lyfz_repos/经典版源码/lyfzClient/trunk/3.0.0.0/CutPhoto.cpp

// CutPhoto.cpp : implementation file
//

#include "stdafx.h"
#include "ylgl.h"
#include "CutPhoto.h"
#include "SetSize.h"
#include "ShowCut.h"
#ifdef _DEBUG
#define new DEBUG_NEW
#undef THIS_FILE
static char THIS_FILE[] = __FILE__;
#endif

/////////////////////////////////////////////////////////////////////////////
// CutPhoto dialog
CutPhoto::CutPhoto(CWnd* pParent /*=NULL*/): CDialog(CutPhoto::IDD, pParent)
{
	m_pImg = NULL;
	m_width = 0;
	m_height = 0;
	m_fscale = 1.0;
	m_slider1 = 0;
	m_fZoomScale = 0.0;
}

void CutPhoto::DoDataExchange(CDataExchange* pDX)
{
	CDialog::DoDataExchange(pDX);
	DDX_Control(pDX, IDC_SLIDER1, m_sliderctrl);
	DDX_Control(pDX, IDC_COMBO1, m_combo1);
	DDX_Slider(pDX, IDC_SLIDER1, m_slider1);
}

BEGIN_MESSAGE_MAP(CutPhoto, CDialog)
	ON_WM_PAINT()
	ON_BN_CLICKED(IDC_BUTTON7, OnButton7)
	ON_CBN_SELCHANGE(IDC_COMBO1, OnSelchangeCombo1)
	ON_BN_CLICKED(IDC_BUTTON1, OnButton1)
	ON_BN_CLICKED(IDC_BUTTON2, OnButton2)
	ON_BN_CLICKED(IDC_BUTTON3, OnButton3)
	ON_BN_CLICKED(IDC_BUTTON4, OnButton4)
	ON_BN_CLICKED(IDC_BUTTON5, OnButton5)
	ON_BN_CLICKED(IDC_BUTTON6, OnButton6)
	ON_BN_CLICKED(IDC_BUTTON10, OnButton10)
	ON_BN_CLICKED(IDC_BUTTON32, OnButton32)
	ON_NOTIFY(NM_CUSTOMDRAW, IDC_SLIDER1, OnCustomdrawSlider1)
	ON_NOTIFY(NM_OUTOFMEMORY, IDC_SLIDER1, OnOutofmemorySlider1)
	ON_NOTIFY(NM_RELEASEDCAPTURE, IDC_SLIDER1, OnReleasedcaptureSlider1)
	ON_WM_MOUSEWHEEL()
	ON_WM_LBUTTONUP()
	ON_WM_LBUTTONDOWN()
END_MESSAGE_MAP()

BOOL CutPhoto::OnInitDialog()
{
	CDialog::OnInitDialog();

	g_sendhead.bsql = 0;
	g_sendhead.code[0] = 11;
	g_sendhead.code[1] = 174;
	g_sendhead.tabcount = 2;
	CString filter = "id='" + m_strOrderNumber + "';";
	g_pMainWnd->ProcessChatMessageRequest2(filter);
	if (g_bSendOK == 0)
	{
		CDialog::OnCancel();
		return 0;
	}
	CArray<CStringArray, CStringArray>m_List1array;
	DataToArray(&m_List1array, &g_List1array);
	CenterWindow();
	if (m_List1array.GetSize())m_size = m_List1array.ElementAt(0).ElementAt(60);

	m_sliderctrl.SetRange(0, 50);

	m_combo1.ResetContent();
	namearray.RemoveAll();
	widtharray.RemoveAll();
	heightarray.RemoveAll();
	for (int i = 0; i < g_List1array.GetSize(); i++)
	{
		namearray.Add(g_List1array.ElementAt(i).ElementAt(0));
		widtharray.Add(atoi(g_List1array.ElementAt(i).ElementAt(1)));
		heightarray.Add(atoi(g_List1array.ElementAt(i).ElementAt(2)));
		CString str;
		str.Format(_T("%s 宽:%d 高:%d"), g_List1array.ElementAt(i).ElementAt(0), atoi(g_List1array.ElementAt(i).ElementAt(1)), atoi(g_List1array.ElementAt(i).ElementAt(2)));
		m_combo1.AddString(str);
	}
#if JEFF_TEST_ON
	GetDlgItem(IDC_STATIC1)->GetWindowRect(m_rcStatc1);
	ScreenToClient(m_rcStatc1);

