// outsourcing.cpp : implementation file
//
#include "stdafx.h"
#include "ylgl.h"
#include "outsourcing.h"
#include "MyMdi.H"
#include "ModifyDinDan.h"
#include "outsourcingDlg.h"
#include "outsourcingDlg2.h"
#include "outsourcing2.h"
#include "outsourcing3.h"
#include "outsourcing4.h"
#include "DlgScanBarCode.h"
#include "SendMsgDlg.h"


#ifdef _DEBUG
#define new DEBUG_NEW
#undef THIS_FILE
static char THIS_FILE[] = __FILE__;
#endif
#pragma comment(lib, "Shlwapi.lib")

IMPLEMENT_DYNCREATE(outsourcing, MyFormView)

outsourcing::outsourcing() : MyFormView(outsourcing::IDD)
{

	m_filter = _T(""); m_nAdd = 0;
	if (g_bAllBranch)
	{
		m_nAdd = 1;
	}
}

outsourcing::~outsourcing()
{
}

void outsourcing::DoDataExchange(CDataExchange* pDX)
{
	MyFormView::DoDataExchange(pDX);

	DDX_Control(pDX, IDC_COMBO1, m_combo1);
	DDX_Control(pDX, IDC_LIST2, m_List1);
	DDX_Control(pDX, IDC_STATIC1, m_static1);
	DDX_CBString(pDX, IDC_COMBO1, m_filter);
}

BEGIN_MESSAGE_MAP(outsourcing, MyFormView)
	ON_BN_CLICKED(IDC_BUTclose, OnBUTclose)
	ON_BN_CLICKED(IDC_BUTTON1, OnButton1)
	ON_CBN_SELCHANGE(IDC_COMBO1, OnSelchangeCombo1)
	ON_WM_TIMER()
	ON_BN_CLICKED(IDC_BUTmodify, OnBUTmodify)
	ON_NOTIFY(NM_DBLCLK, IDC_LIST2, OnDblclkList2)
	ON_BN_CLICKED(IDC_BUTexport, OnBUTexport)
	ON_BN_CLICKED(IDC_BUTmodify2, OnBUTmodify2)
	ON_NOTIFY(NM_RDBLCLK, IDC_LIST2, OnRdblclkList2)
	ON_BN_CLICKED(IDC_BUTToPhotoPrint, OnBUTToPhotoPrint)
	ON_BN_CLICKED(IDC_BUTburncd, OnBUTburncd)
	ON_BN_CLICKED(IDC_BUTTON2, OnButton2)
	ON_BN_CLICKED(IDC_BUTTON3, OnButton3)
	ON_NOTIFY(NM_CLICK, IDC_LIST2, OnClickList2)
	ON_BN_CLICKED(IDC_BUTburncd2, OnBUTburncd2)
	ON_NOTIFY(NM_CUSTOMDRAW, IDC_LIST2, OnCustomdrawList)
#ifdef VC60
	ON_BN_CLICKED(BTN_SENDSMS, OnBnClickedSendsms)
	ON_BN_CLICKED(BTN_PRINTBAR, OnBnClickedPrintbar)
	ON_BN_CLICKED(BTN_SCANBACKITEM, OnBnClickedScanbackitem)
	ON_BN_CLICKED(BTN_SCANPICKUP, OnBnClickedScanpickup)
#else
	ON_BN_CLICKED(BTN_SENDSMS, &outsourcing::OnBnClickedSendsms)
	ON_BN_CLICKED(BTN_PRINTBAR, &outsourcing::OnBnClickedPrintbar)
	ON_BN_CLICKED(BTN_SCANBACKITEM, &outsourcing::OnBnClickedScanbackitem)
	ON_BN_CLICKED(BTN_SCANPICKUP, &outsourcing::OnBnClickedScanpickup)
#endif
END_MESSAGE_MAP()

/////////////////////////////////////////////////////////////////////////////

#ifdef _DEBUG
void outsourcing::AssertValid() const
{
	MyFormView::AssertValid();
}

void outsourcing::Dump(CDumpContext& dc) const
{
	MyFormView::Dump(dc);
}
#endif //_DEBUG

/////////////////////////////////////////////////////////////////////////////
void outsourcing::OnInitialUpdate()
{
	MyFormView::OnInitialUpdate();
	CMyMdi Mdi;
	Mdi.SetSubView((CWnd*)GetParent(), (CWnd*)this);

	CRect rc2;
	GetWindowRect(rc2);
	::MoveWindow(m_hWnd, g_rc.left, g_rc.top, g_rc.Width(), g_rc.Height(), TRUE);

	EnumChildWindows(m_hWnd, (WNDENUMPROC)EnumChildProc, 0);
#ifdef LKAY_VERSION
	GetDlgItem(IDC_BUTexport)->ShowWindow(SW_SHOW);
	GetDlgItem(IDC_BUTToPhotoPrint)->ShowWindow(SW_SHOW);
#endif
	int btnwid;
	CRect prerc;	
	int idcount = 5;
	{
		int idarray[] = { IDC_BUTmodify, IDC_BUTmodify2, IDC_BUTburncd, IDC_BUTburncd2, IDC_BUTclose };
		idcount = 5;
		for (int a = idcount - 2; a >= 0; a--)
		{
			GetDlgItem(idarray[a + 1])->GetWindowRect(prerc);
			ScreenToClient(prerc);
			GetDlgItem(idarray[a])->GetWindowRect(rc2);
			ScreenToClient(rc2);
			btnwid = rc2.Width();
			rc2.right = prerc.left;
			rc2.left = rc2.right - btnwid;
			GetDlgItem(idarray[a])->MoveWindow(rc2);
		}
	}

