lyfz_repos/经典版源码/lyfzInternalClient/trunk/InternalClient/DesignFrom.cpp

// DesignFrom.cpp : implementation file
//
#include "stdafx.h"
#include "ylgl.h"
#include "DesignFrom.h"
#include "MyMdi.H"
#include "ModifyDinDan.h"
#include "InputPsw.h"
#include "TakeMoney2.h"
#include "ImportPhoto.h"
#include "ClientRequirement.h"
#include "ChoosePhotoSkin2.h"
#include "./helper/ffsco.h"
#include "SelectPhotoDlg.h"
#include "ShowPic.h"
#include "Login2.h"
#include "ShowCut.h"
#include "CompressOption.h"
#ifdef _DEBUG
#define new DEBUG_NEW
#undef THIS_FILE
static char THIS_FILE[] = __FILE__;
#endif
#pragma comment(lib, "Shlwapi.lib")

IMPLEMENT_DYNCREATE(DesignFrom, MyFormView)
DesignFrom::DesignFrom() : MyFormView(DesignFrom::IDD)
{
	m_filter = _T("");
	m_nAdd = 0;

	if (g_bAllBranch)
	{
		m_nAdd = 1;
	}
}

DesignFrom::~DesignFrom()
{
}

void DesignFrom::DoDataExchange(CDataExchange* pDX)
{
	MyFormView::DoDataExchange(pDX);
	DDX_Control(pDX, IDC_COMBO1, m_combo1);
	DDX_Control(pDX, IDC_LIST2, m_List1);
	DDX_Control(pDX, IDC_STATIC1, m_static1);
	DDX_CBString(pDX, IDC_COMBO1, m_filter);
}

BEGIN_MESSAGE_MAP(DesignFrom, MyFormView)
	ON_BN_CLICKED(IDC_BUTclose, OnBUTclose)
	ON_BN_CLICKED(IDC_BUTTON1, OnButton1)
	ON_CBN_SELCHANGE(IDC_COMBO1, OnSelchangeCombo1)
	ON_WM_TIMER()
	ON_BN_CLICKED(IDC_BUTshowphoto, OnBUTshowphoto)
	ON_BN_CLICKED(IDC_BUTexportphoto, OnBUTexportphoto)
	ON_BN_CLICKED(IDC_BUTimportphoto, OnBUTimportphoto)
	ON_BN_CLICKED(IDC_BUTTON2, OnButton2)
	ON_NOTIFY(LVN_ITEMCHANGED, IDC_LIST2, OnItemchangedList2)
	ON_BN_CLICKED(IDC_BUTimportphoto2, OnBUTimportphoto2)
	ON_BN_CLICKED(IDC_BUTimportphoto3, OnBUTimportphoto3)
	ON_NOTIFY(NM_CLICK, IDC_LIST2, OnClickList2)
	ON_BN_CLICKED(IDC_BUTTON3, OnButton3)
	ON_BN_CLICKED(IDC_BTNSEARCHFILTER, OnBtnsearchfilter)
	ON_BN_CLICKED(IDC_BUTprint3, OnBUTprint3)
END_MESSAGE_MAP()


#ifdef _DEBUG
void DesignFrom::AssertValid() const
{
	MyFormView::AssertValid();
}

void DesignFrom::Dump(CDumpContext& dc) const
{
	MyFormView::Dump(dc);
}
#endif //_DEBUG

/////////////////////////////////////////////////////////////////////////////

void DesignFrom::OnInitialUpdate()
{
	MyFormView::OnInitialUpdate();

	CMyMdi Mdi;
	Mdi.SetSubView((CWnd*)GetParent(), (CWnd*)this);
	GetDlgItem(IDC_BUTimportphoto3)->EnableWindow(IsHasRights2new(12));
	GetDlgItem(IDC_BUTTON3)->EnableWindow(IsHasRights2new(12));

	GetDlgItem(IDC_BUTshowphoto)->EnableWindow(IsHasRights2new(15));

	CRect rc2;
	GetWindowRect(rc2);
	::MoveWindow(m_hWnd, g_rc.left, g_rc.top, g_rc.Width(), g_rc.Height(), TRUE);
	EnumChildWindows(m_hWnd, (WNDENUMPROC)EnumChildProc, 0);

	if (g_bAllBranch == 0)
	{
		int idarray[] = { IDC_BUTexportphoto, IDC_BUTimportphoto, IDC_BUTimportphoto2, IDC_BUTimportphoto3, IDC_BUTshowphoto, IDC_BUTTON3, IDC_BUTclose };
		int idcount = 7;
		int btnwid;
		CRect prerc;
		for (int a = idcount - 2; a >= 0; a--)
		{
			GetDlgItem(idarray[a + 1])->GetWindowRect(prerc);
			ScreenToClient(prerc);
			GetDlgItem(idarray[a])->GetWindowRect(rc2);
			ScreenToClient(rc2);
			btnwid = rc2.Width();
			rc2.right = prerc.left;
			rc2.left = rc2.right - btnwid;
			GetDlgItem(idarray[a])->MoveWindow(rc2);
		}
	}
	else
	{
		GetDlgItem(IDC_BUTshowphoto)->ShowWindow(0);
		GetDlgItem(IDC_BUTprint3)->ShowWindow(1);
		int idarray[] = { IDC_BUTprint3, IDC_BUTexportphoto, IDC_BUTimportphoto, IDC_BUTimportphoto2, IDC_BUTimportphoto3, IDC_BUTTON3, IDC_BUTclose };
		int idcount = 7;
		int btnwid;
		CRect prerc;
		for (int a = idcount - 2; a >= 0; a--)
		{
			GetDlgItem(idarray[a + 1])->GetWindowRect(prerc);
			ScreenToClient(prerc);
			GetDlgItem(idarray[a])->GetWindowRect(rc2);
			ScreenToClient(rc2);
			btnwid = rc2.Width();
			rc2.right = prerc.left;
			rc2.left = rc2.right - btnwid;
			GetDlgItem(idarray[a])->MoveWindow(rc2);
		}
	}

	m_static1.SetFont(&g_titlefont);