	GetDlgItem(IDC_STATIC2)->GetWindowRect(m_rcStatc2);
	ScreenToClient(m_rcStatc2);
#endif
	if (m_combo1.GetCount())
	{
		m_combo1.SetCurSel(0); 
		OnSelchangeCombo1();
	}

	return TRUE;
}

#if JEFF_TEST_ON
//--------------------------------------------------------------------------------------------
// Add by Jeff 2014.11.12
// 函数：
// 描述：获取缩放比例;
// 参数：
//		nSrcImgWidth:原图宽;
//		nSrcImgHeight:原图高;
//		rcImgDisplay:显示图片的缩放区域,也是要重新按缩放比例调整位置的区域;
// 返回：返回缩放比例;
//--------------------------------------------------------------------------------------------
float GetZoomScale(IN const int &nSrcImgWidth,IN const int &nSrcImgHeight,IN OUT CRect &rcImgDisplay)
{
	float fZoomScale = 0.0;
	float fWidthZoom = 0.0;
	float fHeightZoom = 0.0;

	fWidthZoom = (float)nSrcImgWidth / rcImgDisplay.Width();
	fHeightZoom = (float)nSrcImgHeight / rcImgDisplay.Height();

	int nDifferValue = 0; //相差值;
	fZoomScale = (fWidthZoom > fHeightZoom) ? fWidthZoom : fHeightZoom;

	if (fWidthZoom > fHeightZoom)	// rcImgDisplay 宽不变,重新计算缩放高度值;
	{
		// 显示区域原高 - 缩放后的高 = 差值;
		nDifferValue = (rcImgDisplay.Height() - nSrcImgHeight / fZoomScale) / 2;
		rcImgDisplay.top += nDifferValue;
		rcImgDisplay.bottom -= nDifferValue;
	}
	else	// rcImgDisplay 高不变,重新计算缩放宽值;
	{
		// 显示区域原宽 - 缩放后的宽 = 差值;
		nDifferValue = (rcImgDisplay.Width() - nSrcImgWidth / fZoomScale) / 2;
		rcImgDisplay.left += nDifferValue;
		rcImgDisplay.right -= nDifferValue;
	}

	return fZoomScale;
}
#endif

void CutPhoto::OnPaint()
{
	CPaintDC dc(this); // device context for painting
#if JEFF_TEST_ON
	if ( m_width && m_height )
	{
		// 先绘制裁剪区域---------------------------------------------------------------------------------------------------------
		Graphics graph(dc.GetSafeHdc());

		// 1.创建LinearGradientBrush（渐变画刷），主要功能是使用线性渐变绘制区域。
		LinearGradientBrush linGrBrush(
			Point(0, 0),
			Point(1.44*max(m_rcShowCutImage.Width(), m_rcShowCutImage.Height()), 1.44*max(m_rcShowCutImage.Width(), m_rcShowCutImage.Height())),
			Color(255, 255, 250, 156),   // opaque blue
			Color(255, 176, 125, 44));  // opaque green

		// 2.用渐变画刷填充缩放区域;
		graph.FillRectangle(&linGrBrush, m_rcShowCutImage.left, m_rcShowCutImage.top, m_rcShowCutImage.Width(), m_rcShowCutImage.Height());

		// 3.DeflateRect通过将CRect的边向其中心移动来缩小它。
		m_rcShowCutImage.DeflateRect(m_slider1, m_slider1, m_slider1, m_slider1);

		// 4.rcCutting通过GetZoomScale计算后,在原图中的实际裁剪坐标;也是要保存的坐标值
		CRect rcCutting(0, 0, m_pImg->GetWidth(), m_pImg->GetHeight());
		GetZoomScale(m_rcShowCutImage.Width(), m_rcShowCutImage.Height(), rcCutting);

		m_photorcbak = rcCutting;
		if (m_rcRealCuttingArea.right == 0)	// m_photorc为裁剪尺寸;
			m_rcRealCuttingArea = rcCutting;
		else
			rcCutting = m_rcRealCuttingArea;

		graph.DrawImage(m_pImg, Rect(m_rcShowCutImage.left, m_rcShowCutImage.top, m_rcShowCutImage.Width(), m_rcShowCutImage.Height()), rcCutting.left, rcCutting.top, rcCutting.Width(), rcCutting.Height(), UnitPixel);

		// Draw3dRect:调用该成员函数绘制三维矩形。该矩形的顶部、左侧颜色由clrTopLeft指定，底部和右侧颜色由clrBottomRight指定。
		if (m_slider1 == 0)
			dc.Draw3dRect(m_rcShowCutImage, RGB(255, 0, 0), RGB(255, 0, 0));

		// 绘制小图区域---------------------------------------------------------------------------------------------------------
		graph.DrawImage(m_pImg, Rect(m_rtSmall.left,m_rtSmall.top,m_rtSmall.Width(),m_rtSmall.Height()), 0, 0, m_pImg->GetWidth(), m_pImg->GetHeight(), UnitPixel);