	int idarray2[] = { IDC_BUTTON1, IDC_BUTTON2, IDC_BUTTON3, IDC_BUTexport, IDC_BUTToPhotoPrint };
	idcount = 5;

	for (int a = 1; a < idcount; a++)
	{
		GetDlgItem(idarray2[a - 1])->GetWindowRect(prerc);
		ScreenToClient(prerc);
		GetDlgItem(idarray2[a])->GetWindowRect(rc2);
		ScreenToClient(rc2);
		btnwid = rc2.Width();
		rc2.left = prerc.right;
		rc2.right = rc2.left + btnwid;
		GetDlgItem(idarray2[a])->MoveWindow(rc2);
	}

	m_static1.SetFont(&g_titlefont);

	if (g_bAllBranch == 0)
	{
#ifdef CHILD_VERSION // Jeff.设计后添加设计师;
#ifdef LKAY_VERSION
		m_List1.SetHeadings("订单号,100;家长姓名,100;宝宝姓名,100;设计,100;设计师,100;加急,100;取件日期,100;接单人,100;商品名称,100;是否发出,100;是否返工,100;是否完成,100;是否组件,100;是否转走,100;是否取走,100;加急,100;取件日期,100;手机,100;固定电话,100" );
#else	// 17.column
		m_List1.SetHeadings("订单号,100;家长姓名,100;宝宝姓名,100;设计,100;设计师,100;加急,100;取件日期,100;接单人,100;商品名称,100;是否发出,100;是否返工,100;是否完成,100;是否取走,100;加急,100;取件日期,100;手机,100;固定电话,100");
#endif
#else
		m_List1.SetHeadings("订单号,100;男宾姓名,100;女宾姓名,100;设计,100;设计师,100;加急,100;取件日期,100;接单人,100;商品名称,100;是否发出,100;是否返工,100;是否完成,100;是否取走,100;加急,100;取件日期,100;男宾电话,100;女宾电话,100" );
#endif
		m_List1.LoadColumnInfo(121);
	}
	else
	{

#ifdef CHILD_VERSION
		m_List1.SetHeadings("店名,100;订单号,100;家长姓名,100;宝宝姓名,100;设计,100;设计师,100;加急,100;取件日期,100;接单人,100;商品名称,100;是否发出,100;是否返工,100;是否完成,100;是否取走,100;加急,100;取件日期,100;手机,100;固定电话,100");
#else
		m_List1.SetHeadings("店名,100;订单号,100;男宾姓名,100;女宾姓名,100;设计,100;设计师,100;加急,100;取件日期,100;接单人,100;商品名称,100;是否发出,100;是否返工,100;是否完成,100;是否取走,100;加急,100;取件日期,100;男宾电话,100;女宾电话,100" );
#endif
		m_List1.LoadColumnInfo(305);
	}

#if JEFF_DELETE_OFF	// 多产品时排序有问题;
	m_List1.m_bSortSupport = 0;
#endif
	GetData();
	for (int i = 0; i < g_userarray.GetSize(); i++)
	{
		m_combo1.AddString(g_userarray.ElementAt(i).ElementAt(1));
	}
	FillGrid();
	m_combo1.GetWindowRect(rc2);
	ScreenToClient(rc2);
	rc2.bottom += 200;
	m_combo1.MoveWindow(rc2);
	GetDlgItem(IDC_BUTclose)->GetWindowRect(rc2);
	SetComboHei(&m_combo1, rc2.Height());
	GetDlgItem(IDC_BUTmodify)->EnableWindow(IsHasRights2new(13));
	GetDlgItem(IDC_BUTmodify2)->EnableWindow(IsHasRights2new(13));
}