	// Jeff.在精修状态后添加精修日期;
	if (g_bAllBranch == 0)
	{
#ifdef CHILD_VERSION
		// 19 列;
		m_List1.SetHeadings("订单号,100;家长姓名,100;宝宝姓名,100;精修,100;精修日期,100;设计,100;设计日期,100;看设计,100;看设计日期,100;加急,100;取件日期,100;看设计要求,100;接单人,100;看设计人,100;设计师,100;套系名称,100;套系价格,100;手机,100;固定电话,100");
#else
		// 19 列;
		m_List1.SetHeadings("订单号,100;男宾姓名,100;女宾姓名,100;精修,100;精修日期,100;设计,100;设计日期,100;看设计,100;看设计日期,100;加急,100;取件日期,100;看设计要求,100;接单人,100;看设计人,100;设计师,100;套系名称,100;套系价格,100;男宾电话,100;女宾电话,100");
#endif
		m_List1.LoadColumnInfo(119);
	}
	else
	{
#ifdef CHILD_VERSION
		// 20 列;
		m_List1.SetHeadings("店名,100;订单号,100;家长姓名,100;宝宝姓名,100;精修,100;精修日期,100;设计,100;设计日期,100;看设计,100;看设计日期,100;加急,100;取件日期,100;看设计要求,100;接单人,100;看设计人,100;设计师,100;套系名称,100;套系价格,100;手机,100;固定电话,100");
#else
		m_List1.SetHeadings("店名,100;订单号,100;男宾姓名,100;女宾姓名,100;精修,100;精修日期,100;设计,100;设计日期,100;看设计,100;看设计日期,100;加急,100;取件日期,100;看设计要求,100;接单人,100;看设计人,100;设计师,100;套系名称,100;套系价格,100;男宾电话,100;女宾电话,100");
#endif
		m_List1.LoadColumnInfo(199);
	}

	GetData();

	m_combo1.AddString(g_user.name);
	m_combo1.GetWindowRect(rc2);
	ScreenToClient(rc2);
	rc2.bottom += 200;
	m_combo1.MoveWindow(rc2);
	GetDlgItem(IDC_BUTclose)->GetWindowRect(rc2);
	SetComboHei(&m_combo1, rc2.Height());
	GetDlgItem(IDC_BUTexportphoto)->EnableWindow(IsHasRights2new(11));
}

void DesignFrom::FillGrid(BOOL bStatus)
{
	if (g_bSearchFilter)	// 开启条件查询;
	{
		m_List1.DeleteAllItems2();
		int ii = 0;
		m_List1.m_arLabels.SetSize(m_List1array.GetSize(), 1);
		int count = 0;
		{
			for (ii = 0; ii < m_List1.m_arLabels.GetSize(); ii++)
			{
				if (g_filterdate1 != "")
				{
					// 查询条件==设计日期; 原本在列5
					if (m_List1array.ElementAt(ii).ElementAt(6 + m_nAdd) <= g_filterdate1 || m_List1array.ElementAt(ii).ElementAt(6 + m_nAdd) >= g_filterdate2)
						continue;
				}
				if (g_waiter1 != "")
				{
					// 查询条件==设计师; 原本在列13
					if (m_List1array.ElementAt(ii).ElementAt(14 + m_nAdd) != g_waiter1)
						continue;
				}
				if (g_bAllBranch && g_filterbranch != "")
				{
					if (m_List1array.ElementAt(ii).ElementAt(0) != g_filterbranch)
						continue;
				}

				m_List1.m_arLabels.ElementAt(count++).Copy(m_List1array.ElementAt(ii));
			}
		}
		m_List1.m_arLabels.SetSize(count, 1);
		ii = count;
		m_List1.m_LabelCount = ii;
		m_List1.SetItemCountEx(ii);
		CString str;
		str.Format("单数:%d", ii);
		SetDlgItemText(IDC_STATIC2, str);
	}
	else	// 未开启条件查询;
	{
		m_List1.DeleteAllItems2();
		int ii = 0;
		m_List1.m_arLabels.SetSize(m_List1array.GetSize(), 1);
		int count = 0;
		if (m_filter.IsEmpty())
		{
			if (bStatus)
			{
				for (ii = 0; ii < m_List1.m_arLabels.GetSize(); ii++)
				{
					// 查询条件==精修状态&&设计状态（原本列4）;
					if (m_List1array.ElementAt(ii).ElementAt(3 + m_nAdd) == "OK" && m_List1array.ElementAt(ii).ElementAt(5 + m_nAdd) != "OK")
					{
						m_List1.m_arLabels.ElementAt(count++).Copy(m_List1array.ElementAt(ii));
					}
				}
			}
			else
			{
				for (ii = 0; ii < m_List1.m_arLabels.GetSize(); ii++)
				{
					m_List1.m_arLabels.ElementAt(count++).Copy(m_List1array.ElementAt(ii));
				}
			}
		}
		else
		{
			if (bStatus)
			{
				int type = GetType(m_filter);
				if (type == 1)//电话
				{
					for (ii = 0; ii < m_List1.m_arLabels.GetSize(); ii++)
					{
						// 查询条件==精修状态&&设计状态 &&（手机（原列16）||座机（原列17））
						if (m_List1array.ElementAt(ii).ElementAt(3 + m_nAdd) == "OK" &&
							m_List1array.ElementAt(ii).ElementAt(5 + m_nAdd) != "OK" &&
							(m_List1array.ElementAt(ii).ElementAt(17 + m_nAdd).Find(m_filter) != -1 || m_List1array.ElementAt(ii).ElementAt(18 + m_nAdd).Find(m_filter) != -1))
						{
							m_List1.m_arLabels.ElementAt(count++).Copy(m_List1array.ElementAt(ii));
						}
					}
				}
				else if (type == 2)//拼音
				{
					m_filter.MakeUpper();
					for (ii = 0; ii < m_List1.m_arLabels.GetSize(); ii++)
					{
						// 查询条件==精修状态&&设计状态 &&（拼音1（原列18）||拼音2（原列19））
						if (m_List1array.ElementAt(ii).ElementAt(3 + m_nAdd) == "OK"
							&&m_List1array.ElementAt(ii).ElementAt(5 + m_nAdd) != "OK"
							&& (m_List1array.ElementAt(ii).ElementAt(19 + m_nAdd).Find(m_filter) != -1 || m_List1array.ElementAt(ii).ElementAt(20 + m_nAdd).Find(m_filter) != -1))
						{
							m_List1.m_arLabels.ElementAt(count++).Copy(m_List1array.ElementAt(ii));
						}
					}
				}
				else
				{
					for (ii = 0; ii < m_List1.m_arLabels.GetSize(); ii++)
					{
						// 查询条件==精修状态&&设计状态 &&（……）
						if (m_List1array.ElementAt(ii).ElementAt(3 + m_nAdd) == "OK" &&
							m_List1array.ElementAt(ii).ElementAt(5 + m_nAdd) != "OK" &&
							(m_List1array.ElementAt(ii).ElementAt(0).Find(m_filter) != -1 || \
							m_List1array.ElementAt(ii).ElementAt(1).Find(m_filter) != -1 || \
							m_List1array.ElementAt(ii).ElementAt(2).Find(m_filter) != -1 || \
							m_List1array.ElementAt(ii).ElementAt(3).Find(m_filter) != -1 || \
							m_List1array.ElementAt(ii).ElementAt(12).Find(m_filter) != -1 || \
							m_List1array.ElementAt(ii).ElementAt(13).Find(m_filter) != -1 || \
							m_List1array.ElementAt(ii).ElementAt(14).Find(m_filter) != -1 || \
							m_List1array.ElementAt(ii).ElementAt(15).Find(m_filter) != -1 || \
							m_List1array.ElementAt(ii).ElementAt(16).Find(m_filter) != -1 || \
							m_List1array.ElementAt(ii).ElementAt(17).Find(m_filter) != -1 || \
							m_List1array.ElementAt(ii).ElementAt(18).Find(m_filter) != -1 || \
							m_List1array.ElementAt(ii).ElementAt(19).Find(m_filter) != -1))
						{
							m_List1.m_arLabels.ElementAt(count++).Copy(m_List1array.ElementAt(ii));
						}
					}
				}
			}
			else
			{
				int type = GetType(m_filter);
				if (type == 1)//电话
				{
					for (ii = 0; ii < m_List1.m_arLabels.GetSize(); ii++)
					{
						// 查询条件==手机（原列16）||座机（原列17）
						if (m_List1array.ElementAt(ii).ElementAt(17 + m_nAdd).Find(m_filter) != -1 ||
							m_List1array.ElementAt(ii).ElementAt(18 + m_nAdd).Find(m_filter) != -1)
						{
							m_List1.m_arLabels.ElementAt(count++).Copy(m_List1array.ElementAt(ii));
						}
					}
				}
				else if (type == 2)//拼音
				{
					m_filter.MakeUpper();
					for (ii = 0; ii < m_List1.m_arLabels.GetSize(); ii++)
					{
						// 查询条件==精拼音1（原列18）||拼音2（原列19）
						if (m_List1array.ElementAt(ii).ElementAt(19 + m_nAdd).Find(m_filter) != -1 ||
							m_List1array.ElementAt(ii).ElementAt(20 + m_nAdd).Find(m_filter) != -1)
						{
							m_List1.m_arLabels.ElementAt(count++).Copy(m_List1array.ElementAt(ii));
						}
					}
				}
				else
				{
					for (ii = 0; ii < m_List1.m_arLabels.GetSize(); ii++)
					{
						if (m_List1array.ElementAt(ii).ElementAt(0).Find(m_filter) != -1 ||
							m_List1array.ElementAt(ii).ElementAt(1).Find(m_filter) != -1 ||
							m_List1array.ElementAt(ii).ElementAt(2).Find(m_filter) != -1 ||
							m_List1array.ElementAt(ii).ElementAt(3).Find(m_filter) != -1 ||
							m_List1array.ElementAt(ii).ElementAt(12).Find(m_filter) != -1 ||
							m_List1array.ElementAt(ii).ElementAt(13).Find(m_filter) != -1 ||
							m_List1array.ElementAt(ii).ElementAt(14).Find(m_filter) != -1 ||
							m_List1array.ElementAt(ii).ElementAt(15).Find(m_filter) != -1 ||
							m_List1array.ElementAt(ii).ElementAt(16).Find(m_filter) != -1 ||
							m_List1array.ElementAt(ii).ElementAt(17).Find(m_filter) != -1 ||
							m_List1array.ElementAt(ii).ElementAt(18).Find(m_filter) != -1 ||
							m_List1array.ElementAt(ii).ElementAt(19).Find(m_filter) != -1)
						{
							m_List1.m_arLabels.ElementAt(count++).Copy(m_List1array.ElementAt(ii));
						}
					}
				}
			}
		}