		// 将rcCutting映射到小图上,需要用到小图到大图的缩放比例值fZoomScale;
		rcCutting.left = m_rcRealCuttingArea.left / m_fZoomScale + m_rtSmall.left;
		rcCutting.top = m_rcRealCuttingArea.top / m_fZoomScale + m_rtSmall.top;
		rcCutting.right = rcCutting.left + m_rcRealCuttingArea.Width() / m_fZoomScale;
		rcCutting.bottom = rcCutting.top + m_rcRealCuttingArea.Height() / m_fZoomScale;
		
		dc.Draw3dRect(rcCutting, RGB(0, 0, 255), RGB(0, 0, 255));
	}
#else
	if (m_width && m_height)
	{
		// 1.获取控件客户区域,并从屏幕坐标转化客户坐标;
		CRect rc;
		GetDlgItem(IDC_STATIC1)->GetWindowRect(rc);
		ScreenToClient(rc);
		m_rcShowCutImage = rc;

		// 2.计算控件客户区域与原图片大小的缩放比例值,从而得出一个按比例缩放的CRect对象;
		RectFitDes(m_width, m_height, m_rcShowCutImage);
		Graphics graph(dc.GetSafeHdc());

		// 3.创建LinearGradientBrush（渐变画刷），主要功能是使用线性渐变绘制区域。
		LinearGradientBrush linGrBrush(
			Point(0, 0),
			Point(1.44*max(m_rcShowCutImage.Width(), m_rcShowCutImage.Height()), 1.44*max(m_rcShowCutImage.Width(), m_rcShowCutImage.Height())),
			Color(255, 255, 250, 156),   // opaque blue
			Color(255, 176, 125, 44));  // opaque green

		// 4.用渐变画刷填充缩放区域;
		graph.FillRectangle(&linGrBrush, m_rcShowCutImage.left, m_rcShowCutImage.top, m_rcShowCutImage.Width(), m_rcShowCutImage.Height());

		// 5.DeflateRect通过将CRect的边向其中心移动来缩小它。
		// 为了做到这一点，DeflateRect将单位数增加到矩形的左边和上边，从右边和下边减去单位数。
		// DeflateRect的参数是有符号的值；正值缩小CRect，而负值则放大它。
		//	dc.FillSolidRect (m_paintrc, RGB(234,208,98));
		m_rcShowCutImage.DeflateRect(m_slider1, m_slider1, m_slider1, m_slider1);
		rc = m_rcShowCutImage;		// 保存缩小后的缩放区域;

		// 6.使用小图(m_pImg是"s"小图)生成一个CRect区域对象,与缩放区域做参数计算出小图合适的缩放区域;
		CRect rc2(0, 0, m_pImg->GetWidth(), m_pImg->GetHeight());
		RectFitDes(rc.Width(), rc.Height(), rc2); 
		m_photorcbak = rc2;
		if (m_rcRealCuttingArea.right == 0)	// m_photorc为裁剪尺寸;
		{
			m_rcRealCuttingArea = rc2;
		}
		else
		{
			rc2 = m_rcRealCuttingArea;
		}

		// 这里m_pImg又疑为大图,而非小图;
		Rect destinationRect(rc.left, rc.top, rc.Width(), rc.Height());
		graph.DrawImage(m_pImg, destinationRect, rc2.left, rc2.top, rc2.Width(), rc2.Height(), UnitPixel);

		// Draw3dRect:调用该成员函数绘制三维矩形。该矩形的顶部、左侧颜色由clrTopLeft指定，底部和右侧颜色由clrBottomRight指定。
		if (m_slider1 == 0)
			dc.Draw3dRect(m_rcShowCutImage, RGB(255, 0, 0), RGB(255, 0, 0));

		///////////////////
		{
			// 获取左上角小区域的显示效果;
			GetDlgItem(IDC_STATIC2)->GetWindowRect(rc);
			ScreenToClient(rc);

			RectFitDes(m_pImg->GetWidth(), m_pImg->GetHeight(), rc);
			Rect destinationRect(rc.left, rc.top, rc.Width(), rc.Height());
			graph.DrawImage(m_pImg, destinationRect, 0, 0, m_pImg->GetWidth(), m_pImg->GetHeight(), UnitPixel);
			float scale = (float)rc.Width() / (float)m_pImg->GetWidth();

			rc2.left *= scale;
			rc2.right *= scale;
			rc2.top *= scale;
			rc2.bottom *= scale;

			rc2.left += rc.left;
			rc2.right += rc.left;
			rc2.top += rc.top;
			rc2.bottom += rc.top;
			dc.Draw3dRect(rc2, RGB(255, 0, 0), RGB(255, 0, 0));
		}
	}
#endif
	// Do not call CDialog::OnPaint() for painting messages
}