void outsourcing::FillGrid(BOOL bStatus)
{
	m_List1.DeleteAllItems2();
	int ii = 0;
	m_List1.m_arLabels.SetSize(m_List1array.GetSize(), 1);
	int count = 0;
	if (m_filter.IsEmpty() || bStatus)
	{
		if (bStatus == 2)	// 近期取件;
		{
			CTime tm(atoi(g_date.Mid(0, 4)), atoi(g_date.Mid(5, 2)), atoi(g_date.Mid(8, 2)), 0, 0, 0);
			CString sdate1, sdate2;
			sdate1 = tm.Format("%Y-%m-%d");
			CTimeSpan sp(15, 0, 0, 0);
			tm += sp;
			sdate2 = tm.Format("%Y-%m-%d");
			BOOL bFinded = 0;
			int begin, end;
			CString oldid = "";
			for (ii = 0; ii < m_List1.m_arLabels.GetSize(); ii++)
			{
				if (oldid.IsEmpty())
				{
					// 订单号;
					oldid = m_List1array.ElementAt(ii).ElementAt(0 + m_nAdd);
					begin = ii;
					continue;
				}
				if (ii == (m_List1.m_arLabels.GetSize() - 1) || (m_List1array.ElementAt(ii).ElementAt(0 + m_nAdd) != "" && m_List1array.ElementAt(ii).ElementAt(0 + m_nAdd) != oldid))
				{
					end = ii - 1;
					bFinded = 0;
					for (int a = begin; a <= end; a++)
					{
						// 查询条件== 整个订单取件日期 || 单个商品取件日期
						if ((m_List1array.ElementAt(a).ElementAt(6 + m_nAdd) >= sdate1 && m_List1array.ElementAt(a).ElementAt(6 + m_nAdd) <= sdate2) || (m_List1array.ElementAt(a).ElementAt(14 + m_nAdd) >= sdate1 && m_List1array.ElementAt(a).ElementAt(14 + m_nAdd) <= sdate2))
						{
							bFinded = 1;
							break;
						}
					}
					if (bFinded == 1)
					{
						for (int a = begin; a <= end; a++)
						{
							m_List1.m_arLabels.ElementAt(count++).Copy(m_List1array.ElementAt(a));
						}
					}
					begin = ii;
					oldid = m_List1array.ElementAt(ii).ElementAt(0 + m_nAdd);
				}
			}
		}
		else if (bStatus == 1)	// 查询完成;
		{
			{BOOL bFinded = 0;
			int begin, end;
			CString oldid = "";
			for (ii = 0; ii < m_List1.m_arLabels.GetSize(); ii++)
			{
				if (oldid.IsEmpty())
				{
					oldid = m_List1array.ElementAt(ii).ElementAt(0 + m_nAdd);
					begin = ii;
					continue;
				}
				if (ii == (m_List1.m_arLabels.GetSize() - 1) || (m_List1array.ElementAt(ii).ElementAt(0 + m_nAdd) != "" && m_List1array.ElementAt(ii).ElementAt(0 + m_nAdd) != oldid))
				{
					end = ii - 1;
					bFinded = 0;
					for (int a = begin; a <= end; a++)
					{
						// 查询条件==产品完成;
						if (m_List1array.ElementAt(a).ElementAt(11 + m_nAdd) != "OK")
						{
							bFinded = 1;
							break;
						}
					}
					if (bFinded == 0)
					{
						for (int a = begin; a <= end; a++)
						{
							m_List1.m_arLabels.ElementAt(count++).Copy(m_List1array.ElementAt(a));
						}
					}
					begin = ii;
					oldid = m_List1array.ElementAt(ii).ElementAt(0 + m_nAdd);
				}
			}
			}
		}
		else if (bStatus == 3)//已完成未取;
		{
			{BOOL bFinded = 0; BOOL bFinded2 = 0;
			int begin, end;
			CString oldid = "";
			for (ii = 0; ii < m_List1.m_arLabels.GetSize(); ii++)
			{
				if (oldid.IsEmpty())
				{
					oldid = m_List1array.ElementAt(ii).ElementAt(0);
					begin = ii;
					continue;
				}
				if (ii == (m_List1.m_arLabels.GetSize() - 1) || (m_List1array.ElementAt(ii).ElementAt(0) != "" && m_List1array.ElementAt(ii).ElementAt(0) != oldid))
				{
					end = ii - 1;
					bFinded = 0; bFinded2 = 0;
					for (int a = begin; a <= end; a++)
					{
						// 查询条件==产品未完成;
						if (m_List1array.ElementAt(a).ElementAt(11) != "OK")
						{
							bFinded = 1;
							break;
						}

						// 查询条件==未取走;
						if (m_List1array.ElementAt(a).ElementAt(12) != "OK")
						{
							bFinded2 = 1;
						}
					}
					if (bFinded == 0 && bFinded2)
					{
						for (int a = begin; a <= end; a++)
						{
							m_List1.m_arLabels.ElementAt(count++).Copy(m_List1array.ElementAt(a));
						}
					}
					begin = ii;
					oldid = m_List1array.ElementAt(ii).ElementAt(0);
				}
			}
			}
		}
		else if (bStatus == 4)//已取未转入历史订单;
		{
			BOOL bFinded = 0;
			BOOL bFinded2 = 0;
			int begin, end;
			CString oldid = "";
			for (ii = 0; ii < m_List1.m_arLabels.GetSize(); ii++)
			{
				if (oldid.IsEmpty())
				{
					oldid = m_List1array.ElementAt(ii).ElementAt(0);
					begin = ii;
					continue;
				}
				if (ii == (m_List1.m_arLabels.GetSize() - 1) || (m_List1array.ElementAt(ii).ElementAt(0) != "" && m_List1array.ElementAt(ii).ElementAt(0) != oldid))
				{
					end = ii - 1;
					bFinded = 0; bFinded2 = 0;
					for (int a = begin; a <= end; a++)
					{
						// 查询条件==未取走;
						if (m_List1array.ElementAt(a).ElementAt(12) != "OK")
						{
							bFinded = 1;
							break;
						}
						// 查询条件==未加急;
						if (m_List1array.ElementAt(a).ElementAt(13) != "OK")
						{
							bFinded2 = 1;
						}
					}
					if (bFinded == 0 && bFinded2)
					{
						for (int a = begin; a <= end; a++)
						{
							m_List1.m_arLabels.ElementAt(count++).Copy(m_List1array.ElementAt(a));
						}
					}
					begin = ii;
					oldid = m_List1array.ElementAt(ii).ElementAt(0);
				}
			}

		}
		else
		{
			for (ii = 0; ii < m_List1.m_arLabels.GetSize(); ii++)
			{
				m_List1.m_arLabels.ElementAt(count++).Copy(m_List1array.ElementAt(ii));
			}
		}
	}
	else
	{
		int nAdd = 0;
#ifdef LKAY_VERSION
		nAdd=2;
#endif
		int type = GetType(m_filter);
		if (type == 1)//电话;
		{
			BOOL bFinded = 0;
			for (ii = 0; ii < m_List1.m_arLabels.GetSize(); ii++)
			{
				if (bFinded && m_List1array.ElementAt(ii).ElementAt(0 + m_nAdd).IsEmpty())
				{
					m_List1.m_arLabels.ElementAt(count++).Copy(m_List1array.ElementAt(ii));
					continue;
				}

