetItemText(nSelectedItem, 5 + m_nAdd);

	if ( strXuanpianState == _T("未选") )
	{
		MessageBox(_T("此单未选片!"), _T("影楼管理"), MB_OK | MB_TOPMOST | MB_ICONINFORMATION );
		return;
	}

	// 获取域名;
	if ( g_bAllBranch )
	{// 多店汇总;
		strBranchName = m_FurtherList.GetItemText(nSelectedItem, 0);
		strBranchId = GetDomainFromBranch(strBranchName);
	}
	else
	{
		if ( g_branchname.IsEmpty() )
		{// 连接本店时;
			strBranchId = g_domain;
		}
		else
		{//连接分店时;
			strBranchName = g_branchname;
			strBranchId = GetDomainFromBranch( g_branchname );
		}
	}

	// 获取景点名,需要读取dindanjd表获取，目前只支持儿童成长套系订单;
	IsGrowthTx IsGrowthtxdlg;
	IsGrowthtxdlg.m_mode = 1;
	IsGrowthtxdlg.m_strOrderNumber = strOrderNum;
	IsGrowthtxdlg.DoModal();
	if( IsGrowthtxdlg.m_bReturnOK == 0 || (IsGrowthtxdlg.m_bGrowthTx && IsGrowthtxdlg.m_seltxname.IsEmpty()) )
	{
		return;
	}

	if ( IsGrowthtxdlg.m_bGrowthTx )
	{
		// 读取dindanjd表里的成长套系名,并返回选中的成长套系名;
		strScenery = IsGrowthtxdlg.m_seltxname;
		if ( strScenery == _T("全部") )
		{
			strScenery.Empty();
		}
	}

	/////////////////////////////////////////////////////////////////////////////////////////////////
	// 与服务器通信获取指定条件的订单商品信息;
	CString strSQL = _T("");
#ifdef CHILD_VERSION
	if ( IsGrowthtxdlg.m_bGrowthTx && !strScenery.IsEmpty() )
		strSQL.Format(_T("id='%s' and growthtxname = '%s'; id='%s'; id='%s' and name <> '入册' and name <> '入底'"), strOrderNum, strScenery, strOrderNum, strOrderNum);
	else
		strSQL.Format(_T("id='%s'; id='%s'; id='%s' and name <> '入册' and name <> '入底'"), strOrderNum, strOrderNum, strOrderNum);
#else
	strSQL.Format(_T("id='%s'; id='%s'; id='%s' and kind <> '2' and name <> '入册' and name <> '入底'"), strOrderNum, strOrderNum, strOrderNum);
#endif//CHILD_VERSION

	g_sendhead.bsql = FALSE;
	g_sendhead.code[0] = 50;	// dindansp;
	g_sendhead.code[1] = 11;	// dindan;
	g_sendhead.code[2] = 56;	// dindansp;
	g_sendhead.tabcount = 3;

	if( g_bAllBranch )
	{//多店汇总时;
		g_branchip = GetBranchIPbyId(strBranchId);
		g_pMainWnd->OnDisconnect();

		g_branchname = strBranchName;
		g_bBranchModify = TRUE;

		g_pMainWnd->ProcessChatMessageRequest2(strSQL);
		g_pMainWnd->OnDisconnect();

		g_bBranchModify = FALSE;
		g_branchip = g_branchname = _T("");
	}
	else
	{// 连接本店或分店时;
		g_pMainWnd->ProcessChatMessageRequest2(strSQL);
	}

	if( !g_bSendOK )
		return ;

	CArray<CStringArray, CStringArray> Arydindan;
	CArray<CStringArray, CStringArray> Arydindansp;
	CArray<CStringArray, CStringArray> Arydindansp2;
	DataToArray( &Arydindansp, &Arydindan, &Arydindansp2 );	

	CString strTemp = _T("");
	CStringArray AryImgNums;
	CStringArray AryPerImgGoods;	

	// 获取所有dindansp记录no字段中的相片编号;
	int i = 0;
	int nSize = Arydindansp.GetSize();
	for ( i = 0; i < nSize; i++)
	{
		strTemp = Arydindansp.ElementAt(i).ElementAt(6);	// dindansp表中的no字段;
		GetNo(strTemp, AryImgNums);
	}

	// 获取每张相片编号对应的商品,每个商品间用分号隔开;
	nSize = AryImgNums.GetSize();
	AryPerImgGoods.SetSize(nSize);
	for ( i = 0; i < nSize; i++ )
	{
		strTemp = AryImgNums.ElementAt(i);
		AryPerImgGoods.SetAt(i, GetSelName(strTemp, Arydindansp));
	}

	// 由于VC6.0传CStringArray给VC9.0DLL 时,会产生无法避免的兼容性问题,故使用CString传;
	CString strImgNums = _T("");
	for ( i = 0; i < AryImgNums.GetSize(); i++ )
	{
		strImgNums += AryImgNums.ElementAt(i);
		strImgNums += _T("?|?");
	}

	CString strPerImgGoods = _T("");
	for ( i = 0; i < AryPerImgGoods.GetSize(); i++ )
	{// 商品名称,应该禁止包含非法字符;
		strPerImgGoods += AryPerImgGoods.ElementAt(i);
		strPerImgGoods += _T("?|?");
	}

	// 再选择导出的是初修片、原片、初修+原片，并且是否按产品生成文件夹分类相片或者相片名后带产品名;
	SelectPhotoDlg selectdlg;
	selectdlg.DoModal();
	BOOL bExportWithName = selectdlg.m_check1;
	INT  bExportMode = selectdlg.m_mode; 	// 0 原片+初修, 1 原片, 2 初修;

	// 保存导出相片的路径;
	CString strSaveDirectory = _T("");

	if ( g_pIMGProcess == NULL )
	{
		return ;
	}
	ImgExportInterface *pExport = NULL;
	g_pIMGProcess->QueryInterface(IID_ImgExportInterface, (void**)&pExport);
	if ( pExport )
	{// 导出选好的片;
		HGLOBAL hMemery = pExport->ExportSelectedBeautifyImg(
			strBranchId,
			strOrderNum,
			strCustomerInfo,
			!strScenery.IsEmpty(),
			strScenery,
			_T("*.jpg|*.jpeg"),
			INVALID_COPY_PIX,
			_T("*.nef|*.cr2|*.raw|"),
			FALSE,
			bExportWithName,
			IsGrowthtxdlg.m_bGrowthTx,
			bExportMode,
			strImgNums,
			strPerImgGoods,
			Arydindan.ElementAt(0).ElementAt(60)
			);

		if ( hMemery )
		{
			CString strDir = _T("");
			TCHAR* pszSaveDirectory = (TCHAR*)GlobalLock(hMemery);
			GlobalUnlock(hMemery);

			// 输出输出要求内容;
			strDir.Format(_T("%s\\客户要求.txt"), pszSaveDirectory);
			if ( Arydindan.GetSize() )
			{
				CStdioFile fp;
				fp.Open(strDir, CFile::modeCreate | CFile::modeWrite);
				fp.WriteString(_T("选片要求:\n"));
				fp.WriteString(Arydindan.ElementAt(0).ElementAt(39) + _T(" ") + Arydindan.ElementAt(0).ElementAt(75));

				fp.WriteString(_T("\n"));
				fp.WriteString(_T("\n"));
				fp.WriteString(_T("订单要求:\n"));
				fp.WriteString(Arydindan.ElementAt(0).ElementAt(38));
				fp.WriteString(_T("\n"));
				fp.WriteString(_T("\n"));
				fp.WriteString(_T("客人产品:\n"));