void CutPhoto::OnButton7()	// 设置按钮;
{
	SetSize dlg;
	dlg.DoModal(); 
	GetSize();
}

void CutPhoto::GetSize()
{
	g_sendhead.bsql = 0;
	g_sendhead.code[0] = 174;
	g_sendhead.tabcount = 1;
	g_pMainWnd->ProcessChatMessageRequest2(6);
	if (g_bSendOK == 0)
	{
		return;
	}
	DataToArray(&g_List1array);
	CenterWindow();
	m_combo1.ResetContent();
	namearray.RemoveAll();
	widtharray.RemoveAll();
	heightarray.RemoveAll();
	for (int i = 0; i < g_List1array.GetSize(); i++)
	{
		namearray.Add(g_List1array.ElementAt(i).ElementAt(0));
		widtharray.Add(atoi(g_List1array.ElementAt(i).ElementAt(1)));
		heightarray.Add(atoi(g_List1array.ElementAt(i).ElementAt(2)));
		CString str;
		str.Format(_T("%s 宽:%d 高:%d"), g_List1array.ElementAt(i).ElementAt(0), atoi(g_List1array.ElementAt(i).ElementAt(1)), atoi(g_List1array.ElementAt(i).ElementAt(2)));
		m_combo1.AddString(str);
	}
	if (m_combo1.GetCount())
	{
		m_combo1.SetCurSel(0); 
		OnSelchangeCombo1();
	}
}

void CutPhoto::OnSelchangeCombo1()
{
	int pos = m_combo1.GetCurSel();
	if (pos == -1)return;

	m_rcRealCuttingArea.right = 0;

	m_fscale = 1.0;
	m_width = widtharray.ElementAt(pos);		// 裁剪方案 宽值;
	m_height = heightarray.ElementAt(pos);		// 裁剪方案 高值;
	m_name = namearray.ElementAt(pos);			// 裁剪方案 名称;

	CString header = m_strImgName + ":" + m_name + ",";
	pos = m_size.Find(header);

	if (pos != -1)
	{
		CString str = m_size.Right(m_size.GetLength() - pos);
		CString size = str.Left(str.Find(";"));
		int pos = size.Find(":");
		if (pos != -1)
		{
			CRect rc, rc2;
			str = size.Left(pos);
			str = size.Right(size.GetLength() - pos - 1);
			pos = str.Find(",");
			str.Delete(0, pos + 1);

			// rc原图
			pos = str.Find(",");
			rc.left = atoi(str.Left(pos)); str.Delete(0, pos + 1);

			pos = str.Find(",");
			rc.top = atoi(str.Left(pos)); str.Delete(0, pos + 1);

			// rc2实际裁剪区域;
			pos = str.Find(",");
			rc2.left = atoi(str.Left(pos)); str.Delete(0, pos + 1);
			pos = str.Find(",");
			rc2.top = atoi(str.Left(pos)); str.Delete(0, pos + 1);
			pos = str.Find(",");
			rc2.right = atoi(str.Left(pos)); str.Delete(0, pos + 1);
			rc2.bottom = atoi(str);

#if JEFF_TEST_ON
			//CRect rc;
			//GetDlgItem(IDC_STATIC1)->GetWindowRect(rc);
			//ScreenToClient(rc);
			//GetZoomScale(m_width,m_height,rc);
			//GetZoomScale(m_width,m_height,rc2);
#else
			// 小图宽 / 原图宽 = 缩放比例;
			float scale = (float)m_pImg->GetWidth() / (float)rc.left;

			// rc2为实际裁剪区域;
			rc2.left *= scale;
			rc2.right *= scale;
			rc2.top *= scale;
			rc2.bottom *= scale;
			m_rcRealCuttingArea = rc2;
#endif
		}
	}

#if JEFF_TEST_ON
	m_rtSmall = m_rcStatc2;
	m_rcShowCutImage = m_rcStatc1;
	GetZoomScale(m_width, m_height, m_rcShowCutImage);
	m_fZoomScale = GetZoomScale(m_pImg->GetWidth(), m_pImg->GetHeight(), m_rtSmall);
#endif

	RefreshRc();
}

void CutPhoto::OnButton1()		// 放大按钮;应该以矩形中心点向外;
{
#if JEFF_TEST_OFF
#if 0
	// 正切值;
	float fTanx = m_rcRealCuttingArea.Width() / m_rcRealCuttingArea.Height();
	float lhOffSet = 5.0;	// 水平移动的像素;
	// 根据fTanx值计算出垂直移动的像素;
	float lvOffSet = lhOffSet / fTanx;