		m_List1.m_arLabels.SetSize(count, 1);
		ii = count;
		m_List1.m_LabelCount = ii;
		m_List1.SetItemCountEx(ii);
		CString str;
		str.Format("单数:%d", ii);
		SetDlgItemText(IDC_STATIC2, str);
	}

	if (!g_id.IsEmpty())
	{
		for (int i = 0; i < m_List1.GetItemCount(); i++)
		{
			if (g_id == m_List1.GetItemText(i, 0 + m_nAdd))
			{
				m_List1.SetItemState(i, LVIS_SELECTED | LVIS_FOCUSED, LVIS_SELECTED | LVIS_FOCUSED);
				m_List1.EnsureVisible(i, FALSE);
				break;
			}
		}
	}
}

void DesignFrom::OnBUTclose()
{
	GetParent()->SendMessage(WM_CLOSE);
}

void DesignFrom::OnSelchangeCombo1()
{
	SetTimer(1, 100, NULL);
}

void DesignFrom::OnTimer(UINT nIDEvent)
{
	KillTimer(nIDEvent);
	OnButton1();
}

BOOL DesignFrom::PreTranslateMessage(MSG* pMsg)
{
	try
	{
		if (pMsg->message == WM_KEYDOWN)
		{
			switch (pMsg->wParam)
			{
			case VK_RETURN:
				OnButton1();
				return 1;
			case 0x43: // copy
				if ((GetKeyState(VK_CONTROL) & 0x80))
				{
					GetFocus()->SendMessage(WM_COPY);
					return TRUE;
				}
				break;
			case 0x56: //Ctrl + V:
				if ((GetKeyState(VK_CONTROL) & 0x80))
				{
					GetFocus()->SendMessage(WM_PASTE);
					return TRUE;
				}
				break;
			case 0x58: // cut
				if ((GetKeyState(VK_CONTROL) & 0x80))
				{
					GetFocus()->SendMessage(WM_CUT);
					return TRUE;
				}
				break;
			case 0x5A: //undo
			case 0x59: //redo
				if ((GetKeyState(VK_CONTROL) & 0x80))
				{
					GetFocus()->SendMessage(WM_UNDO);
					return TRUE;
				}
				break;
			}
		}
		else if (pMsg->message == WM_LBUTTONDBLCLK)
		{
			CPoint pt;
			CRect rc, rc2;
			::GetCursorPos(&pt);
			m_List1.GetWindowRect(rc2);
			if (rc2.PtInRect(pt) == 0)
				return MyFormView::PreTranslateMessage(pMsg);
			pt.x -= rc2.left;
			pt.y -= rc2.top;
			POSITION pos;
			pos = m_List1.GetFirstSelectedItemPosition();
			if (pos == NULL)return MyFormView::PreTranslateMessage(pMsg);
			int iItem = m_List1.GetNextSelectedItem(pos);
			m_List1.GetSubItemRect(iItem, 11 + m_nAdd, LVIR_BOUNDS, rc);
			if (rc.PtInRect(pt))
			{
				CClientRequirement dlg;
				CString id = m_List1.GetItemText(iItem, 0 + m_nAdd);
				CString str;

				if (g_bAllBranch == 0)
				{
					for (int i = 0; i < m_List1arraybak.GetSize(); i++)
					{
						if (m_List1arraybak.ElementAt(i).ElementAt(0 + m_nAdd) == id)
						{
							str = m_List1arraybak.ElementAt(i).ElementAt(11 + m_nAdd);
							break;
						}
					}
				}
				else
				{
					CString branch = m_List1.GetItemText(iItem, 0);
					for (int i = 0; i < m_List1arraybak.GetSize(); i++)
					{
						if (m_List1arraybak.ElementAt(i).ElementAt(0 + m_nAdd) == id && branch == m_List1array.ElementAt(i).ElementAt(0))
						{
							str = m_List1arraybak.ElementAt(i).ElementAt(11 + m_nAdd);
							break;
						}
					}
				}