				// 查询条件==手机1||手机2;
				if (m_List1array.ElementAt(ii).ElementAt(16 + nAdd + m_nAdd).Find(m_filter) != -1 || m_List1array.ElementAt(ii).ElementAt(17 + nAdd + m_nAdd).Find(m_filter) != -1)
				{
					bFinded = 1;
					m_List1.m_arLabels.ElementAt(count++).Copy(m_List1array.ElementAt(ii));
				}
				else
				{
					bFinded = 0;
				}
			}
		}
		else if (type == 2)//拼音;
		{
			BOOL bFinded = 0;
			m_filter.MakeUpper();
			for (ii = 0; ii < m_List1.m_arLabels.GetSize(); ii++)
			{
				if (bFinded && m_List1array.ElementAt(ii).ElementAt(0 + m_nAdd).IsEmpty())
				{
					m_List1.m_arLabels.ElementAt(count++).Copy(m_List1array.ElementAt(ii));
					continue;
				}

				// 查询条件==拼音1||拼音2;
				if (m_List1array.ElementAt(ii).ElementAt(18 + nAdd + m_nAdd).Find(m_filter) != -1 || m_List1array.ElementAt(ii).ElementAt(19 + nAdd + m_nAdd).Find(m_filter) != -1)
				{
					bFinded = 1;
					m_List1.m_arLabels.ElementAt(count++).Copy(m_List1array.ElementAt(ii));
				}
				else
				{
					bFinded = 0;
				}
			}
		}
		else
		{
			BOOL bFinded = 0;
			for (ii = 0; ii < m_List1.m_arLabels.GetSize(); ii++)
			{
				if (bFinded && m_List1array.ElementAt(ii).ElementAt(0 + m_nAdd).IsEmpty())
				{
					m_List1.m_arLabels.ElementAt(count++).Copy(m_List1array.ElementAt(ii));
					continue;
				}

				// 查询条件==订单号、男名、女名、接单人、手机1、手机2、拼音1、拼音2 ;
				if (m_List1array.ElementAt(ii).ElementAt(0).Find(m_filter) != -1
					|| m_List1array.ElementAt(ii).ElementAt(0 + m_nAdd).Find(m_filter) != -1
					|| m_List1array.ElementAt(ii).ElementAt(1 + m_nAdd).Find(m_filter) != -1
					|| m_List1array.ElementAt(ii).ElementAt(2 + m_nAdd).Find(m_filter) != -1
					|| m_List1array.ElementAt(ii).ElementAt(7 + m_nAdd).Find(m_filter) != -1
					|| m_List1array.ElementAt(ii).ElementAt(15 + nAdd + m_nAdd).Find(m_filter) != -1
					|| m_List1array.ElementAt(ii).ElementAt(16 + nAdd + m_nAdd).Find(m_filter) != -1
					|| m_List1array.ElementAt(ii).ElementAt(17 + nAdd + m_nAdd).Find(m_filter) != -1
					|| m_List1array.ElementAt(ii).ElementAt(18 + nAdd + m_nAdd).Find(m_filter) != -1
					)
				{
					bFinded = 1;
					m_List1.m_arLabels.ElementAt(count++).Copy(m_List1array.ElementAt(ii));
				}
				else
				{
					bFinded = 0;
				}
			}
		}
	}
	m_List1.m_arLabels.SetSize(count, 1);
	ii = count;
	m_List1.m_LabelCount = ii;
	m_List1.SetItemCountEx(ii);
	CString str;
	str.Format("单数:%d", ii);
	SetDlgItemText(IDC_STATIC2, str);

	if (!g_id.IsEmpty())
	{
		for (int i = 0; i < m_List1.GetItemCount(); i++)
		{
			if (g_id == m_List1.GetItemText(i, 0 + m_nAdd))
			{
				m_List1.SetItemState(i, LVIS_SELECTED | LVIS_FOCUSED, LVIS_SELECTED | LVIS_FOCUSED);
				m_List1.EnsureVisible(i, FALSE);
				break;
			}
		}
	}
}

void outsourcing::OnBUTclose()
{
	GetParent()->SendMessage(WM_CLOSE);
}

void outsourcing::OnButton1()	// 查询 按钮;
{
	UpdateData();
	m_filter.TrimLeft();
	m_filter.TrimRight();
	FillGrid();
}

void outsourcing::OnSelchangeCombo1()
{
	SetTimer(1, 100, NULL);
}

void outsourcing::OnTimer(UINT nIDEvent)
{
	KillTimer(nIDEvent);
	OnButton1();
}

BOOL outsourcing::PreTranslateMessage(MSG* pMsg)
{
	try
	{
		if (pMsg->message == WM_KEYDOWN)
		{
			switch (pMsg->wParam)
			{
			case VK_RETURN:
				OnButton1();
				return 1;
			case 0x43: // copy
				if ((GetKeyState(VK_CONTROL) & 0x80))
				{
					GetFocus()->SendMessage(WM_COPY);
					return TRUE;
				}
				break;
			case 0x56: //Ctrl + V:
				if ((GetKeyState(VK_CONTROL) & 0x80))
				{
					GetFocus()->SendMessage(WM_PASTE);
					return TRUE;
				}
				break;
			case 0x58: // cut
				if ((GetKeyState(VK_CONTROL) & 0x80))
				{
					GetFocus()->SendMessage(WM_CUT);
					return TRUE;
				}
				break;
			case 0x5A: //undo
			case 0x59: //redo
				if ((GetKeyState(VK_CONTROL) & 0x80))
				{
					GetFocus()->SendMessage(WM_UNDO);
					return TRUE;
				}
				break;
			}
		}
		/*	else if(pMsg->message==WM_LBUTTONDOWN)
		{
		CPoint pt;
		CRect rc,rc2;
		::GetCursorPos (&pt);
		m_List1.GetWindowRect (rc2);
		pt.x-=rc2.left ;
		pt.y-=rc2.top ;
		m_List1.GetHeaderCtrl()->GetItemRect (0, rc);
		rc.right =rc.left +rc2.Width ();
		if(rc.PtInRect (pt))
		return 1;
		}*/
		return MyFormView::PreTranslateMessage(pMsg);
	}
	catch (...)
	{
	}