	RectF rcTemp(m_rcRealCuttingArea.left,m_rcRealCuttingArea.top,m_rcRealCuttingArea.Width(),m_rcRealCuttingArea.Height());
	if (rcTemp.GetRight() == 0)return;

	rcTemp.X += lhOffSet;
	rcTemp.Width -= lhOffSet*2;

	rcTemp.Y += lvOffSet;
	rcTemp.Height -= lvOffSet*2;

	//if ((rcTemp.X + rcTemp.Width >= m_pImg->GetWidth()) || (m_pImg->GetHeight() <= rcTemp.Y+rcTemp.Height) || rcTemp.X <= 0 || rcTemp.Y <= 0)
	//if (rcTemp.X >= (rcTemp.X+rcTemp.Width))
	if (0)
	{
		AfxMessageBox("亲，已放最大啦~");
		return;
	}
	else
	{
		m_rcRealCuttingArea.left = rcTemp.X;
		m_rcRealCuttingArea.top = rcTemp.Y;
		m_rcRealCuttingArea.right = m_rcRealCuttingArea.left + rcTemp.Width;
		m_rcRealCuttingArea.bottom = m_rcRealCuttingArea.top + rcTemp.Height;

		//m_rcRealCuttingArea.SetRect(rcTemp.GetLeft(),rcTemp.GetTop(),rcTemp.GetRight(),rcTemp.GetBottom());
	}
#else
	// 正切值;
	float fTanx = m_rcRealCuttingArea.Width() / m_rcRealCuttingArea.Height();
	LONG lhOffSet = 2;	// 水平移动的像素;
	// 根据fTanx值计算出垂直移动的像素;
	LONG lvOffSet = lhOffSet/fTanx;

	CRect rcTemp = m_rcRealCuttingArea;
	if (rcTemp.right == 0)return;

	rcTemp.left += lhOffSet;
	rcTemp.right -= lhOffSet;

	rcTemp.top += lvOffSet;
	rcTemp.bottom -= lvOffSet;

	if ( fTanx >= 1) // 纵向;
	{
		lvOffSet = 2;
		lhOffSet = lvOffSet*fTanx;

		if ( rcTemp.Width() <= lhOffSet)
		{
			AfxMessageBox("已放最大");
		}
		else
		{
			m_rcRealCuttingArea = rcTemp;
		}
	}
	else // 横向;
	{
		lhOffSet = 2;
		lvOffSet = lhOffSet / fTanx;

		if (rcTemp.Height() <= lvOffSet)
		{
			AfxMessageBox("已放最大");
		}
		else
		{
			m_rcRealCuttingArea = rcTemp;
		}
		
	}
#endif
#else
#if 1
	CRect rcTemp = m_rcRealCuttingArea;

	if (rcTemp.right == 0)return;
	float fScale = 1.05;	// 1.2
	int dt = rcTemp.Width() - rcTemp.Width() / fScale;
	dt /= 2;
	rcTemp.left += dt;
	rcTemp.right -= dt;
	if (rcTemp.left < 0)rcTemp.left = 0;
	if (rcTemp.right > m_photorcbak.right)rcTemp.right = m_photorcbak.right;

	dt = rcTemp.Height() - rcTemp.Height() / fScale;
	dt /= 2;
	rcTemp.top += dt;
	rcTemp.bottom = rcTemp.top + rcTemp.Width()*m_photorcbak.Height() / m_photorcbak.Width();

	if (rcTemp.top < 0)rcTemp.top = 0;
	if (rcTemp.bottom > m_photorcbak.bottom)rcTemp.bottom = m_photorcbak.bottom;

	if ((rcTemp.Width() >= m_pImg->GetWidth()) || (m_pImg->GetHeight() <= rcTemp.Height()))
	{
		//AfxMessageBox("亲，已放最大啦~");
		return;
	}
	else
	{
		m_rcRealCuttingArea = rcTemp;
	}
#else
	if (m_rcRealCuttingArea.right == 0)return;
	float fScale = 1.2;	// 1.2
	int dt = m_rcRealCuttingArea.Width() - m_rcRealCuttingArea.Width() / fScale;
	dt /= 2;
	m_rcRealCuttingArea.left += dt;
	m_rcRealCuttingArea.right -= dt;
	if (m_rcRealCuttingArea.left < 0)m_rcRealCuttingArea.left = 0;
	if (m_rcRealCuttingArea.right > m_photorcbak.right)m_rcRealCuttingArea.right = m_photorcbak.right;

	dt = m_rcRealCuttingArea.Height() - m_rcRealCuttingArea.Height() / fScale;
	dt /= 2;
	m_rcRealCuttingArea.top += dt;
	m_rcRealCuttingArea.bottom = m_rcRealCuttingArea.top + m_rcRealCuttingArea.Width()*m_photorcbak.Height() / m_photorcbak.Width();