				CString str;
				str = _T("产品名称");
				FillLength(str, 30);
				str += _T("数量");
				FillLength(str, 40);
#ifdef LKAY_VERSION
				str += _T("P数");
				FillLength(str, 50);
				str += _T("加急");
				FillLength(str, 60);
				str += _T("取件日期");
				FillLength(str, 70);
#else
				str += _T("加急");
				FillLength(str, 50);
				str += _T("取件日期");
				FillLength(str, 60);
#endif

				fp.WriteString(str);

				fp.WriteString(_T("\n"));
				for (int i = 0; i < Arydindansp2.GetSize(); i++)
				{
					str.Empty();
					str = Arydindansp2.ElementAt(i).ElementAt(0);
					FillLength(str, 30);
					str += Arydindansp2.ElementAt(i).ElementAt(1);
					FillLength(str, 40);
#ifdef LKAY_VERSION
					str += Arydindansp2.ElementAt(i).ElementAt(29); //p数
					FillLength(str, 50);

					str += Arydindansp2.ElementAt(i).ElementAt(18);
					FillLength(str, 60);
					str += Arydindansp2.ElementAt(i).ElementAt(19);
					FillLength(str, 70);
#else
					str += Arydindansp2.ElementAt(i).ElementAt(18);
					FillLength(str, 50);
					str += Arydindansp2.ElementAt(i).ElementAt(19);
					FillLength(str, 60);
#endif
					fp.WriteString(str);		
					fp.WriteString(_T("\n"));
				}
				fp.Close();
			}

			// 导出条形码位图;
			if ( g_bExportBarCode  )
			{
				for ( int j = Arydindansp.GetSize() - 1; j >= 0; j-- )
				{
					if ( Arydindansp.ElementAt(j).ElementAt(6).IsEmpty() )
						Arydindansp.RemoveAt(j);
				}

				if ( !bExportWithName )
				{
					for ( int i = 0; i < Arydindansp.GetSize(); i++ )
					{
						strDir.Format(_T("%s\\%s"), pszSaveDirectory, Arydindansp.ElementAt(i).ElementAt(5));
						if ( PathFileExists(strDir) )
						{
							// 商品目录存在才导出;
							pExport->ExportBarCodeImg(0, g_screenwid, g_screenhei, 1, 40, Arydindansp.ElementAt(i).ElementAt(7), Arydindansp.ElementAt(i).ElementAt(0), Arydindansp.ElementAt(i).ElementAt(5), strDir);
						}
					}
				}

				pExport->ExportOrderBarCodeImg(0, g_screenwid, g_screenhei*3, 1, 40, Arydindansp, pszSaveDirectory);
			}
		}

		OutputDebugString(_T("导出选好的片！\n"));
	}

	pExport->Release();
	// 结束;

#else
	// 1.判断权限;
	if (IsHasRights2new(10) == 0)return;

#if USE_SHARE_FLORD
	BOOL bOfmat = FALSE;
	BOOL bGrowth = FALSE;
	BOOL bExportWithName = FALSE;
	CString name1,name2,branch,strdomain,strOrderNumber,strGrowhTx = _T("");
	CStringArray array,spnamearray2;
	OUT CArray<CStringArray, CStringArray> sparray2;

	GetCurSelRecord(name1,name2,strOrderNumber,branch,strdomain);

	int nResult = GetImageWithGoods(branch,strdomain,strOrderNumber,bGrowth,strGrowhTx,bExportWithName,array,spnamearray2,sparray2);
	if ( nResult == -1 )
	{
		// 没有任务相片存在于共享目录中;
		return;
	}

	CString strSaveDiretory;
	GetSavePath(strSaveDiretory);
	if(strSaveDiretory.IsEmpty())return;
	strSaveDiretory.TrimRight ('\\');
	strSaveDiretory+="\\";
	strSaveDiretory+=strOrderNumber;
	strSaveDiretory+=g_branchname;
	if(g_bAllBranch)
	{
		if(GetBranchPhotoPath(branch)!="")
			strSaveDiretory+=branch;
	}
	strSaveDiretory+=name1;
	strSaveDiretory+=name2;
	strSaveDiretory+="选片";
	strSaveDiretory+="\\";

	if ( nResult == 3 )
	{
		// 选择导出的是初修,但初修无片,导出原片;
		strSaveDiretory.Delete(strSaveDiretory.GetLength()-1, 1);
		strSaveDiretory += _T("(未修)\\");

		bOfmat = TRUE;
	}

	::CreateDirectory (strSaveDiretory, NULL);
#else

	// 2.获取选中列的信息，如订单号;
	UpdateData();
	POSITION pos;
	pos = m_FurtherList.GetFirstSelectedItemPosition();
	if (pos == NULL)
	{
		AfxMessageBox("请先选中您要导片的定单!", MB_ICONINFORMATION);
		return;
	}

	// 2.1.获取订单的选片状态;
	int iItem = m_FurtherList.GetNextSelectedItem(pos);
	CString status2 = m_FurtherList.GetItemText(iItem, 4 + m_nAdd);
	if (status2 != "OK")
	{
		AfxMessageBox("此单未选片!", MB_ICONINFORMATION);
		return;
	}

	// 2.2.获取订单号;
	BOOL bOfmat = 0;
	CString strOrderNumber = m_FurtherList.GetItemText(iItem, 0 + m_nAdd);	// 订单号;
	CString branch;
	if (g_bAllBranch)
		branch = m_FurtherList.GetItemText(iItem, 0);

	CString name1 = m_FurtherList.GetItemText(iItem, 1 + m_nAdd);
	CString name2 = m_FurtherList.GetItemText(iItem, 2 + m_nAdd);

	// 3.1.选片成长套系对话框;
	IsGrowthTx growthtxdlg;
	growthtxdlg.m_mode = 1;
	growthtxdlg.m_strOrderNumber = strOrderNumber;
	growthtxdlg.DoModal();	// 非成长套系的，直接退出;
	BOOL m_bGrowthTX = growthtxdlg.m_bGrowthTx;
	CString m_seltxname = growthtxdlg.m_seltxname;

#ifdef CHILD_VERSION
	CString filter = "id='" + strOrderNumber + "';id='" + strOrderNumber + "';id='" + strOrderNumber + "' and name<>'入册' and name<>'入底'";
	if (m_seltxname != "" && m_seltxname != "全部")
	{
		filter = "id='" + strOrderNumber + "' and growthtxname='" + m_seltxname + "';id='" + strOrderNumber + "';id='" + strOrderNumber + "' and name<>'入册' and name<>'入底'";
	}
#else
	CString filter="id='"+strOrderNumber+"';id='"+strOrderNumber+"';id='"+strOrderNumber+"' and kind<>'2' and name<>'入册' and name<>'入底'";
#endif //#ifdef CHILD_VERSION

	g_sendhead.bsql = 0;
	g_sendhead.code[0] = 50;		// dindansp
	g_sendhead.code[1] = 11;		// dindan
	g_sendhead.code[2] = 56;		// dindansp
	g_sendhead.tabcount = 3;
	if (g_bAllBranch)
	{
		g_branchip = GetIP(branch);
		g_pMainWnd->OnDisconnect();
		g_branchname = branch;
		g_bBranchModify = 1;
		g_pMainWnd->ProcessChatMessageRequest2(filter);
		g_pMainWnd->OnDisconnect();
		g_bBranchModify = 0;
		g_branchip = g_branchname = "";
	}
	else
		g_pMainWnd->ProcessChatMessageRequest2(filter);

	if (g_bSendOK == 0)return;
	CArray<CStringArray, CStringArray>sparray;
	CArray<CStringArray, CStringArray>sparray2;
	DataToArray(&sparray, &g_List1array, &sparray2);