	return TRUE;
}

//-----------------------------------------------------------------
// remark by Jeff 2014-12-12
// 函数：GetNo
// 描述：从str中解析出每个相片名,然后存入空的CStringArray中;
// 参数：
//		str:选好的相片名串,如："001,002,003" 后分隔符改为"|",结果应是"001|002|003"
//		array:空的数组,用来存放解析后的相片名;
// 返回：
// 注意：更换分隔符造成的问题,在该函数已解决;
//-----------------------------------------------------------------
void outsourcing::GetNo(CString str, CStringArray &array)
{
	if (!str.IsEmpty())
	{
#ifdef USE_SEP_VEB
		int pos = str.Find(SEPS_VEB);
#else
		int pos = str.Find(",");
#endif
		while (pos != -1)
		{
			array.Add(str.Left(pos));
			str = str.Right(str.GetLength() - pos - 1);
#ifdef USE_SEP_VEB
			pos = str.Find(SEPS_VEB);
#else
			pos = str.Find(",");
#endif
		}
		array.Add(str);
	}
}

extern int   CALLBACK   BrowseProc(HWND   hwnd, UINT   msg, LPARAM   lParam, LPARAM   lpData);
/*{
switch(msg)
{
case   BFFM_INITIALIZED:
SendMessage(hwnd,   BFFM_SETSELECTION,   TRUE,   NULL);
break;
case   BFFM_SELCHANGED:
{
char   szFileName[MAX_PATH];
LPITEMIDLIST   pidlCurrent   =   (LPITEMIDLIST)lParam;
SHGetPathFromIDList(pidlCurrent,   szFileName);
SendMessage(hwnd,   BFFM_SETSTATUSTEXT,   0,   (LPARAM)szFileName);
}
break;
}
return   0;
}*/

void outsourcing::GetSavePath(CString &path)
{
	char   lpszDisplayName[MAX_PATH], szFileName[MAX_PATH];
	LPITEMIDLIST   pidlDesktop, pidlCurrent;
	if (SHGetSpecialFolderLocation(NULL, CSIDL_DESKTOP, &pidlDesktop)
		== NOERROR)
	{
		BROWSEINFO   bi;
		bi.hwndOwner = this->m_hWnd;
		bi.pidlRoot = pidlDesktop;
		bi.pszDisplayName = lpszDisplayName;
		bi.lpszTitle = "\n文档保存的目录:";
		bi.ulFlags = BIF_STATUSTEXT&BIF_RETURNONLYFSDIRS;
		bi.lpfn = BrowseProc;
		bi.lParam = 0;
		bi.iImage = 0;
		pidlCurrent = SHBrowseForFolder(&bi);

		SHGetPathFromIDList(pidlCurrent, szFileName);
		path = szFileName;
	}
}

int outsourcing::FindArray(CStringArray *pArray, CString *pStr)
{
	for (int i = 0; i < pArray->GetSize(); i++)
	{
		if (pArray->ElementAt(i) == *pStr)
			return i;
	}
	return -1;
}

void outsourcing::OnDblclkList2(NMHDR* pNMHDR, LRESULT* pResult)
{
	OnBUTmodify();
	*pResult = 0;
}

void outsourcing::OnBUTmodify() // 发件取件资料按钮;
{
	if (IsHasRights2new(13) == 0)return;
	POSITION pos;
	pos = m_List1.GetFirstSelectedItemPosition();
	if (pos == NULL)
	{
		return;
	}
	int iItem = m_List1.GetNextSelectedItem(pos);
	CString branch;
	CString id = m_List1.GetItemText(iItem, 0 + m_nAdd);
	if (g_bAllBranch)
		branch = m_List1.GetItemText(iItem, 0);

	while (id == "")
	{
		iItem--;
		id = m_List1.GetItemText(iItem, 0 + m_nAdd);
	}

	outsourcingDlg dlg;
	dlg.m_branch = branch;
	dlg.m_id = id;
	dlg.m_name1 = m_List1.GetItemText(iItem, 1 + m_nAdd);
	dlg.m_name2 = m_List1.GetItemText(iItem, 2 + m_nAdd);
	if (dlg.DoModal() != IDOK)
		return;

	for (int i = 0; i < m_List1array.GetSize(); i++)
	{
		if (id == m_List1array.ElementAt(i).ElementAt(0 + m_nAdd))
		{
			iItem = i;
			break;
		}
	}