	if (m_rcRealCuttingArea.top < 0)m_rcRealCuttingArea.top = 0;
	if (m_rcRealCuttingArea.bottom > m_photorcbak.bottom)m_rcRealCuttingArea.bottom = m_photorcbak.bottom;
#endif
#endif
	RefreshRc();
}

void CutPhoto::OnButton2()	// 缩小按钮 - 缩小到一定程序，禁止缩小，否则会变形;
{
#if JEFF_TEST_OFF // 这里控制会产生错误;
#if 1
	// 正切值;
	float fTanx = m_rcRealCuttingArea.Width() / m_rcRealCuttingArea.Height();
	float lhOffSet = 5.0;	// 水平移动的像素;
	// 根据fTanx值计算出垂直移动的像素;
	float lvOffSet = lhOffSet / fTanx;

	RectF rcTemp(m_rcRealCuttingArea.left, m_rcRealCuttingArea.top, m_rcRealCuttingArea.Width(), m_rcRealCuttingArea.Height());
	if (rcTemp.GetRight() == 0)return;

	rcTemp.X -= lhOffSet;
	rcTemp.Width += lhOffSet*2;

	rcTemp.Y -= lvOffSet;
	rcTemp.Height += lvOffSet*2;

	if ((rcTemp.X + rcTemp.Width >= m_pImg->GetWidth()) || (m_pImg->GetHeight() <= rcTemp.Y + rcTemp.Height) || rcTemp.X <= 0 || rcTemp.Y <= 0)
	{
		AfxMessageBox("亲，已最小啦~");
		return;
	}
	else
	{
		m_rcRealCuttingArea.left = rcTemp.GetLeft();
		m_rcRealCuttingArea.top = rcTemp.GetTop();
		m_rcRealCuttingArea.right = rcTemp.GetRight();
		m_rcRealCuttingArea.bottom = rcTemp.GetBottom();

		//m_rcRealCuttingArea.SetRect(rcTemp.GetLeft(),rcTemp.GetTop(),rcTemp.GetRight(),rcTemp.GetBottom());
	}
#else
	// 正切值;
	float fTanx = m_rcRealCuttingArea.Width() / m_rcRealCuttingArea.Height();
	LONG lhOffSet = 5;	// 水平移动的像素;
	// 根据fTanx值计算出垂直移动的像素;
	LONG lvOffSet = lhOffSet/fTanx;

	CRect rcTemp = m_rcRealCuttingArea;
	if (rcTemp.right == 0)return;

	rcTemp.left -= lhOffSet;
	rcTemp.right += lhOffSet;

	rcTemp.top -= lvOffSet;
	rcTemp.bottom += lvOffSet;

	if ((rcTemp.right >= m_pImg->GetWidth()) || (m_pImg->GetHeight() <= rcTemp.bottom) || rcTemp.left <= 0 || rcTemp.top <= 0 )
	{
		AfxMessageBox("亲，已最小啦~");
		return;
	}
	else
	{
		m_rcRealCuttingArea = rcTemp;
	}
#endif
#else
#if 1
	CRect rcTemp = m_rcRealCuttingArea;
	if (rcTemp.right == 0)return;

	float fScale = 0.95;
	int dt = rcTemp.Width() - rcTemp.Width()*fScale;
	dt /= 2;
	rcTemp.left -= dt;
	rcTemp.right += dt;
	if (rcTemp.left < 0)rcTemp.left = 0;
	if (rcTemp.right > m_photorcbak.right)rcTemp.right = m_photorcbak.right;

	dt = rcTemp.Height() - rcTemp.Height()*fScale;
	dt /= 2;
	rcTemp.top -= dt;
	rcTemp.bottom = rcTemp.top + rcTemp.Width()*m_photorcbak.Height() / m_photorcbak.Width();
	if (rcTemp.top < 0)rcTemp.top = 0;
	if (rcTemp.bottom > m_photorcbak.bottom)rcTemp.bottom = m_photorcbak.bottom;

	if ((rcTemp.Width() >= m_pImg->GetWidth()) || (m_pImg->GetHeight() <= rcTemp.Height()))
	{
		//AfxMessageBox("亲，已最小啦~");
		return;
	}
	else
	{
		m_rcRealCuttingArea = rcTemp;
	}
#else
	if (m_rcRealCuttingArea.right == 0)return;
	int dt = m_rcRealCuttingArea.Width() - m_rcRealCuttingArea.Width()*0.8;
	dt /= 2;
	m_rcRealCuttingArea.left -= dt;
	m_rcRealCuttingArea.right += dt;
	if (m_rcRealCuttingArea.left < 0)m_rcRealCuttingArea.left = 0;
	if (m_rcRealCuttingArea.right > m_photorcbak.right)m_rcRealCuttingArea.right = m_photorcbak.right;