	CString strSrcDiretory;		// 相片源目录;
	if (g_bAllBranch)
	{
		CString branchpath = GetBranchPhotoPath(branch);
		strSrcDiretory = g_path2 + branchpath + "\\";
	}
	else
		strSrcDiretory = g_path2 + "\\";

	// 4.照片类型选择对话框;(客户原片、初修片)
	SelectPhotoDlg selectdlg;
	selectdlg.DoModal();

	strSrcDiretory += strOrderNumber;
	strSrcDiretory += "\\";
	if (m_seltxname != "" && m_seltxname != "全部")
	{
		strSrcDiretory += m_seltxname; 
		strSrcDiretory += "\\";
	}

	////////////////////////////////////////
	CString str, spname;
	CStringArray noarray;
	CStringArray spnamearray;

	for (int i = 0; i < sparray.GetSize(); i++)
	{
		str = sparray.ElementAt(i).ElementAt(6);		// 选好的片的相片名串;
		spname = sparray.ElementAt(i).ElementAt(5);		// 选好的片对应的商品名;
		GetNo(str, noarray);
	}
/*
	for(int k=0; k<noarray; k++)
		printf("no str=%s\n", noarray.ElementAt(k));
*/
	if (noarray.GetSize() == 0)
	{
		AfxMessageBox("此单未选片!", MB_ICONINFORMATION);
		return;
	}

	spnamearray.SetSize(noarray.GetSize());
	for (i = 0; i < noarray.GetSize(); i++)
	{
		str = noarray.ElementAt(i);
		spnamearray.SetAt(i, GetSelName(str, sparray));//+"-"+str );
	}

	CString strSaveDiretory;	// 导出选好片的目录;
	GetSavePath(strSaveDiretory);
	if (strSaveDiretory.IsEmpty())return;
	strSaveDiretory.TrimRight('\\');
	strSaveDiretory += "\\";
	strSaveDiretory += strOrderNumber;
	strSaveDiretory += g_branchname;
	if (g_bAllBranch)
	{
		if (GetBranchPhotoPath(branch) != "")
			strSaveDiretory += branch;
	}
	strSaveDiretory += name1;
	strSaveDiretory += name2;
	strSaveDiretory += "选片";
	strSaveDiretory += "\\";

	CStringArray array;
	CStringArray spnamearray2;
	CString src, des;

//	printf("m_mode = %d, m_seltxname = %s, m_bGrowthTX = %d, SrcDir = %s\n", selectdlg.m_mode, m_seltxname, m_bGrowthTX, strSrcDiretory);
	if (selectdlg.m_mode == 0)
	{
		for (i = 0; i < noarray.GetSize(); i++)
		{
			if ((m_seltxname != "" && m_seltxname != "全部") || m_bGrowthTX == 0)
				src.Format("%s%s.jpg", strSrcDiretory, noarray.ElementAt(i));
			else
				src = GetPathFromNo3(strSrcDiretory, noarray.ElementAt(i));

	//		printf("src1 = %s\n", src);
			if (PathFileExists(src))
			{
		//		printf("exists src = %s\n", src);
				array.Add(src);
				if (1)//selectdlg.m_check1)
					spnamearray2.Add(spnamearray.ElementAt(i));
				else
					spnamearray2.Add(noarray.ElementAt(i));
			}
			else
				AfxMessageBox("未找到初修过的文件:" + src.Right(src.GetLength() - src.ReverseFind('\\') - 1), MB_ICONINFORMATION);
		}
	}

//	printf("arraySize1 = %d\n", array.GetSize());
	if (array.GetSize() == 0)
	{
		if (selectdlg.m_mode == 0)
			AfxMessageBox("注意:此单未修片, 导出的是原片!", MB_ICONINFORMATION);
		if (g_bAllBranch)
		{
			CString branchpath = GetBranchPhotoPath(branch);
			strSrcDiretory = g_path1 + branchpath + "\\";
		}
		else
			strSrcDiretory = g_path1 + "\\";

		strSrcDiretory += strOrderNumber;
		strSrcDiretory += "\\";
		strSaveDiretory.Delete(strSaveDiretory.GetLength() - 1, 1);
		strSaveDiretory += "(未修)\\";
		bOfmat = 1;
		for (i = 0; i < noarray.GetSize(); i++)
		{
			//	src.Format ("%s%s.jpg", strSrcDiretory, noarray.ElementAt (i));
			src = GetPathFromNo2(strSrcDiretory, noarray.ElementAt(i));

	//		printf("src2 = %s\n", src);
			if (PathFileExists(src))
			{
			//	printf("exists src = %s\n", src);
				array.Add(src);
				if (1)//selectdlg.m_check1)
					spnamearray2.Add(spnamearray.ElementAt(i));
				else
					spnamearray2.Add(noarray.ElementAt(i));
			}
			else
				AfxMessageBox("未找到原片文件:" + src.Right(src.GetLength() - src.ReverseFind('\\') - 1), MB_ICONINFORMATION);
		}
	}

//	printf("arraySize2 = %d\n", array.GetSize());
	if (array.GetSize() == 0)
	{
		AfxMessageBox("此单未导入原片!", MB_ICONINFORMATION);
		return;
	}
	::CreateDirectory(strSaveDiretory, NULL);

#endif //#if USE_SHARE_FLORD

	// 3.导出相片处理对象;
	ImportPhoto dlg;
	dlg.m_name = name1 + name2;
#if USE_SHARE_FLORD
	dlg.m_bAddname = bExportWithName;
#else
	dlg.m_bAddname = selectdlg.m_check1;
#endif
	dlg.m_bOfmat = bOfmat;
	dlg.m_mode = 1;
	dlg.m_bOrigin = 1;
	dlg.m_pArray = &array;
	dlg.m_pArray2 = &spnamearray2;
	dlg.m_savepath = strSaveDiretory;
	dlg.DoModal();
	//////////////
	if (g_List1array.GetSize())
	{
		CStdioFile fp;
		fp.Open(strSaveDiretory + "客户要求.txt", CFile::modeCreate | CFile::modeWrite);
		fp.WriteString("选片要求:\n");
		fp.WriteString(g_List1array.ElementAt(0).ElementAt(39) + " " + g_List1array.ElementAt(0).ElementAt(75));

		fp.WriteString("\n");
		fp.WriteString("\n");
		fp.WriteString("订单要求:\n");
		fp.WriteString(g_List1array.ElementAt(0).ElementAt(38));
		fp.WriteString("\n");
		fp.WriteString("\n");
		fp.WriteString("客人产品:\n");