	int pos2;
	CString name;
	int sameproduct = 0;
	if (g_bAllBranch)
	{
		while (branch == m_List1array.ElementAt(iItem).ElementAt(0) && (id == m_List1array.ElementAt(iItem).ElementAt(0 + m_nAdd) || m_List1array.ElementAt(iItem).ElementAt(0 + m_nAdd).IsEmpty()))
		{
			//name=m_List1array.ElementAt (iItem).ElementAt (7+m_nAdd);	// Jeff.
			name = m_List1array.ElementAt(iItem).ElementAt(8 + m_nAdd);
			for (int i = 0; i < dlg.m_sparray.GetSize(); i++)
			{
				if (name == dlg.m_sparray.ElementAt(i).ElementAt(0))
				{
					pos2 = i; 
					sameproduct++;
					//	break;
				}
			}
			if (sameproduct > 1)
			{
				GetData(); 
				FillGrid();
				return;
			}
#if 0
			m_List1array.ElementAt (iItem).SetAt (8+m_nAdd, dlg.m_sparray .ElementAt (pos2).ElementAt(2));
			m_List1array.ElementAt (iItem).SetAt (9+m_nAdd, dlg.m_sparray .ElementAt (pos2).ElementAt(3));
			m_List1array.ElementAt (iItem).SetAt (10+m_nAdd, dlg.m_sparray .ElementAt (pos2).ElementAt(4));
#ifdef LKAY_VERSION
			m_List1array.ElementAt (iItem).SetAt (11, dlg.m_sparray .ElementAt (pos2).ElementAt(23));
			m_List1array.ElementAt (iItem).SetAt (12, dlg.m_sparray .ElementAt (pos2).ElementAt(24));
			m_List1array.ElementAt (iItem).SetAt (13, dlg.m_sparray .ElementAt (pos2).ElementAt(5));
#else
			m_List1array.ElementAt (iItem).SetAt (11+m_nAdd, dlg.m_sparray .ElementAt (pos2).ElementAt(5));
#endif
#else //-----------------------------------------------------------------------------------------------------------
			m_List1array.ElementAt(iItem).SetAt(9 + m_nAdd, dlg.m_sparray.ElementAt(pos2).ElementAt(2));
			m_List1array.ElementAt(iItem).SetAt(10 + m_nAdd, dlg.m_sparray.ElementAt(pos2).ElementAt(3));
			m_List1array.ElementAt(iItem).SetAt(11 + m_nAdd, dlg.m_sparray.ElementAt(pos2).ElementAt(4));
#ifdef LKAY_VERSION
			m_List1array.ElementAt (iItem).SetAt (12, dlg.m_sparray .ElementAt (pos2).ElementAt(23));
			m_List1array.ElementAt (iItem).SetAt (13, dlg.m_sparray .ElementAt (pos2).ElementAt(24));
			m_List1array.ElementAt (iItem).SetAt (14, dlg.m_sparray .ElementAt (pos2).ElementAt(5));
#else
			m_List1array.ElementAt(iItem).SetAt(12 + m_nAdd, dlg.m_sparray.ElementAt(pos2).ElementAt(5));
#endif
#endif
			iItem++;
			if (iItem >= m_List1array.GetSize())break;
		}
	}
	else
	{
		while (id == m_List1array.ElementAt(iItem).ElementAt(0 + m_nAdd) || m_List1array.ElementAt(iItem).ElementAt(0 + m_nAdd).IsEmpty())
		{
			//name=m_List1array.ElementAt (iItem).ElementAt (7+m_nAdd);
			name = m_List1array.ElementAt(iItem).ElementAt(8 + m_nAdd);
			for (int i = 0; i < dlg.m_sparray.GetSize(); i++)
			{
				if (name == dlg.m_sparray.ElementAt(i).ElementAt(0))
				{
					pos2 = i; 
					sameproduct++;
					//	break;
				}
			}
			if (sameproduct > 1)
			{
				GetData(); 
				FillGrid();
				return;
			}
#if 0
			m_List1array.ElementAt (iItem).SetAt (8+m_nAdd, dlg.m_sparray .ElementAt (pos2).ElementAt(2));
			m_List1array.ElementAt (iItem).SetAt (9+m_nAdd, dlg.m_sparray .ElementAt (pos2).ElementAt(3));
			m_List1array.ElementAt (iItem).SetAt (10+m_nAdd, dlg.m_sparray .ElementAt (pos2).ElementAt(4));
#ifdef LKAY_VERSION
			m_List1array.ElementAt (iItem).SetAt (11, dlg.m_sparray .ElementAt (pos2).ElementAt(23));
			m_List1array.ElementAt (iItem).SetAt (12, dlg.m_sparray .ElementAt (pos2).ElementAt(24));
			m_List1array.ElementAt (iItem).SetAt (13, dlg.m_sparray .ElementAt (pos2).ElementAt(5));
#else
			m_List1array.ElementAt (iItem).SetAt (11+m_nAdd, dlg.m_sparray .ElementAt (pos2).ElementAt(5));
#endif
#else		//---------------------------------------------------------------------------------------------
			m_List1array.ElementAt(iItem).SetAt(9 + m_nAdd, dlg.m_sparray.ElementAt(pos2).ElementAt(2));
			m_List1array.ElementAt(iItem).SetAt(10 + m_nAdd, dlg.m_sparray.ElementAt(pos2).ElementAt(3));
			m_List1array.ElementAt(iItem).SetAt(11 + m_nAdd, dlg.m_sparray.ElementAt(pos2).ElementAt(4));
#ifdef LKAY_VERSION
			m_List1array.ElementAt (iItem).SetAt (12, dlg.m_sparray .ElementAt (pos2).ElementAt(23));
			m_List1array.ElementAt (iItem).SetAt (13, dlg.m_sparray .ElementAt (pos2).ElementAt(24));
			m_List1array.ElementAt (iItem).SetAt (14, dlg.m_sparray .ElementAt (pos2).ElementAt(5));
#else
			m_List1array.ElementAt(iItem).SetAt(12 + m_nAdd, dlg.m_sparray.ElementAt(pos2).ElementAt(5));
#endif
#endif
			iItem++;
			if (iItem >= m_List1array.GetSize())break;
		}
	}