	dt = m_rcRealCuttingArea.Height() - m_rcRealCuttingArea.Height()*0.8;
	dt /= 2;
	m_rcRealCuttingArea.top -= dt;
	m_rcRealCuttingArea.bottom = m_rcRealCuttingArea.top + m_rcRealCuttingArea.Width()*m_photorcbak.Height() / m_photorcbak.Width();
	if (m_rcRealCuttingArea.top < 0)m_rcRealCuttingArea.top = 0;
	if (m_rcRealCuttingArea.bottom > m_photorcbak.bottom)m_rcRealCuttingArea.bottom = m_photorcbak.bottom;
#endif
#endif
	RefreshRc();
}

void CutPhoto::OnButton3()	// 左 按钮;
{
	if (m_rcRealCuttingArea.right == 0)return;
	int dt = m_photorcbak.Width() / 50; if (dt<1)dt = 1;

	if ((m_rcRealCuttingArea.right + dt)>(m_pImg->GetWidth() - 1))
		dt = m_pImg->GetWidth() - m_rcRealCuttingArea.right - 1;

	m_rcRealCuttingArea.left += dt;
	m_rcRealCuttingArea.right += dt;

	RefreshRc();
}

void CutPhoto::OnButton4()	// 右按钮;
{
	if (m_rcRealCuttingArea.right == 0)return;
	int dt = m_photorcbak.Width() / 50; if (dt < 1)dt = 1;

	if ((m_rcRealCuttingArea.left - dt) < 0)
		dt = m_rcRealCuttingArea.left;

	m_rcRealCuttingArea.left -= dt;
	m_rcRealCuttingArea.right -= dt;

	RefreshRc();
}

void CutPhoto::OnButton5()	// 上 按钮;
{
	if (m_rcRealCuttingArea.right == 0)return;
	int dt = m_photorcbak.Height() / 50; if (dt<1)dt = 1;

	if ((m_rcRealCuttingArea.bottom + dt)>(m_pImg->GetHeight() - 1))
		dt = m_pImg->GetHeight() - m_rcRealCuttingArea.bottom - 1;

	m_rcRealCuttingArea.top += dt;
	m_rcRealCuttingArea.bottom += dt;

	RefreshRc();
}

void CutPhoto::OnButton6()	// 下 按钮;
{
	if (m_rcRealCuttingArea.right == 0)return;
	int dt = m_photorcbak.Height() / 50; if (dt < 1)dt = 1;

	if ((m_rcRealCuttingArea.top - dt) < 0)
		dt = m_rcRealCuttingArea.top;

	m_rcRealCuttingArea.top -= dt;
	m_rcRealCuttingArea.bottom -= dt;

	RefreshRc();
}

void CutPhoto::RefreshRc()
{
	UpdateData();
	CRect rc;
	GetDlgItem(IDC_STATIC1)->GetWindowRect(rc);
	ScreenToClient(rc);
	InvalidateRect(rc);

	GetDlgItem(IDC_STATIC2)->GetWindowRect(rc);
	ScreenToClient(rc);
	InvalidateRect(rc);
}

void CutPhoto::OnButton10()		// 保存按钮;
{
	if (!(m_width && m_height))
	{
		AfxMessageBox("请选择尺寸!");
		return;
	}
	CString str;
	str.Format("%s:%s,%d,%d,%d,%d,%d,%d;", m_strImgName, m_name, m_pImg->GetWidth(), m_pImg->GetHeight(), m_rcRealCuttingArea.left, m_rcRealCuttingArea.top, m_rcRealCuttingArea.right, m_rcRealCuttingArea.bottom);

	int pos;
	CString header = m_strImgName + ":" + m_name + ",";
	pos = m_size.Find(header);
	if (pos != -1)
	{
		CString left, right;
		left = m_size.Left(pos);
		m_size = m_size.Right(m_size.GetLength() - pos - header.GetLength());
		pos = m_size.Find(";");
		right = m_size.Right(m_size.GetLength() - pos - 1);
		m_size = left + right;
	}
	m_size += str;