		CString str;
		str = "产品名称";
		FillLength(str, 30);
		str += "数量";
		FillLength(str, 40);
#ifdef LKAY_VERSION
		str += "P数";
		FillLength(str, 50);
		str += "加急";
		FillLength(str, 60);
		str += "取件日期";
		FillLength(str, 70);
#else
		str += "加急";
		FillLength(str, 50);
		str += "取件日期";
		FillLength(str, 60);
#endif

		fp.WriteString(str);

		fp.WriteString("\n");
		for (int i = 0; i < sparray2.GetSize(); i++)
		{
			str.Empty();
			str = sparray2.ElementAt(i).ElementAt(0);
			FillLength(str, 30);
			str += sparray2.ElementAt(i).ElementAt(1);
			FillLength(str, 40);
#ifdef LKAY_VERSION
			str += sparray2.ElementAt(i).ElementAt(29);//p数
			FillLength(str, 50);

			str += sparray2.ElementAt(i).ElementAt(18);
			FillLength(str, 60);
			str += sparray2.ElementAt(i).ElementAt(19);
			FillLength(str, 70);
#else
			str += sparray2.ElementAt(i).ElementAt(18);
			FillLength(str, 50);
			str += sparray2.ElementAt(i).ElementAt(19);
			FillLength(str, 60);
#endif
			fp.WriteString(str);		
			fp.WriteString("\n");
		}
		fp.Close();
	}
	//////////////
	AfxMessageBox("导片成功!", MB_ICONINFORMATION);

#if JEFF_TEST_ON	// 导出裁剪效果图;
	//strSrcDiretory;	// 源相片目录;
	//strSaveDiretory;// 导出选好片的目录;
	if (FALSE == g_List1array.ElementAt(0).ElementAt(60).IsEmpty())
#if USE_SHARE_FLORD
		;
#else
	// 使用多级共享目录,需要重写该函数;
		ExportCutImageToFile(g_List1array.ElementAt(0).ElementAt(60), strSrcDiretory, strSaveDiretory+_T("裁剪效果\\"));
#endif
#else
	{
		ShowCut dlg;
		dlg.m_branch = branch;
		dlg.m_mode = 1;
		dlg.m_id = strOrderNumber;
		dlg.DoModal();
	}
#endif

	CString strlog;
	strlog = " 导出选片 ";
	strlog += "客人:";
	strlog += name1 + name2 + strOrderNumber;

	WriteLog(_T("精修导出选好的片"), strlog);
#endif
}

void BeautifySkinFrom2::OnBUTexportphoto2() // 导出精修的片 按钮;
{
#ifdef USE_KERNEL_DLL
	// 判断登陆用户是否有导出原片的权限;
	if ( !IsHasRights2new(11) )
	{
		AfxMessageBox(_T("您无权限导出原片！"),MB_ICONINFORMATION);
		return;
	}

	// 获取列表信息:域名、订单号、景点名、顾客信息;
	POSITION pos = m_FurtherList.GetFirstSelectedItemPosition();
	if ( pos == NULL )
	{
		AfxMessageBox(_T("请选中您要导出原片的订单！"), MB_ICONINFORMATION);
		return;
	}

	INT nItemCount = m_FurtherList.GetItemCount();
	INT nSelectedItem = m_FurtherList.GetNextSelectedItem(pos);

	CString strBranchId = _T(""); 
	CString strOrderNum = _T("");
	// 初修列表不支持景点名,需要从其他地方获取;
	CString strScenery = _T("");
	CString strCustomerInfo = _T("");

	// 获取域名;
	if ( g_bAllBranch )
	{// 多店汇总时;
		strBranchId = GetDomainFromBranch( m_FurtherList.GetItemText(nSelectedItem, 0) );
	}
	else
	{
		if ( g_branchname.IsEmpty() )
		{// 连接本店时;
			strBranchId = g_domain;
		}
		else
		{// 连接分店时;
			strBranchId = GetDomainFromBranch( g_branchname );
		}
	}

	// 获取订单号;
	strOrderNum = m_FurtherList.GetItemText(nSelectedItem, 0 + m_nAdd);
	// 获取顾客信息;
	strCustomerInfo = m_FurtherList.GetItemText(nSelectedItem, 1 + m_nAdd) + _T(",") + m_FurtherList.GetItemText(nSelectedItem, 2 + m_nAdd); 


	// 获取景点名,需要读取dindanjd表获取，目前只支持儿童成长套系订单;
	IsGrowthTx IsGrowthtxdlg;
	IsGrowthtxdlg.m_mode = 1;
	IsGrowthtxdlg.m_strOrderNumber = strOrderNum;
	IsGrowthtxdlg.DoModal();
	if( IsGrowthtxdlg.m_bReturnOK == 0 || (IsGrowthtxdlg.m_bGrowthTx && IsGrowthtxdlg.m_seltxname.IsEmpty()) )
	{
		return;
	}

	if ( IsGrowthtxdlg.m_bGrowthTx )
	{
		// 读取dindanjd表里的成长套系名,并返回选中的成长套系名;
		strScenery = IsGrowthtxdlg.m_seltxname;
		if ( strScenery == _T("全部") )
		{
			strScenery.Empty();
		}
	}

	// 导出原片时，是否压缩导出;
	DWORD dwExportPix = INVALID_COPY_PIX;	// 通过其他对话框，选择导出时压缩的像素;

	/////////////////////////////////////////////////////////////////////////////////////////////////
	if ( g_pIMGProcess == NULL )
	{
		return ;
	}
	// 获取完信息，开始导出原片;
	ImgExportInterface *pExport = NULL;
	g_pIMGProcess->QueryInterface(IID_ImgExportInterface, (void**)&pExport);
	if ( pExport )
	{
		pExport->ExportFurtherImg(
			TRUE,
			strBranchId,
			strOrderNum,
			strCustomerInfo,
			!strScenery.IsEmpty(),
			strScenery,
			_T("*.jpg|*.jpeg"),
			dwExportPix,
			_T("*.nef|*.cr2|*.raw|*.ra2"),
			FALSE,
			FALSE
			);
	}
	g_pIMGProcess->Release();
	// 结束;
#else
	if (IsHasRights2new(11) == 0)return;

	POSITION pos;
	pos = m_FurtherList.GetFirstSelectedItemPosition();
	if (pos == NULL)
	{
		AfxMessageBox("请先选中您要导出片的定单!", MB_ICONINFORMATION);
		return;
	}
	int iItem = m_FurtherList.GetNextSelectedItem(pos);
	CString id = m_FurtherList.GetItemText(iItem, 0 + m_nAdd);

#if USE_SHARE_FLORD
	CString branch;
	if(g_bAllBranch)
		branch=m_FurtherList.GetItemText (iItem, 0);

	CString strDomain = _T("");
	CString savepath = _T("");
	if (g_bAllBranch)
	{
		if(branch != _T(""))
			strDomain = GetDomainFromBranch(branch);
	}
	else
	{
		if(g_branchname != _T(""))
			strDomain = GetDomainFromBranch(g_branchname);
	}

	// 导出原片时,可以选择只导出单独的景点相片;(如果是儿童版的成长套系,可以导出某个套系的相片)
	// 得到源相片;
	CStringArray array;
	CNetShareInfo::GetInstance()->LoadOrderImages(3, id, strDomain,array);
//	printf("size=%d\n", array.GetSize());
	if(array.GetSize ()==0)
	{
		AfxMessageBox("此单未导片!", MB_ICONINFORMATION);
		return;
	}

	// 获取保存的路径;
	CString dir;
	GetSavePath(dir);
	if(dir.IsEmpty())
	{
		return;
	}

	CString name1=m_FurtherList.GetItemText (iItem, 1+m_nAdd);
	CString name2=m_FurtherList.GetItemText (iItem, 2+m_nAdd);
	dir.TrimRight ('\\');
	dir+="\\";
	dir+=id;
	dir+=g_branchname;
	if(g_bAllBranch)
	{
		if(GetBranchPhotoPath(branch)!="")
			dir+=branch;
	}
	dir+=name1;
	dir+=name2;
	dir+="精修好的片";
	dir+="\\";
	::CreateDirectory (dir, NULL);