				dlg.m_bz2 = str;
				dlg.m_bSave = 0;
				dlg.DoModal();
			}
		}
		return MyFormView::PreTranslateMessage(pMsg);
	}
	catch (...)
	{
	}
}

extern int   CALLBACK   BrowseProc(HWND   hwnd, UINT   msg, LPARAM   lParam, LPARAM   lpData);
/*{
switch(msg)
{
case   BFFM_INITIALIZED:
SendMessage(hwnd,   BFFM_SETSELECTION,   TRUE,   NULL);
break;
case   BFFM_SELCHANGED:
{
char   szFileName[MAX_PATH];
LPITEMIDLIST   pidlCurrent   =   (LPITEMIDLIST)lParam;
SHGetPathFromIDList(pidlCurrent,   szFileName);
SendMessage(hwnd,   BFFM_SETSTATUSTEXT,   0,   (LPARAM)szFileName);
}
break;
}
return   0;
}*/

void DesignFrom::GetSavePath(CString &path)
{
	char   lpszDisplayName[MAX_PATH], szFileName[MAX_PATH];
	LPITEMIDLIST   pidlDesktop, pidlCurrent;
	if (SHGetSpecialFolderLocation(NULL, CSIDL_DESKTOP, &pidlDesktop) == NOERROR)
	{
		BROWSEINFO   bi;
		bi.hwndOwner = this->m_hWnd;
		bi.pidlRoot = pidlDesktop;
		bi.pszDisplayName = lpszDisplayName;
		bi.lpszTitle = "\n文档保存的目录:";
		bi.ulFlags = BIF_STATUSTEXT&BIF_RETURNONLYFSDIRS;
		bi.lpfn = BrowseProc;
		bi.lParam = 0;
		bi.iImage = 0;
		pidlCurrent = SHBrowseForFolder(&bi);

		SHGetPathFromIDList(pidlCurrent, szFileName);
		path = szFileName;
	}
}

int DesignFrom::FindArray(CStringArray *pArray, CString Str)
{
	for (int i = 0; i < pArray->GetSize(); i++)
	{
		if (pArray->ElementAt(i) == Str)
			return i;
	}
	return -1;
}

//-----------------------------------------------------------------
// remark by Jeff 2014-12-12
// 函数：GetNo
// 描述：从str中解析出每个相片名,然后存入空的CStringArray中;
// 参数：
//		str:选好的相片名串,如："001,002,003" 后分隔符改为"|",结果应是"001|002|003"
//		array:空的数组,用来存放解析后的相片名;
// 返回：
// 注意：更换分隔符造成的问题,在该函数已解决;
//-----------------------------------------------------------------
void DesignFrom::GetNo(CString str, CStringArray &array)
{
	if (!str.IsEmpty())
	{
		int pos = str.Find(",");
		while (pos != -1)
		{
			if (FindArray(&array, str.Left(pos)) == -1)
				array.Add(str.Left(pos));
			str = str.Right(str.GetLength() - pos - 1);
			pos = str.Find(",");
		}
		if (FindArray(&array, str) == -1)
			array.Add(str);
	}
}

//-----------------------------------------------------------------
// remark by Jeff 2014-12-12
// 函数：GetSelName
// 描述：
// 参数：
//		name:由GetNo解析出来后的单个相片名,如："001"
//		spnamearray:订单下的商品数组,case 50所得;
// 返回：
// 注意：更换分隔符造成的问题,在该函数已解决;
//-----------------------------------------------------------------
CString DesignFrom::GetSelName(CString name, CArray<CStringArray, CStringArray>&spnamearray)
{
	CString ret;
	name = "," + name + ",";
	CString str;
	for (int i = 0; i < spnamearray.GetSize(); i++)
	{
		str = "," + spnamearray.ElementAt(i).ElementAt(6) + ",";
		if (str.Find(name) != -1)
		{
			ret += spnamearray.ElementAt(i).ElementAt(5);
			ret += ";";
		}
	}
	ret.TrimRight(";");
	ret.Replace("*", "x");
	return ret;
}

//-----------------------------------------------------------------
// remark by Jeff 2014-12-12
// 函数：GetSelName2
// 描述：
// 参数：
//		name:由GetNo解析出来后的单个相片名,如："001"
//		spnamearray:订单下的商品数组,case 50所得;
// 返回：
// 注意：更换分隔符造成的问题,在该函数已解决;
//-----------------------------------------------------------------
CString DesignFrom::GetSelName2(CString name, CArray<CStringArray, CStringArray>&spnamearray)
{
	CString ret;
	name = "," + name + ",";
	CString str;
	for (int i = 0; i < spnamearray.GetSize(); i++)
	{
		str = "," + spnamearray.ElementAt(i).ElementAt(8) + ",";
		if (str.Find(name) != -1)
		{
			ret += spnamearray.ElementAt(i).ElementAt(5);
			ret += ";";
		}
	}
	ret.TrimRight(";");
	ret.Replace("*", "x");
	return ret;
}

void DesignFrom::OnBUTexportphoto()		// 导出精修好的片 按钮;
{
	if (IsHasRights2new(11) == 0)return;

	POSITION pos;
	pos = m_List1.GetFirstSelectedItemPosition();
	if (pos == NULL)
	{
		AfxMessageBox("请先选中您要导出片的定单!", MB_ICONINFORMATION);
		return;
	}
	int iItem = m_List1.GetNextSelectedItem(pos);
	CString id = m_List1.GetItemText(iItem, 0 + m_nAdd);
	CString branch;
	if (g_bAllBranch)
		branch = m_List1.GetItemText(iItem, 0);
	CString path;
	if (g_bAllBranch)
	{
		CString branchpath = GetBranchPhotoPath(branch);
		path = g_path4 + branchpath + "\\";
	}
	else
		path = g_path4 + "\\";

	path += id;
	path += "\\";

	CStringArray array;

	CString dir;
	GetSavePath(dir);
	if (dir.IsEmpty())
	{
		return;
	}
	CString name1 = m_List1.GetItemText(iItem, 1 + m_nAdd);
	CString name2 = m_List1.GetItemText(iItem, 2 + m_nAdd);
	dir.TrimRight('\\');
	dir += "\\";
	dir += id;
	dir += g_branchname;
	if (g_bAllBranch)
	{
		if (GetBranchPhotoPath(branch) != "")
			dir += branch;
	}
	dir += name1;
	dir += name2;
	dir += "精修好的片";
	dir += "\\";
	::CreateDirectory(dir, NULL);


	CStringArray desarray;
	CStringArray dirarray;