	CString sql;
	sql.Format("update dindan set size='%s' where id='%s'", m_size, m_strOrderNumber);
	g_sendhead.bsql = 1;
	g_pMainWnd->ProcessChatMessageRequest2(sql); 
	if (g_bSendOK == 0)return;
	AfxMessageBox("保存成功!");
	//	CDialog::OnCancel ();
}

void CutPhoto::OnButton32()		// 查看剪裁按钮;
{
	ShowCut dlg;
	dlg.m_id = m_strOrderNumber;
	dlg.DoModal();

	g_sendhead.bsql = 0;
	g_sendhead.code[0] = 11;
	g_sendhead.tabcount = 1;
	CString filter = "id='" + m_strOrderNumber + "';";
	g_pMainWnd->ProcessChatMessageRequest2(filter);
	if (g_bSendOK == 0)
	{
		CDialog::OnCancel();
		return;
	}
	CArray<CStringArray, CStringArray>m_List1array;
	DataToArray(&m_List1array);
	CenterWindow();

	if (m_List1array.GetSize())
	{
		m_size = m_List1array.ElementAt(0).ElementAt(60);
	}
}

void CutPhoto::OnCustomdrawSlider1(NMHDR* pNMHDR, LRESULT* pResult)
{
	*pResult = 0;
}

void CutPhoto::OnOutofmemorySlider1(NMHDR* pNMHDR, LRESULT* pResult)
{
	*pResult = 0;
}

void CutPhoto::OnReleasedcaptureSlider1(NMHDR* pNMHDR, LRESULT* pResult)
{
	RefreshRc();
	*pResult = 0;
}

BOOL CutPhoto::OnMouseWheel(UINT nFlags, short zDelta, CPoint pt)
{
	//-----------------------------------------------------------------------------------------
	// 1.判断鼠标是否在客户区域内,不在退出;
	// 2.获取客户区域，进而计算出中心点Center(x,y).
	// 3.若鼠标滚轮向下,以中心点为轴心缩小操作,缩放尺寸为1个像素点,定义宏#define ZOOMSIZE 1L;
	// 4.若鼠标滚轮向上,以中心点为轴心放大操作,缩放尺寸为1个像素点,定义宏#define ZOOMSIZE 1L;
	//-----------------------------------------------------------------------------------------
	ScreenToClient(&pt);
	if (m_rcShowCutImage.PtInRect(pt) == TRUE)
	{
		if ( zDelta > 0)
		{
			OnButton1();
		}
		else
		{
			OnButton2();
		}
	}

	return CDialog::OnMouseWheel(nFlags, zDelta, pt);
}

void CutPhoto::OnLButtonUp(UINT nFlags, CPoint point)
{
	//ScreenToClient(&point);
	if (m_rcShowCutImage.PtInRect(point) == TRUE)
	{
		if (GetCapture() != this)
			return;
		ReleaseCapture();

		int a = abs(point.x - m_ptStart.x);
		int b = abs(point.y - m_ptStart.y);
		float tanX = 0.0;
		if (b != 0)
			tanX = a / b;
		// 求两点的正切值，对照正切表判断点区域;
		if ( point.x > m_ptStart.x && point.y <= m_ptStart.y)	// point在m_ptStart的右上角;
		{
			if (b == 0)
			{
				OnButton4();
			}
			else
			{
				if (tanX < 1)
				{
					OnButton4();	// 右移;
				}
				else if (tanX >= 1)
				{
					OnButton5();	// 上移;
				}
			}
		}
		else if ( point.x <= m_ptStart.x && point.y < m_ptStart.y)	// point在m_ptStart的左上角;
		{
			if (b == 0)
			{
				OnButton3();
			}
			else
			{
				if (tanX < 1)
				{
					OnButton5();	// 上移;
				}
				else if (tanX >= 1)
				{
					OnButton3();	// 左移;
				}
			}
		}
		else if ( point.x < m_ptStart.x && point.y >= m_ptStart.y )	// point在m_ptStart的左下角;
		{
			if (b == 0)
			{
				OnButton3();
			}
			else
			{
				if (tanX < 1)
				{
					OnButton6();	// 下移;
				}
				else if (tanX >= 1)
				{
					OnButton3();	// 左移;
				}
			}
		}
		else if ( point.x >= m_ptStart.x && point.y > m_ptStart.y)	// point在m_ptStart的右下角;
		{
			if (b == 0)
			{
				OnButton4();
			}
			else
			{
				if (tanX < 1)
				{
					OnButton6();	// 下移;
				}
				else if (tanX >= 1)
				{
					OnButton4();	// 右移;
				}
			}
		}
	}

	CDialog::OnLButtonUp(nFlags, point);
}

void CutPhoto::OnLButtonDown(UINT nFlags, CPoint point)
{
	//ScreenToClient(&point);
	if (m_rcShowCutImage.PtInRect(point) == TRUE)
	{
		GetDlgItem(IDC_STATIC1)->SetFocus();
		//AfxMessageBox(_T("按下在区域内"));
		SetCapture();
		m_ptStart = point;
	}

	CDialog::OnLButtonDown(nFlags, point);
}