	// 新的相片路径;
	int nIndex = 0;
	CString strTemp;
	CStringArray desarray;
	for ( int i = 0; i < array.GetSize(); i++ )
	{
		// 获取到订单号以后的路径字符;
		strTemp = array.ElementAt(i).Mid(array.ElementAt(i).Find(id) + id.GetLength() + 1 );
		desarray.Add(dir + strTemp);

		if ( (nIndex = strTemp.Find("\\")) != -1 )
		{
			strTemp = strTemp.Left( nIndex + 1 );
			CreateDirectory(dir + strTemp, NULL);
		}
	}

#else
	CString branch;
	if (g_bAllBranch)
		branch = m_FurtherList.GetItemText(iItem, 0);
	CString path;
	if (g_bAllBranch)
	{
		CString branchpath = GetBranchPhotoPath(branch);
		path = g_path4 + branchpath + "\\";
	}
	else
		path = g_path4 + "\\";

	path += id;
	path += "\\";

	CStringArray array;

	CString dir;
	GetSavePath(dir);
	if (dir.IsEmpty())
	{
		return;
	}
	CString name1 = m_FurtherList.GetItemText(iItem, 1 + m_nAdd);
	CString name2 = m_FurtherList.GetItemText(iItem, 2 + m_nAdd);
	dir.TrimRight('\\');
	dir += "\\";
	dir += id;
	dir += g_branchname;
	if (g_bAllBranch)
	{
		if (GetBranchPhotoPath(branch) != "")
			dir += branch;
	}
	dir += name1;
	dir += name2;
	dir += "精修好的片";
	dir += "\\";
	::CreateDirectory(dir, NULL);

	CStringArray desarray;
	CStringArray dirarray;
	CString savepath = dir;
	CString str;
	if (1)
	{
		using namespace helper_coffs;
		ffsco o;
		o.dirs(1);
		o.find(LPCSTR(path), LPCSTR("*.*"));
		ffsco::typeT coo;
		ffsco::typeT::iterator it;
		coo = o.co_dir();
		for (it = coo.begin();coo.end() != it;it++)
		{
			str = (*it).c_str();
			if (FindArray(&dirarray, str) == -1)
			{
				dirarray.Add(str);
				if (str != dirarray.ElementAt(0))
				{
					str = savepath + str.Right(str.GetLength() - dirarray.ElementAt(0).GetLength());
					if (::CheckFolderFileExist(str) == 0)
						::CreateDirectory(str, NULL);
				}

			}
		}
	}
	if (1)
	{
		for (int i = 0; i < dirarray.GetSize(); i++)
		{
			using namespace helper_coffs;
			ffsco o;
			o.dirs(0);
			o.find(LPCSTR(dirarray.ElementAt(i)), LPCSTR("*.jpg"));
			ffsco::typeT coo;
			ffsco::typeT::iterator it;
			coo = o.co_file();
			for (it = coo.begin();coo.end() != it;it++)
			{
				str = (*it).c_str();
				if (str.GetAt(str.ReverseFind('\\') + 1) == 's')continue;
				if (str.GetAt(str.ReverseFind('\\') + 1) == 'm')continue;
				array.Add(str);
				desarray.Add(savepath + dirarray.ElementAt(i).Right(dirarray.ElementAt(i).GetLength() - dirarray.ElementAt(0).GetLength()) + str.Right(str.GetLength() - str.ReverseFind('\\') - 1));
			}
		}
	}

	if (array.GetSize() == 0)
	{
		AfxMessageBox("此单未导片!", MB_ICONINFORMATION);
		return;
	}
#endif
	CCompressOption comoptdlg;
	comoptdlg.DoModal();

	ImportPhoto dlg;
	dlg.m_nOutputSize = comoptdlg.m_nsize;
	dlg.m_mode = 1;
	dlg.m_pArray = &array;
	dlg.m_pDesArray = &desarray;
	dlg.m_savepath = dir;
	dlg.DoModal();		AfxMessageBox("导片成功!", MB_ICONINFORMATION);

	CString str;
	str = " 导出精修片 ";
	str += "客人:";
	str += name1 + name2 + id;

	WriteLog(_T("导出精修片"), str);
#endif
}

void BeautifySkinFrom2::OnButton1()
{
	UpdateData();
	m_filter.TrimLeft();
	m_filter.TrimRight();
	FillGrid();
}

void BeautifySkinFrom2::OnButton2()		// 已选未修 按钮;
{
	UpdateData();
	m_filter.TrimLeft();
	m_filter.TrimRight();
	FillGrid(1);
}

void BeautifySkinFrom2::OnItemchangedList2(NMHDR* pNMHDR, LRESULT* pResult)
{
	NM_LISTVIEW* pNMListView = (NM_LISTVIEW*)pNMHDR;

	POSITION pos;
	pos = m_FurtherList.GetFirstSelectedItemPosition();
	if (pos == NULL)
	{
		return;
	}
	int iItem = m_FurtherList.GetNextSelectedItem(pos);
	if (IsHasRights2new(6) || IsHasRights2new(49))
	{
		GetDlgItem(IDC_BUTimportphoto)->EnableWindow(1);
	}
	else
		GetDlgItem(IDC_BUTimportphoto)->EnableWindow(0);

	/*	if(waiter7.IsEmpty () && IsHasRights2new(6)  || IsHasRights2new(49))
	{
	GetDlgItem(IDC_BUTimportphoto)->EnableWindow(1);
	}
	else if(waiter7==g_user.name && IsHasRights2new(6) )
	{
	GetDlgItem(IDC_BUTimportphoto)->EnableWindow(1);
	}
	else
	GetDlgItem(IDC_BUTimportphoto)->EnableWindow(0);*/

	*pResult = 0;
}

void BeautifySkinFrom2::OnClickList2(NMHDR* pNMHDR, LRESULT* pResult)
{
	POSITION pos;
	pos = m_FurtherList.GetFirstSelectedItemPosition();
	if (pos == NULL)return;
	int iItem = m_FurtherList.GetNextSelectedItem(pos);
	g_id = m_FurtherList.GetItemText(iItem, 0 + m_nAdd);
	*pResult = 0;
}

void BeautifySkinFrom2::HidePrice()
{
#ifdef LKAY_VERSION
	if (IsHasRights2new(31))return;
	for (int i = 0; i < m_List1array.GetSize(); i++)
	{
		m_List1array.ElementAt(i).SetAt(14 + m_nAdd, "***");
		m_List1array.ElementAt(i).SetAt(15 + m_nAdd, "***");
		m_List1array.ElementAt(i).SetAt(16 + m_nAdd, "***");
		m_List1array.ElementAt(i).SetAt(13 + m_nAdd, "***");
	}
#else
	if (IsHasRights2new(31))return;
	for (int i = 0; i < m_List1array.GetSize(); i++)
	{
		m_List1array.ElementAt(i).SetAt(17 + m_nAdd, "***");
		m_List1array.ElementAt(i).SetAt(18 + m_nAdd, "***");
	}
#endif
}

void BeautifySkinFrom2::OnBtnsearchfilter()
{
	SearchFilter dlg;
	dlg.m_mode = 3;
	if (dlg.DoModal() == IDOK)FillGrid();
	g_bSearchFilter = 0;
}