	FillGrid();
}

void outsourcing::OnRdblclkList2(NMHDR* pNMHDR, LRESULT* pResult)
{
	OnBUTmodify2();
	*pResult = 0;
}

void outsourcing::OnButton2()	// 查询完成 按钮（查询齐件）
{
	UpdateData();
	m_filter.TrimLeft();
	m_filter.TrimRight();
	FillGrid(1);
}

void outsourcing::OnButton3()	// 近期取件 按钮;
{
	UpdateData();
	m_filter.TrimLeft();
	m_filter.TrimRight();
	FillGrid(2);
}

void outsourcing::OnCustomdrawList(NMHDR* pNMHDR, LRESULT* pResult)
{
	NMLVCUSTOMDRAW* pLVCD = reinterpret_cast<NMLVCUSTOMDRAW*>(pNMHDR);
	*pResult = 0;

	if (CDDS_PREPAINT == pLVCD->nmcd.dwDrawStage)
	{
		*pResult = CDRF_NOTIFYITEMDRAW;
	}
	else if (CDDS_ITEMPREPAINT == pLVCD->nmcd.dwDrawStage)
	{
		COLORREF crText;
		int pos = pLVCD->nmcd.dwItemSpec;
		if (pos % 2)
			pLVCD->clrTextBk = g_gridcol1;
		else
			pLVCD->clrTextBk = g_gridcol2;
		while (m_List1.m_arLabels.ElementAt(pos).ElementAt(0).IsEmpty())
		{
			pos--;
			if (pos < 1)break;
		}

		//if(atoi(m_List1.m_arLabels.ElementAt (pos).ElementAt (18)))
		if (atoi(m_List1.m_arLabels.ElementAt(pos).ElementAt(19)))
			crText = RGB(220, 0, 0);
		else
			crText = RGB(20, 133, 20);

		pLVCD->clrText = crText;

		*pResult = CDRF_DODEFAULT;
	}
}

void outsourcing::OnBUTmodify2()	// 本月出件;
{
	if (IsHasRights2new(13) == 0)return;
	outsourcing2 dlg;
	dlg.DoModal();
}

void outsourcing::OnClickList2(NMHDR* pNMHDR, LRESULT* pResult)
{
	POSITION pos;
	pos = m_List1.GetFirstSelectedItemPosition();
	if (pos == NULL)
	{
		return;
	}
	int iItem = m_List1.GetNextSelectedItem(pos);
	g_id = m_List1.GetItemText(iItem, 0);
	while (g_id == "")
	{
		iItem--;
		g_id = m_List1.GetItemText(iItem, 0 + m_nAdd);
	}
	*pResult = 0;
}

void outsourcing::OnBUTburncd()
{
	outsourcing3 dlg;
	dlg.DoModal();
}


void outsourcing::HidePrice()
{
	if (IsHasRights2new(31))return;
	for (int i = 0; i < m_List1array.GetSize(); i++)
	{
#ifdef LKAY_VERSION
		if(!m_List1array.ElementAt (i).ElementAt (16).IsEmpty ())
			m_List1array.ElementAt (i).SetAt (16, "***");
		if(!m_List1array.ElementAt (i).ElementAt (17).IsEmpty ())
			m_List1array.ElementAt (i).SetAt (17, "***");
#else
		if (!m_List1array.ElementAt(i).ElementAt(15 + m_nAdd).IsEmpty())
			m_List1array.ElementAt(i).SetAt(15 + m_nAdd, "***");

		if (!m_List1array.ElementAt(i).ElementAt(16 + m_nAdd).IsEmpty())
			m_List1array.ElementAt(i).SetAt(16 + m_nAdd, "***");
#endif
	}
}

void outsourcing::OnBUTexport()		// 已完成未组 按钮;
{
	UpdateData();
	m_filter.TrimLeft();
	m_filter.TrimRight();
	FillGrid(3);
}

void outsourcing::OnBUTToPhotoPrint()	// 已组未转 按钮;
{
	UpdateData();
	m_filter.TrimLeft();
	m_filter.TrimRight();
	FillGrid(4);
}

void outsourcing::GetData()
{
	if (g_bAllBranch == 0)
	{
		if (g_bShowOK == 0)
		{
#ifdef LKAY_VERSION
			CString filter="status3='未取' and (dindantype<>'意向客户' or dindantype is null)";
#else
			CString filter = "status3='未取'";
#endif
			g_sendhead.bsql = 0;
			g_sendhead.code[0] = 33;
			g_sendhead.tabcount = 1;
			g_pMainWnd->ProcessChatMessageRequest2(filter); 
			if (g_bSendOK == 0)return;
		}
		else
		{
			g_sendhead.bsql = 0;
			g_sendhead.code[0] = 33;
			g_sendhead.tabcount = 1;
#ifdef LKAY_VERSION	
			CString filter="dindantype<>'意向客户' or dindantype is null";
			g_pMainWnd->ProcessChatMessageRequest2(filter);
#else
			g_pMainWnd->ProcessChatMessageRequest2(1);
#endif
			if (g_bSendOK == 0)return;
		}
		DataToArray(&m_List1array);
	}
	else
	{
		//////////////数据汇总;
		m_List1array.RemoveAll();
		CString branch;
		for (int i = -1; i < g_brancharray.GetSize() - 1; i++)
		{
			if (i != -1)
			{
				branch = g_brancharray.ElementAt(i).ElementAt(0);
				g_branchip = g_brancharray.ElementAt(i).ElementAt(1);
				g_pMainWnd->OnDisconnect();
				g_branchname = branch;
				g_bBranchModify = 1;
			}
			else
				branch = g_brancharray.ElementAt(g_brancharray.GetSize() - 1).ElementAt(0);