	CString savepath = dir;
	CString str;
	if (1)
	{
		using namespace helper_coffs;
		ffsco o;
		o.dirs(1);
		o.find(LPCSTR(path), LPCSTR("*.*"));
		ffsco::typeT coo;
		ffsco::typeT::iterator it;
		coo = o.co_dir();
		for (it = coo.begin(); coo.end() != it; it++)
		{
			str = (*it).c_str();
			if (FindArray(&dirarray, str) == -1)
			{
				dirarray.Add(str);
				if (str != dirarray.ElementAt(0))
				{
					str = savepath + str.Right(str.GetLength() - dirarray.ElementAt(0).GetLength());
					if (::CheckFolderFileExist(str) == 0)
						::CreateDirectory(str, NULL);
				}
			}
		}
	}
	if (1)
	{
		for (int i = 0; i < dirarray.GetSize(); i++)
		{
			using namespace helper_coffs;
			ffsco o;
			o.dirs(0);
			o.find(LPCSTR(dirarray.ElementAt(i)), LPCSTR("*.jpg"));
			ffsco::typeT coo;
			ffsco::typeT::iterator it;
			coo = o.co_file();
			for (it = coo.begin(); coo.end() != it; it++)
			{
				str = (*it).c_str();
				if (str.GetAt(str.ReverseFind('\\') + 1) == 's')continue;
				if (str.GetAt(str.ReverseFind('\\') + 1) == 'm')continue;
				array.Add(str);
				desarray.Add(savepath + dirarray.ElementAt(i).Right(dirarray.ElementAt(i).GetLength() - dirarray.ElementAt(0).GetLength()) + str.Right(str.GetLength() - str.ReverseFind('\\') - 1));
			}
		}
	}

	if (array.GetSize() == 0)
	{
		AfxMessageBox("此单未导片!", MB_ICONINFORMATION);
		return;
	}

	CCompressOption comoptdlg;
	comoptdlg.DoModal();

	//----------------------------------------------------------------------------------------------
	//----------------------------------------------------------------------------------------------
	// 导出精修好片;
	//----------------------------------------------------------------------------------------------
	//----------------------------------------------------------------------------------------------
	ImportPhoto dlg;
	dlg.m_nOutputSize = comoptdlg.m_nsize;	// 1.导出精修片时的尺寸;
	dlg.m_mode = 1;							// 2.未知;
	dlg.m_pArray = &array;					// 3.作为导出源的精修片路径集合;
	dlg.m_pDesArray = &desarray;			// 4.作为导出目标的精修片路径集合;
	dlg.m_savepath = dir;					// 5.保存导出精修片的目录;
	dlg.DoModal();
	AfxMessageBox("导片成功!", MB_ICONINFORMATION);

	//	CString str;
	str = " 导出精修片 ";
	str += "客人:";
	str += name1 + name2 + id;

	WriteLog(_T("普通日志"), _T("导出精修片"), g_user.name, str);
	{
		ShowCut dlg;
		dlg.m_branch = branch;
		dlg.m_mode = 1;
		dlg.m_id = id;
		dlg.DoModal();
	}
}

void DesignFrom::OnBUTimportphoto()		// 导入设计版 按钮;
{
	POSITION pos;
	pos = m_List1.GetFirstSelectedItemPosition();
	if (pos == NULL)
	{
		AfxMessageBox("请先选中您要导片的定单!", MB_ICONINFORMATION);
		return;
	}
	int iItem = m_List1.GetNextSelectedItem(pos);
	CString branch;
	CString id = m_List1.GetItemText(iItem, 0 + m_nAdd);
	if (g_bAllBranch)
		branch = m_List1.GetItemText(iItem, 0);

	// 原本4，5,改为5，6
	CString oldstatus = m_List1.GetItemText(iItem, 5 + m_nAdd);
	CString time10 = m_List1.GetItemText(iItem, 6 + m_nAdd);

	CString name = m_List1.GetItemText(iItem, 1 + m_nAdd) + "," + m_List1.GetItemText(iItem, 2 + m_nAdd);
	name.TrimLeft(",");
	name.TrimRight(",");
	name = "客人:" + name;
	CString phone = m_List1.GetItemText(iItem, 16 + m_nAdd) + "," + m_List1.GetItemText(iItem, 17 + m_nAdd);
	phone.TrimLeft(",");
	phone.TrimRight(",");
	phone = "电话:" + phone;

#ifdef ENTERPRISE_VERSION
	if (::CheckFolderFileExist(g_path3) == 0)
		::CreateDirectory(g_path3, NULL);
#endif

	if (!::CheckFolderFileExist(g_path3))
	{
		AfxMessageBox("设计片保存机器目录未设置, 请通知系统管理员!", MB_ICONINFORMATION);
		return;
	}
	CString savepath;
	if (g_bAllBranch)
	{
		CString branchpath = GetBranchPhotoPath(branch);
		savepath = g_path3 + branchpath + "\\";
		if (::CheckFolderFileExist(savepath) == 0)
			::CreateDirectory(savepath, NULL);
	}
	else
		savepath = g_path3 + "\\";

	savepath += id + "\\";
	if (::CheckFolderFileExist(savepath) == 0)
		::CreateDirectory(savepath, NULL);
	/*	IsGrowthTx growthtxdlg;
	growthtxdlg.m_id=id;
	growthtxdlg.DoModal ();
	if(growthtxdlg.m_bReturnOK==0)
	return;
	if(growthtxdlg.m_bGrowthTx && growthtxdlg.m_seltxname.IsEmpty ())
	return;
	if(!growthtxdlg.m_seltxname.IsEmpty ())
	{
	savepath+=growthtxdlg.m_seltxname+"\\";
	if(::CheckFolderFileExist (savepath)==0)
	::CreateDirectory (savepath, NULL);
	}*/

	CString srcdir; CString str;
	GetSavePath(srcdir);

	if (srcdir.IsEmpty())
	{
		CString status5;
		if (AfxMessageBox("客照是否全部设计完毕?", MB_YESNO | MB_ICONINFORMATION) == IDYES)
			status5 = "OK";
		else
			status5 = "设计中";
		CString sql;


		if (time10.IsEmpty())
			sql = "update dindan set status5='" + status5 + "',time10='" + g_date + "' where id='" + id + "'";
		else
			sql = "update dindan set status5='" + status5 + "' where id='" + id + "'";