void BeautifySkinFrom2::GetData()
{
	if (g_bAllBranch == 0)
	{
		if (g_bShowOK == 0)
		{
#ifdef LKAY_VERSION
			CString filter = "status3='未取' and (dindantype<>'意向客户' or dindantype is null)";
#else
			CString filter = "status3='未取'";
#endif
			g_sendhead.bsql = 0;
			g_sendhead.code[0] = 35;
			g_sendhead.tabcount = 1;
			g_pMainWnd->ProcessChatMessageRequest2(filter);
			if (g_bSendOK == 0)return;
		}
		else
		{
			g_sendhead.bsql = 0;
			g_sendhead.code[0] = 35;
			g_sendhead.tabcount = 1;
#ifdef LKAY_VERSION	
			CString filter = "dindantype<>'意向客户' or dindantype is null";
			g_pMainWnd->ProcessChatMessageRequest2(filter);
#else
			g_pMainWnd->ProcessChatMessageRequest2(1);
#endif
			if (g_bSendOK == 0)return;
		}
		DataToArray(&m_List1array);
	}
	else
	{
		//////////////数据汇总
		m_List1array.RemoveAll();
		CString branch;
		for (int i = -1; i < g_brancharray.GetSize() - 1; i++)
		{
			if (i != -1)
			{
				branch = g_brancharray.ElementAt(i).ElementAt(0);
				g_branchip = g_brancharray.ElementAt(i).ElementAt(1);
				g_pMainWnd->OnDisconnect();
				g_branchname = branch;
				g_bBranchModify = 1;
			}
			else
				branch = g_brancharray.ElementAt(g_brancharray.GetSize() - 1).ElementAt(0);

			if (g_bShowOK == 0)
			{
				CString filter = "status3='未取'";
				g_sendhead.bsql = 0;
				g_sendhead.code[0] = 35;
				g_sendhead.tabcount = 1;
				g_pMainWnd->ProcessChatMessageRequest2(filter); 
				if (g_bSendOK == 0)continue;
			}
			else
			{
				g_sendhead.bsql = 0;
				g_sendhead.code[0] = 35;
				g_sendhead.tabcount = 1;
				g_pMainWnd->ProcessChatMessageRequest2(1); 
				if (g_bSendOK == 0)continue;
			}
			CArray<CStringArray, CStringArray>List1array;
			DataToArray(&List1array);
			int size = m_List1array.GetSize();
			for (int j = 0; j < List1array.GetSize(); j++)
			{
				size++;
				m_List1array.SetSize(size, 1);
				size--;
				m_List1array.ElementAt(size).Copy(List1array.ElementAt(j));
				m_List1array.ElementAt(size).InsertAt(0, branch);
				size++;
			}
		}
		g_pMainWnd->OnDisconnect();
		g_bBranchModify = 0; g_branchip = g_branchname = "";
	}
	HidePrice();
	FillGrid();
}

void BeautifySkinFrom2::OnBUTprint3()
{
	GetData();
}

// Jeff.没看到调用的地方,也没有关联任何按钮控件.
// 应该是废弃的函数;
void BeautifySkinFrom2::OnBUTexportphotoAddName()
{
	if (IsHasRights2new(10) == 0)return;

	UpdateData();
	POSITION pos;
	pos = m_FurtherList.GetFirstSelectedItemPosition();
	if (pos == NULL)
	{
		AfxMessageBox("请先选中您要导片的定单!", MB_ICONINFORMATION);
		return;
	}
	int iItem = m_FurtherList.GetNextSelectedItem(pos);
	CString status2 = m_FurtherList.GetItemText(iItem, 4);
	if (status2 != "OK")
	{
		AfxMessageBox("此单未选片!", MB_ICONINFORMATION);
		return;
	}

	CString id = m_FurtherList.GetItemText(iItem, 0);
	CString name1 = m_FurtherList.GetItemText(iItem, 1);
	CString name2 = m_FurtherList.GetItemText(iItem, 2);
	CString filter = "id='" + id + "';id='" + id + "'";
	g_sendhead.bsql = 0;
	g_sendhead.code[0] = 50;
	g_sendhead.code[1] = 11;
	g_sendhead.tabcount = 2;
	g_pMainWnd->ProcessChatMessageRequest2(filter); 
	if (g_bSendOK == 0)return;
	CArray<CStringArray, CStringArray>sparray;
	DataToArray(&sparray, &g_List1array);

	CString path = g_path2 + "\\";

	SelectPhotoDlg selectdlg;
	selectdlg.DoModal();

	path += id;
	path += "\\";
	////////////////////////////////////////
	CString str, spname;
	CStringArray noarray;
	CStringArray spnamearray;

	int i = 0;
	for ( i = 0; i < sparray.GetSize(); i++)
	{
		str = sparray.ElementAt(i).ElementAt(6);
		spname = sparray.ElementAt(i).ElementAt(5);
		GetNo(str, noarray);
	}
	if (noarray.GetSize() == 0)
	{
		AfxMessageBox("此单未选片!", MB_ICONINFORMATION);
		return;
	}

	spnamearray.SetSize(noarray.GetSize());
	for (i = 0; i < noarray.GetSize(); i++)
	{
		str = noarray.ElementAt(i);
		spnamearray.SetAt(i, GetSelName(str, sparray) + "-" + str);
	}

	CString dir;
	GetSavePath(dir);
	if (dir.IsEmpty())return;
	dir.TrimRight('\\');
	dir += "\\";
	dir += id;
	dir += name1;
	dir += name2;
	dir += "选片";
	dir += "\\";

	CStringArray array;
	CStringArray spnamearray2;
	CString src, des;

	//selectdlg.m_mode: 1=原片 2=初修 0=初修+原片
	if (selectdlg.m_mode == 2)
	{
		for (i = 0; i < noarray.GetSize(); i++)
		{
			src.Format("%s%s.jpg", path, noarray.ElementAt(i));
			if (::CheckFolderFileExist(src))
			{
				array.Add(src);
				if (selectdlg.m_check1)
					spnamearray2.Add(spnamearray.ElementAt(i));
				else
					spnamearray2.Add(noarray.ElementAt(i));
			}
			else
				AfxMessageBox("未找到初修过的文件:" + src.Right(src.GetLength() - src.ReverseFind('\\') - 1), MB_ICONINFORMATION);
		}
	}
	if (array.GetSize() == 0)
	{
		if (selectdlg.m_mode == 2)
			AfxMessageBox("注意:此单未修片, 导出的是原片!", MB_ICONINFORMATION);
		path = g_path1 + "\\";
		path += id;
		path += "\\";
		dir.Delete(dir.GetLength() - 1, 1);
		dir += "(未修)\\";
		for (i = 0; i < noarray.GetSize(); i++)
		{
			src = GetPathFromNo2(path, noarray.ElementAt(i));
			if (PathFileExists(src))
			{
				array.Add(src);
				if (selectdlg.m_check1)
					spnamearray2.Add(spnamearray.ElementAt(i));
				else
					spnamearray2.Add(noarray.ElementAt(i));
			}
		}
	}
	if (array.GetSize() == 0)
	{
		AfxMessageBox("此单未导入原片!", MB_ICONINFORMATION);
		return;
	}
	::CreateDirectory(dir, NULL);
	ImportPhoto dlg;
	dlg.m_mode = 1;
	dlg.m_pArray = &array;
	dlg.m_pArray2 = &spnamearray2;
	dlg.m_savepath = dir;
	dlg.DoModal();
	//////////////
	if (g_List1array.GetSize())
	{
		CStdioFile fp;
		fp.Open(dir + "客户要求.txt", CFile::modeCreate | CFile::modeWrite);
		fp.WriteString(g_List1array.ElementAt(0).ElementAt(39));
		fp.Close();
	}
	//////////////
	AfxMessageBox("导片成功!", MB_ICONINFORMATION);
}