			if (g_bShowOK == 0)
			{
				CString filter = "status3='未取'";
				g_sendhead.bsql = 0;
				g_sendhead.code[0] = 33;
				g_sendhead.tabcount = 1;
				g_pMainWnd->ProcessChatMessageRequest2(filter); if (g_bSendOK == 0)continue;
			}
			else
			{
				g_sendhead.bsql = 0;
				g_sendhead.code[0] = 33;
				g_sendhead.tabcount = 1;
				g_pMainWnd->ProcessChatMessageRequest2(1); if (g_bSendOK == 0)continue;
			}
			CArray<CStringArray, CStringArray>List1array;
			DataToArray(&List1array);
			int size = m_List1array.GetSize();
			for (int j = 0; j < List1array.GetSize(); j++)
			{
				size++;
				m_List1array.SetSize(size, 1);
				size--;
				m_List1array.ElementAt(size).Copy(List1array.ElementAt(j));
				m_List1array.ElementAt(size).InsertAt(0, branch);
				size++;
			}
		}
		g_pMainWnd->OnDisconnect();
		g_bBranchModify = 0;
		g_branchip = g_branchname = "";
	}

	HidePrice();
}

void outsourcing::OnBUTburncd2()	// 本月返工;
{
	outsourcing4 dlg;
	dlg.DoModal();
}

void outsourcing::OnBnClickedSendsms()	// 发送短信;
{
	POSITION pos;
	pos = m_List1.GetFirstSelectedItemPosition();	
	if(pos==NULL)
	{
		AfxMessageBox(_T("请先选中您要发送短信的会员!"), MB_ICONINFORMATION);
		return;
	}

	int iItem;	
	CStringArray array;
	while (pos)
	{
		iItem = m_List1.GetNextSelectedItem(pos);
		if(!m_List1.GetItemText(iItem, 15 + m_nAdd).IsEmpty())
			array.Add (m_List1.GetItemText (iItem,  15 + m_nAdd));

		if(!m_List1.GetItemText(iItem, 16 + m_nAdd).IsEmpty())
			array.Add (m_List1.GetItemText (iItem,  16 + m_nAdd));
	}

	SendMsgDlg dlg;
	//dlg.m_mode=1;
	dlg.m_pArray=&array;
	dlg.DoModal();		
}

void outsourcing::OnBnClickedPrintbar()	// 打印条码;
{
	// 1.获取选中行：订单号、顾客名1-2、商品名, 商品AutoId;
	POSITION pos = m_List1.GetFirstSelectedItemPosition();
	if ( pos == NULL )
	{
		AfxMessageBox(_T("未选中任何订单商品!"));
		return;
	}

	INT	nGoodsCount = 0;
	INT nOrderItem = -1;
	INT nSelectedItem = 0;
	INT nItemCount = m_List1.GetItemCount();
	
	while( pos )
	{
		BarInfo tagBarInfo;
		nSelectedItem = m_List1.GetNextSelectedItem(pos);
		if ( m_List1.GetItemText(nSelectedItem, m_nAdd).IsEmpty() )
		{
			if ( nOrderItem == -1 )
			{// 第一个选中项无订单号;// 向上查找订单号;
				nOrderItem = nSelectedItem;
				while( nOrderItem-- )
				{
					if ( !m_List1.GetItemText(nOrderItem, m_nAdd).IsEmpty() )
						break;
				}
			}
		}
		else
		{
			nOrderItem = nSelectedItem;
		}

		tagBarInfo.strOrderNum = m_List1.GetItemText(nOrderItem, m_nAdd);
		tagBarInfo.strCustomer1 = m_List1.GetItemText(nOrderItem, 1 + m_nAdd);
		tagBarInfo.strCustomer2 = m_List1.GetItemText(nOrderItem, 2 + m_nAdd);
		tagBarInfo.strProduct = m_List1.GetItemText(nSelectedItem, 8 + m_nAdd);
		tagBarInfo.strAutoId = m_List1.m_arLabels.ElementAt(nSelectedItem).ElementAt(20);
		
		// 商品有多少个，就打印多少个; Q1:打印过的,是否不允再打印;
		nGoodsCount = atoi(m_List1.m_arLabels.ElementAt(nSelectedItem).ElementAt(21));
		for (int i = 0; i < nGoodsCount; i++)
			m_vtBarInfo.push_back(tagBarInfo);

		printf(_T("#####\n\t订单号：%s\n\t顾客1：%s\n\t顾客2：%s\n\t商品：%s\n\tAutoId:%s\n#####\n\n"), 
			tagBarInfo.strOrderNum, 
			tagBarInfo.strCustomer1, 
			tagBarInfo.strCustomer2, 
			tagBarInfo.strProduct, 
			tagBarInfo.strAutoId);
	}

	// 开始打印;
	CPrintRX pter;
	pter.InitToPrint();
	pter.StartPrint();
	vector<BarInfo>::iterator it = m_vtBarInfo.begin();
	for ( ; it != m_vtBarInfo.end(); it++ )
	{
		pter.StartPage();
		pter.DrawBarCode(it->strOrderNum, it->strCustomer1, it->strCustomer2, it->strProduct, it->strAutoId);
		pter.EndPage();
	}
	pter.EndPrint();

	// 打印结束后,清空;
	m_vtBarInfo.clear();
}

void outsourcing::OnBnClickedScanbackitem()	// 扫描回件;
{
	CDlgScanBarCode dlg;
	dlg.m_nScanMode = 0;
	dlg.DoModal();
}

void outsourcing::OnBnClickedScanpickup()	// 扫描取件;
{
	CDlgScanBarCode dlg;
	dlg.m_nScanMode = 1;
	dlg.DoModal();
}