		g_sendhead.bsql = 1;
		if (g_bAllBranch)
		{
			g_branchip = GetIP(branch);
			g_pMainWnd->OnDisconnect();
			g_branchname = branch;
			g_bBranchModify = 1;
			g_pMainWnd->ProcessChatMessageRequest2(sql);
			g_pMainWnd->OnDisconnect();
			g_bBranchModify = 0;
			g_branchip = g_branchname = "";
		}
		else
			g_pMainWnd->ProcessChatMessageRequest2(sql);
		if (g_bSendOK == 0)return;
		if (g_bAllBranch == 0)
		{
			GetData();
		}
		else
		{
			for (int i = 0; i < m_List1array.GetSize(); i++)
			{
				if (id == m_List1array.ElementAt(i).ElementAt(1) && branch == m_List1array.ElementAt(i).ElementAt(0))
				{
					m_List1array.ElementAt(i).SetAt(4 + m_nAdd, status5);
					if (time10.IsEmpty())
						m_List1array.ElementAt(i).SetAt(5 + m_nAdd, g_date);
					FillGrid();
					break;
				}
			}
		}
		return;
	}
	if (srcdir.GetLength() < 4)
	{
		AfxMessageBox("请选择正确的您文件所在的目录!", MB_ICONSTOP);
		return;
	}
	if (oldstatus != "未设计")
	{
		CString str;
		str.Format("%s\r\n%s\r\n此单已导入过设计片, 确认您选中的照片没有导入过吗? 否则会覆盖原来的照片, 是否继续?", name, phone);
		if (AfxMessageBox(str, MB_YESNO | MB_ICONSTOP) != IDYES)
			return;
	}
	else
	{
		CString str;
		str.Format("%s\r\n%s\r\n确认您选中的照片与客户资料相符吗? 是否继续?", name, phone);
		if (AfxMessageBox(str, MB_YESNO | MB_ICONINFORMATION) != IDYES)
			return;
	}
	CStringArray array;
	CStringArray desarray;
	CStringArray dirarray;

	if (1)
	{
		// 1.获取源目录下的所有子目录;
		using namespace helper_coffs;
		ffsco o;
		o.dirs(1);
		o.find(LPCSTR(srcdir), LPCSTR("*.*"));
		ffsco::typeT coo;
		ffsco::typeT::iterator it;
		coo = o.co_dir();
		for (it = coo.begin(); coo.end() != it; it++)
		{
			str = (*it).c_str();
			if (FindArray(&dirarray, str) == -1)
			{
				dirarray.Add(str);
				if (str != dirarray.ElementAt(0))
				{
					str = savepath + str.Right(str.GetLength() - dirarray.ElementAt(0).GetLength());
					if (::CheckFolderFileExist(str) == 0)
						::CreateDirectory(str, NULL);
				}

			}
		}
	}
	if (1)
	{
		// 2.从每个子目录下查找所有的相片;
		for (int i = 0; i < dirarray.GetSize(); i++)
		{
			using namespace helper_coffs;
			ffsco o;
			o.dirs(0);
			o.find(LPCSTR(dirarray.ElementAt(i)), LPCSTR("*.jpg"));
			ffsco::typeT coo;
			ffsco::typeT::iterator it;
			coo = o.co_file();
			for (it = coo.begin(); coo.end() != it; it++)
			{
				str = (*it).c_str();
				array.Add(str);
				desarray.Add(savepath + dirarray.ElementAt(i).Right(dirarray.ElementAt(i).GetLength() - dirarray.ElementAt(0).GetLength()) + str.Right(str.GetLength() - str.ReverseFind('\\') - 1));
			}
		}
	}

	if (array.GetSize() == 0)return;

	//----------------------------------------------------------------------------------------------
	//----------------------------------------------------------------------------------------------
	// 导入设计的片;
	//----------------------------------------------------------------------------------------------
	//----------------------------------------------------------------------------------------------
	ImportPhoto dlg;
	dlg.m_branch = branch;			// 1.订单分店名;
	dlg.m_nphototype = 3;			// 2.未知;
	dlg.m_pArray = &array;			// 3.作为源的设计片路径集合;
	dlg.m_pDesArray = &desarray;	// 4.作为目标的设计片路径集合;
	dlg.m_savepath = savepath;		// 5.导出时的保存目录;
#ifdef ENTERPRISE_VERSION
	//	if(!g_branchname.IsEmpty ())
	{
		dlg.m_bSaveUploadTask = g_bSaveUploadTask4;
		dlg.m_sel = g_cominfoarraylocal.ElementAt(0).ElementAt(81);
		dlg.m_uploadtaskarray.Add(id + ";" + name);
		dlg.m_uploadtaskarray.Add("");
		dlg.m_uploadtaskarray.Add("");
		dlg.m_uploadtaskarray.Add("");
		dlg.m_uploadtaskarray.Add("");
		dlg.m_uploadtaskarray.Add("");
		dlg.m_uploadtaskarray.Add("");
		dlg.m_uploadtaskarray.Add("");
		dlg.m_uploadtaskarray.Add("");
		dlg.m_uploadtaskarray.Add("");
	}
#endif
	dlg.DoModal();


	CString status5;
	if (AfxMessageBox("客照是否全部设计完毕?", MB_YESNO | MB_ICONINFORMATION) == IDYES)
		status5 = "OK";
	else
		status5 = "设计中";

	CString sql;

	if (time10.IsEmpty())
		sql = "update dindan set status5='" + status5 + "',waiter4='" + g_user.name + "',time10='" + g_date + "' where id='" + id + "'";
	else
		sql = "update dindan set status5='" + status5 + "',waiter4='" + g_user.name + "' where id='" + id + "'";

	g_sendhead.bsql = 1;
	if (g_bAllBranch)
	{
		g_branchip = GetIP(branch);
		g_pMainWnd->OnDisconnect();
		g_branchname = branch;
		g_bBranchModify = 1;
		g_pMainWnd->ProcessChatMessageRequest2(sql);
		g_pMainWnd->OnDisconnect();
		g_bBranchModify = 0;
		g_branchip = g_branchname = "";
	}
	else
		g_pMainWnd->ProcessChatMessageRequest2(sql);
	if (g_bSendOK == 0)return;
	savepath += "ok";
	::DeleteFile(savepath);
	AfxMessageBox("导入客照成功!", MB_ICONINFORMATION);

	if (g_bAllBranch == 0)
	{
		GetData();
	}
	else
	{
		for (int i = 0; i < m_List1array.GetSize(); i++)
		{
			if (id == m_List1array.ElementAt(i).ElementAt(1) && branch == m_List1array.ElementAt(i).ElementAt(0))
			{

				m_List1array.ElementAt(i).SetAt(4 + m_nAdd, status5);
				if (time10.IsEmpty())
					m_List1array.ElementAt(i).SetAt(5 + m_nAdd, g_date);
				m_List1array.ElementAt(i).SetAt(13 + m_nAdd, g_user.name);
				FillGrid();
				break;
			}
		}
	}
}

// Jeff:选设计版按钮;
void DesignFrom::OnBUTshowphoto() //Jeff:选设计版按钮;
{
	// TODO: Add your control notification handler code here
	POSITION pos;
	pos = m_List1.GetFirstSelectedItemPosition();
	if (pos == NULL)
	{
		AfxMessageBox("请先选中您要查看的定单!", MB_ICONINFORMATION);
		return;
	}
	int iItem = m_List1.GetNextSelectedItem(pos);
	CString status = m_List1.GetItemText(iItem, 4);
	CString id = m_List1.GetItemText(iItem, 0);
	CString status2 = m_List1.GetItemText(iItem, 5);