#if USE_SHARE_FLORD
/************************************************************************/
/* 
	函数:GetCurSelRecord
	描述:获取当前List列表选中的项记录;
	参数:
		OUT:strName1		选中项的顾客1姓名;
		OUT:strName2		选中项的顾客2姓名;
		OUT:strOrderNum		选中项的订单号;
		OUT:strDomain		选中项的所在分店域名,本店为空;

	返回:
	调用约定:
	注意:
*/
/************************************************************************/
void BeautifySkinFrom2::GetCurSelRecord(
										OUT CString &strName1, 
										OUT CString &strName2, 
										OUT CString &strOrderNum, 
										OUT CString &strBranch,
										OUT CString &strDomain)
{
	UpdateData();

	// 获取所中行;
	POSITION pos = m_FurtherList.GetFirstSelectedItemPosition();
	if ( pos == NULL)
	{
		AfxMessageBox(_T("请先选中您要导片的定单!"), MB_ICONINFORMATION);
		return;
	}

	int nItem = m_FurtherList.GetNextSelectedItem(pos);
	
	// 获取选片状态, m_nAdd作用?;
	CString strStatus = m_FurtherList.GetItemText(nItem,4 + m_nAdd);
	if ( strStatus != _T("OK") )
	{
		AfxMessageBox(_T("此单未选片!"), MB_ICONINFORMATION);
		return;
	}

	strOrderNum = m_FurtherList.GetItemText(nItem, 0 + m_nAdd);
	strName1 = m_FurtherList.GetItemText(nItem, 1 + m_nAdd);
	strName2 = m_FurtherList.GetItemText(nItem, 2 + m_nAdd);

	if ( g_bAllBranch )
	{
		// 多店汇总时;
		strBranch = m_FurtherList.GetItemText(nItem, 0);
		strDomain = GetDomainFromBranch(strBranch);
	}
	else
	{
		if(g_branchname != _T(""))
		{
			strBranch = g_branchname;
			strDomain = GetDomainFromBranch(g_branchname);
		}
	}
}

/************************************************************************/
/* 
	函数:GetImageWithGoods
	描述:获取每张相片对应的商品串;
	参数:
		IN:		strBranch 分店名(多店汇总时)
		IN:		strDomain 分店域名(多店汇总或分店连接时);
		IN:		strOrderNum 订单号;
		OUT:	bGrowth 是否是儿童套系;	
		OUT:	strSelGrowth 若bGrowth为TRUE,则这里为选中的成长套系名称;
		OUT:	bExportWithName 导出选好的片是否带商品名;
		OUT:	strAryOfImagePath 选中的相片路径;
		OUT:	strEachImageOfGoods与strAryOfImagePath元素位置对应,每一个元素都是strAryOfImagePath元素的商品表(用分号隔开);

	返回:返回导出的相片类型,== -1 无相片, 1 == 原片,0 == 初修片, 3 == 无初修,使用原片, //== 4 选择的是原片,但原片空....
	调用约定:
	注意:
*/
/************************************************************************/
int BeautifySkinFrom2::GetImageWithGoods(
									IN CString &strBranch,
									IN CString &strDomain,
									IN CString &strOrderNum, 
									OUT BOOL &bGrowth, 
									OUT CString &strSelGrowth, 
									OUT BOOL &bExportWithName,
									OUT CStringArray &strAryOfImagePath,
									OUT CStringArray &strAryOfEachImageOfGoods,
									OUT CArray<CStringArray, CStringArray> &sparray2)
{
	// 若是儿童成长套系,则弹出选项框;
	CStringArray strAryOfScenery;
	IsGrowthTx growthtxdlg;
	growthtxdlg.m_mode = 1;
	growthtxdlg.m_pAryOfScenery = &strAryOfScenery;
	growthtxdlg.m_strOrderNumber = strOrderNum;
	growthtxdlg.DoModal();

	bGrowth = growthtxdlg.m_bGrowthTx;
	strSelGrowth = growthtxdlg.m_seltxname;

	// 与服务器通信获取指定条件的订单商品信息;
	CString strFilter = _T("");
#ifdef CHILD_VERSION
	if ( !strSelGrowth.IsEmpty() && strSelGrowth != _T("全部") )
	{
		strFilter.Format(_T("id='%s' and growthtxname = '%s'; id='%s'; id='%s' and name <> '入册' and name <> '入底'"), strOrderNum, strSelGrowth, strOrderNum, strOrderNum);
	}
	else
	{
		strFilter.Format(_T("id='%s'; id='%s'; id='%s' and name <> '入册' and name <> '入底'"), strOrderNum, strOrderNum, strOrderNum);
	}
#else
	strFilter.Format(_T("id='%s'; id='%s'; id='%s' and kind <> '2' and name <> '入册' and name <> '入底'"), strOrderNum, strOrderNum, strOrderNum);
#endif

	g_sendhead.bsql = 0;
	g_sendhead.code[0] = 50;
	g_sendhead.code[1] = 11;
	g_sendhead.code[2] = 56;
	g_sendhead.tabcount = 3;
	if( !g_bAllBranch )
	{
		g_pMainWnd->ProcessChatMessageRequest2(strFilter);
	}
	else
	{
		g_branchip = GetIP(strBranch);
		g_pMainWnd->OnDisconnect();
		g_branchname = strBranch;
		g_bBranchModify = 1;
		g_pMainWnd->ProcessChatMessageRequest2(strFilter);
		g_pMainWnd->OnDisconnect();
		g_bBranchModify = 0;
		g_branchip = g_branchname = _T("");
	}

	if( !g_bSendOK )
		return -1;

	CArray<CStringArray, CStringArray> sparray;
	//CArray<CStringArray, CStringArray> sparray2;
	DataToArray( &sparray, &g_List1array, &sparray2 );	
	
	CString strTemp;
	CStringArray strAryOfImageNum;	// 所有相片的数字编号;

	// 获取所有dindansp记录no字段中的相片编号;
	int i = 0;
	int nSize = sparray.GetSize();
	for ( i = 0; i < nSize; i++)
	{
		strTemp = sparray.ElementAt(i).ElementAt(6);	// dindansp表中的no字段;
	//	WriteTextLog(_T("no:") + strTemp);
		GetNo(strTemp, strAryOfImageNum);
	}

	if ( strAryOfImageNum.GetSize() == 0 )
	{
		AfxMessageBox(_T("此单未选片!"),MB_ICONINFORMATION);
		return -1;
	}

	// 获取每个相片编号关联的商品集合,用分号隔开;
	strAryOfEachImageOfGoods.SetSize(strAryOfImageNum.GetSize());
	nSize = strAryOfImageNum.GetSize();
	for( int n = 0; n < nSize; n++)
	{
		strTemp = strAryOfImageNum.ElementAt(n);
	//	WriteTextLog(_T("关联的号码:") + strTemp);
		CString strspnames = GetSelName(strTemp, sparray);
	//	WriteTextLog(_T("关联的商品:") + strspnames);
		strAryOfEachImageOfGoods.SetAt(n, strspnames);
	}

	CStringArray strTempImageGoods;
	strTempImageGoods.Copy(strAryOfEachImageOfGoods);

	SelectPhotoDlg selectdlg;
	selectdlg.DoModal();

	bExportWithName = selectdlg.m_check1;
	int nPhotoType = selectdlg.m_mode;	//mode模式:2.初修 1.原片 0.初修+原片 //相片类型1=原片 2=初修 3=精修 4=设计		

	// 遍历所有共享目录,查找相片路径;
	CStringArray imagePathArr;
	CStringArray imageNumArr;
	imageNumArr.Copy(strAryOfImageNum);
	if(nPhotoType == 0)
	{
	//	printf(_T("原片+初修\n"));
		for(i=2; i>0; --i)
		{
			imagePathArr.RemoveAll();
			
			LoadExistsImagesEx(i, strDomain, strOrderNum, bGrowth, strSelGrowth, strAryOfScenery, imageNumArr, imagePathArr, strAryOfEachImageOfGoods);
			if(strAryOfImagePath.GetSize() == 0)
				strAryOfImagePath.Append(imagePathArr);
			else
			{
				int nSize = strAryOfImagePath.GetSize();
				for(int j=0; j<nSize; j++)
				{
					//去掉相同的相片
					CString strName1 = strAryOfImagePath.ElementAt(j);
					strName1 = strName1.Right(strName1.GetLength() - strName1.ReverseFind('\\') - 1);
					for(int k=0; k<imagePathArr.GetSize(); k++)
					{
						CString strName2 = imagePathArr.ElementAt(k);
						strName2 = strName2.Right(strName2.GetLength() - strName2.ReverseFind('\\') - 1);
						if(strName1 == strName2)
						{
							imagePathArr.RemoveAt(k);
							break;
						}
					}
				}

				if(imagePathArr.GetSize() > 0)
					strAryOfImagePath.Append(imagePathArr);
			}
		}
	}
	else
	{
		LoadExistsImagesEx(nPhotoType, strDomain, strOrderNum, bGrowth, strSelGrowth, strAryOfScenery, imageNumArr, imagePathArr, strAryOfEachImageOfGoods);
		if(imagePathArr.GetSize() > 0)
			strAryOfImagePath.Copy(imagePathArr);
	}

	if ( strAryOfImagePath.GetSize() == 0 && nPhotoType == 2)
	{
		AfxMessageBox(_T("注意:此单未修片, 导出的是原片!"), MB_ICONINFORMATION);
		nPhotoType = 1;
		strAryOfImagePath.RemoveAll();
		strAryOfEachImageOfGoods.RemoveAll();
		strAryOfEachImageOfGoods.Copy(strTempImageGoods);
		LoadExistsImagesEx(nPhotoType,strDomain,strOrderNum,bGrowth,strSelGrowth,strAryOfScenery,imageNumArr,imagePathArr,strAryOfEachImageOfGoods);
		
		if(imagePathArr.GetSize() > 0)
			strAryOfImagePath.Append(imagePathArr);
		return strAryOfImagePath.GetSize() ? 3 : -1;
	}

	//按编号排序
	CStringArray tempPathArr;
	tempPathArr.Copy(strAryOfImagePath);
	strAryOfImagePath.RemoveAll();
	for(int j=0; j<imageNumArr.GetSize(); j++)
	{
		BOOL bExists = FALSE;
		CString strNum = imageNumArr.ElementAt(j);
		for(i=0; i<tempPathArr.GetSize(); i++)
		{
			CString strFile = tempPathArr.ElementAt(i);
			strFile = strFile.Mid(strFile.ReverseFind('\\')+1);
			int nPos = strFile.Find(_T("."));
			if(nPos == -1)
				continue;
			
			strFile = strFile.Left(nPos);
			if(strNum.CompareNoCase(strFile) == 0)
			{
				strAryOfImagePath.Add(tempPathArr.ElementAt(i));
				bExists = TRUE;
				break;
			}
		}
		if(!bExists)
			strAryOfImagePath.Add(_T(""));
	}

	return strAryOfImagePath.GetSize() ? selectdlg.m_mode : -1;
}

/************************************************************************/
/* 
	函数:LoadExistsImagesEx
	描述:加载存在的相片编号文件;
	参数:
		IN:nPhotoType	导出的相片类型;
		IN:lpDomain		域名;
		IN:lpOrderNum	订单号;
		IN:bGrowTh		是否儿童成长套系;
		IN:lpSelectName	选中的成长套系名;
		IN:strAryOfScenery	订单下的景点名或儿童成长套系名数组;
		IN:strAryOfImageNum	订单选好商品的相片编号数组;
		OUT:strAryOfImagePath	存在于共享目录的相片编号文件路径数组;
		OUT:strAryOfImageGoods	存在于共享目录的相片关联的商品数组;
	返回:
	调用约定:
	注意:
*/
/************************************************************************/
void BeautifySkinFrom2::LoadExistsImagesEx(IN const int &nPhotoType, 
										 IN LPCTSTR lpDomain, 
										 IN LPCTSTR lpOrderNum, 
										 IN BOOL bGrowTh, 
										 IN LPCTSTR lpSelectName,
										 IN CStringArray &strAryOfScenery, 
										 IN CStringArray &strAryOfImageNum,
										 OUT CStringArray &strAryOfImagePath,
										 OUT CStringArray &strAryOfImageGoods)
{
	CStringArray strTempNum;					//临时相片编号如:001,002
	strTempNum.Copy(strAryOfImageNum);
	CStringArray strTempImagePath;				//临时相片路径集
	//根据选好的相片编号查找
	CNetShareInfo::GetInstance()->LoadOrderBySelectedImages(nPhotoType, lpOrderNum, lpDomain, strTempNum, strTempImagePath);


	CString strScenery(lpSelectName);
/*
	printf("-----bGrowTh = %d---------------strScenery = %s--------------------\n", bGrowTh, lpSelectName);
*/
	if ( bGrowTh && ( !strScenery.IsEmpty() && strScenery != _T("全部")) )
	{
		// 保留套系名下的相片;
		CString str;
		if ( nPhotoType == 1 )
		{
			// 原片;
			for ( int i = 0; i < strTempImagePath.GetSize(); i++)
			{
				str = strTempImagePath.ElementAt(i);
				str = str.Mid(str.Find(lpOrderNum) + strlen(lpOrderNum) + 1);
				str = str.Left(str.Find('\\'));
				if ( str.CompareNoCase(strScenery) == 0 )
				{
					strAryOfImagePath.Add(strTempImagePath.ElementAt(i));
				}
			}
		}
		else
		{
			// 初修;
			for ( int i = 0; i < strTempImagePath.GetSize(); i++)
			{
				str = strTempImagePath.ElementAt(i);
				int nIndex = str.Find(lpOrderNum);
				str.Insert(nIndex + strlen(lpOrderNum) + 1, strScenery + _T("\\"));
				if ( PathFileExists(str) )
					strAryOfImagePath.Add(strTempImagePath.ElementAt(i));
			}
		}
	}
	else
	{
		/*
		for(int i=0; i<strTempImagePath.GetSize(); )
		{
			CString strPath = strTempImagePath.ElementAt(i);
			strPath = strPath.Right(strPath.GetLength() - strPath.ReverseFind('\\') - 1);
			strPath = strPath.Left(strPath.Find('.'));
			printf("strPath = %s\n", strPath);
			if(FindArray(&strTempNum, strPath) == -1)
			{
				printf("remove = %s\n", strTempImagePath.ElementAt(i));
				strTempImagePath.RemoveAt(i);
			}
			else
				i++;
		}
		*/
		strAryOfImagePath.Copy(strTempImagePath);
	}

	/*test
	for(int i=0; i<strAryOfImagePath.GetSize(); i++)
		printf("path10 = %s\n", strAryOfImagePath.ElementAt(i));
	*/
}
#endif