	ChoosePhotoSkin2 dlg;	// 选设计对话框;
	dlg.m_mode2 = 1;
	dlg.SetLiaPath("3.lia");
	dlg.m_strOrderNumber = id;
	dlg.m_path = g_path3 + "\\";
	dlg.m_path += id;
	dlg.m_path += "\\";
	//AfxMessageBox(dlg.m_path);//Jeff Box;
	dlg.DoModal();
	g_bInSkin = 0;

	//	printf("Jeff:ChoosePhotoSkin2::m_id=%s\n ChoosePhotoSkin2::m_path=%s\n ChoosePhotoSkin2::m_mode\n\n",dlg.m_id,dlg.m_path,dlg.m_mode);// Jeff Printf;
	for (int i = 0; i < m_List1array.GetSize(); i++)
	{
		if (id == m_List1array.ElementAt(i).ElementAt(0))
		{
			m_List1array.ElementAt(i).SetAt(10, dlg.m_bz3);
			m_List1array.ElementAt(i).SetAt(6, dlg.m_status8);
			m_List1array.ElementAt(i).SetAt(9, dlg.m_time5);
			if (dlg.m_status8 != "OK")
				m_List1array.ElementAt(i).SetAt(4, "设计中");
			else
				m_List1array.ElementAt(i).SetAt(4, "OK");
			FillGrid();
			break;
		}
	}
}

void DesignFrom::OnButton1()	// 查询 按钮;
{
	UpdateData();
	m_filter.TrimLeft();
	m_filter.TrimRight();
	FillGrid();
}

// 已选未设计 按钮; "已选未设计"命名不合理，不知是"已选片OK未设计"还是"已精修未设计"，意义待定
void DesignFrom::OnButton2()	// 已精修未设计 按钮;
{
	UpdateData();
	m_filter.TrimLeft();
	m_filter.TrimRight();
	FillGrid(1);
}

void DesignFrom::OnItemchangedList2(NMHDR* pNMHDR, LRESULT* pResult)
{
	NM_LISTVIEW* pNMListView = (NM_LISTVIEW*)pNMHDR;
	POSITION pos;
	pos = m_List1.GetFirstSelectedItemPosition();
	if (pos == NULL)
	{
		return;
	}
	int iItem = m_List1.GetNextSelectedItem(pos);
	//	CString waiter4=m_List1.GetItemText (iItem, 11);
	if (IsHasRights2new(7) || IsHasRights2new(49))
	{
		GetDlgItem(IDC_BUTimportphoto)->EnableWindow(1);
		//	GetDlgItem(IDC_BUTimportphoto2)->EnableWindow(1);
	}
	else
	{
		GetDlgItem(IDC_BUTimportphoto)->EnableWindow(0);
		//	GetDlgItem(IDC_BUTimportphoto2)->EnableWindow(0);
	}

	/*	if(waiter4.IsEmpty ()  && IsHasRights2new(7)  || IsHasRights2new(49) )
	{
	GetDlgItem(IDC_BUTimportphoto)->EnableWindow(1);
	GetDlgItem(IDC_BUTimportphoto2)->EnableWindow(1);
	}
	else if(waiter4==g_user.name && IsHasRights2new(7)  )
	{
	GetDlgItem(IDC_BUTimportphoto)->EnableWindow(1);
	GetDlgItem(IDC_BUTimportphoto2)->EnableWindow(1);
	}
	else
	{
	GetDlgItem(IDC_BUTimportphoto)->EnableWindow(0);
	GetDlgItem(IDC_BUTimportphoto2)->EnableWindow(0);
	}*/
	*pResult = 0;
}

void DesignFrom::OnBUTimportphoto2()	// 查看 按钮;
{
	POSITION pos;
	pos = m_List1.GetFirstSelectedItemPosition();
	if (pos == NULL)
	{
		AfxMessageBox("请先选中您要查看的定单!", MB_ICONINFORMATION);
		return;
	}
	int iItem = m_List1.GetNextSelectedItem(pos);
	CString branch;
	CString id = m_List1.GetItemText(iItem, 0 + m_nAdd);
	if (g_bAllBranch)
		branch = m_List1.GetItemText(iItem, 0);
	CString name = m_List1.GetItemText(iItem, 1 + m_nAdd) + "," + m_List1.GetItemText(iItem, 2 + m_nAdd);
	name.TrimLeft(",");
	name.TrimRight(",");
	name = "客人:" + name;
	ShowPic dlg;
	dlg.m_id = id;
	dlg.m_name = name;
	dlg.m_name2 = m_List1.GetItemText(iItem, 1 + m_nAdd) + m_List1.GetItemText(iItem, 2 + m_nAdd);

	// 设计要求（原列10）
	dlg.remark = m_List1.GetItemText(iItem, 11 + m_nAdd);

	dlg.m_mode = 5;
	if (g_bAllBranch)
	{
		dlg.m_branch = branch;
		CString branchpath = GetBranchPhotoPath(branch);
		dlg.m_path = g_path3 + branchpath + "\\";
	}
	else
		dlg.m_path = g_path3 + "\\";
	dlg.m_path += id;
	dlg.m_path += "\\";
	dlg.DoModal();
}

void DesignFrom::OnBUTimportphoto3()	// 导出 (设计好的片) 按钮;
{
	if (IsHasRights2new(12) == 0)return;

	POSITION pos;
	pos = m_List1.GetFirstSelectedItemPosition();
	if (pos == NULL)
	{
		AfxMessageBox("请先选中您要导出片的定单!", MB_ICONINFORMATION);
		return;
	}
	int iItem = m_List1.GetNextSelectedItem(pos);
	CString id = m_List1.GetItemText(iItem, 0 + m_nAdd);
	CString branch;
	if (g_bAllBranch)
		branch = m_List1.GetItemText(iItem, 0);

	CString path;
	if (g_bAllBranch)
	{
		CString branchpath = GetBranchPhotoPath(branch);
		path = g_path3 + branchpath + "\\";
	}
	else
		path = g_path3 + "\\";
	path += id;
	path += "\\";

	CStringArray array;

	CString dir;
	GetSavePath(dir);
	if (dir.IsEmpty())
	{
		return;
	}
	CString name1 = m_List1.GetItemText(iItem, 1 + m_nAdd);
	CString name2 = m_List1.GetItemText(iItem, 2 + m_nAdd);
	CString remark = m_List1.GetItemText(iItem, 11 + m_nAdd);	// 设计要求，原列10

	dir.TrimRight('\\');
	dir += "\\";
	dir += id;
	dir += g_branchname;
	if (g_bAllBranch)
	{
		if (GetBranchPhotoPath(branch) != "")
			dir += branch;
	}
	dir += name1;
	dir += name2;
	dir += "设计好的片";
	dir += "\\";
	::CreateDirectory(dir, NULL);

	CStringArray desarray;
	CStringArray dirarray;

	CString savepath = dir;
	CString str;
	if (1)
	{
		using namespace helper_coffs;
		ffsco o;
		o.dirs(1);
		o.find(LPCSTR(path), LPCSTR("*.*"));
		ffsco::typeT coo;
		ffsco::typeT::iterator it;
		coo = o.co_dir();
		for (it = coo.begin(); coo.end() != it; it++)
		{
			str = (*it).c_str();
			if (FindArray(&dirarray, str) == -1)
			{
				dirarray.Add(str);
				if (str != dirarray.ElementAt(0))
				{
					str = savepath + str.Right(str.GetLength() - dirarray.ElementAt(0).GetLength());
					if (::CheckFolderFileExist(str) == 0)
						::CreateDirectory(str, NULL);
				}
			}
		}
	}
	if (1)
	{
		for (int i = 0; i < dirarray.GetSize(); i++)
		{
			using namespace helper_coffs;
			ffsco o;
			o.dirs(0);
			o.find(LPCSTR(dirarray.ElementAt(i)), LPCSTR("*.jpg"));
			ffsco::typeT coo;
			ffsco::typeT::iterator it;
			coo = o.co_file();
			for (it = coo.begin(); coo.end() != it; it++)
			{
				str = (*it).c_str();
				if (str.GetAt(str.ReverseFind('\\') + 1) == 's')continue;
				if (str.GetAt(str.ReverseFind('\\') + 1) == 'm')continue;
				array.Add(str);
				desarray.Add(savepath + dirarray.ElementAt(i).Right(dirarray.ElementAt(i).GetLength() - dirarray.ElementAt(0).GetLength()) + str.Right(str.GetLength() - str.ReverseFind('\\') - 1));
			}
		}
	}

	if (array.GetSize() == 0)
	{
		AfxMessageBox("此单未导片!", MB_ICONINFORMATION);
		return;
	}

	CStdioFile fp;
	fp.Open(dir + "客户要求.txt", CFile::modeCreate | CFile::modeWrite);
	fp.WriteString(remark);
	fp.Close();

	CCompressOption comoptdlg;
	comoptdlg.DoModal();

	//----------------------------------------------------------------------------------------------
	//----------------------------------------------------------------------------------------------
	// 导出设计好片;
	//----------------------------------------------------------------------------------------------
	//----------------------------------------------------------------------------------------------
	ImportPhoto dlg;
	dlg.m_nOutputSize = comoptdlg.m_nsize;	// 1.导出设计好的片的尺寸;
	dlg.m_mode = 1;							// 2.未知;
	dlg.m_pArray = &array;					// 3.作为导出时的源设计片路径集合;
	dlg.m_pDesArray = &desarray;			// 4.作为导出时的目标设计片路径集合;
	dlg.m_savepath = dir;					// 5.导出设计片时的保存路径;
	dlg.DoModal();
	AfxMessageBox("导片成功!", MB_ICONINFORMATION);

	//	CString str;
	str = " 导出设计片 ";
	str += "客人:";
	str += name1 + name2 + id;

	WriteLog(_T("普通日志"), _T("导出设计片"), g_user.name, str);
}

void DesignFrom::OnClickList2(NMHDR* pNMHDR, LRESULT* pResult)
{
	POSITION pos;
	pos = m_List1.GetFirstSelectedItemPosition();
	if (pos == NULL)return;
	int iItem = m_List1.GetNextSelectedItem(pos);
	g_id = m_List1.GetItemText(iItem, 0 + m_nAdd);
	*pResult = 0;
}

// 需要处理更换分隔符造成的问题;
// 已处理分隔符问题;
void DesignFrom::OnButton3()	// 导出选设计 按钮;
{
	if (IsHasRights2new(12) == 0)return;

	UpdateData();
	POSITION pos;
	pos = m_List1.GetFirstSelectedItemPosition();
	if (pos == NULL)
	{
		AfxMessageBox("请先选中您要导片的定单!", MB_ICONINFORMATION);
		return;
	}
	int iItem = m_List1.GetNextSelectedItem(pos);


	CString id = m_List1.GetItemText(iItem, 0 + m_nAdd);
	CString branch;
	if (g_bAllBranch)
		branch = m_List1.GetItemText(iItem, 0);

	CString name1 = m_List1.GetItemText(iItem, 1 + m_nAdd);
	CString name2 = m_List1.GetItemText(iItem, 2 + m_nAdd);

#ifdef CHILD_VERSION
	CString filter = "id='" + id + "';id='" + id + "';id='" + id + "' and name<>'入册' and name<>'入底'";
#else
	CString filter = "id='" + id + "';id='" + id + "';id='" + id + "' and kind<>'2' and name<>'入册' and name<>'入底'";
#endif

	g_sendhead.bsql = 0;
	g_sendhead.code[0] = 50;
	g_sendhead.code[1] = 11;
	g_sendhead.code[2] = 56;
	g_sendhead.tabcount = 3;
	if (g_bAllBranch)
	{
		g_branchip = GetIP(branch);
		g_pMainWnd->OnDisconnect();
		g_branchname = branch;
		g_bBranchModify = 1;
		g_pMainWnd->ProcessChatMessageRequest2(filter);
		g_pMainWnd->OnDisconnect();
		g_bBranchModify = 0;
		g_branchip = g_branchname = "";
	}
	else
		g_pMainWnd->ProcessChatMessageRequest2(filter);
	if (g_bSendOK == 0)return;
	CArray<CStringArray, CStringArray>sparray;
	CArray<CStringArray, CStringArray>sparray2;
	DataToArray(&sparray, &g_List1array, &sparray2);

	CString path;
	if (g_bAllBranch)
	{
		CString branchpath = GetBranchPhotoPath(branch);
		path = g_path3 + branchpath + "\\";
	}
	else
		path = g_path3 + "\\";

	path += id;
	path += "\\";
	////////////////////////////////////////
	CString str, spname;
	CStringArray noarray;
	CStringArray spnamearray;

	int i = 0;
	for ( i = 0; i < sparray.GetSize(); i++)
	{
		str = sparray.ElementAt(i).ElementAt(8);
		spname = sparray.ElementAt(i).ElementAt(5);
		GetNo(str, noarray);
	}
	if (noarray.GetSize() == 0)
	{
		AfxMessageBox("此单未选设计版!", MB_ICONINFORMATION);
		return;
	}

	spnamearray.SetSize(noarray.GetSize());
	for (i = 0; i < noarray.GetSize(); i++)
	{
		str = noarray.ElementAt(i);
		spnamearray.SetAt(i, GetSelName2(str, sparray));
	}

	CString dir;
	GetSavePath(dir);
	if (dir.IsEmpty())return;
	dir.TrimRight('\\');
	dir += "\\";
	dir += id;
	dir += g_branchname;
	if (g_bAllBranch)
	{
		if (GetBranchPhotoPath(branch) != "")
			dir += branch;
	}
	dir += name1;
	dir += name2;
	dir += "选设计";
	dir += "\\";

	CStringArray array;
	CStringArray spnamearray2;
	CString src, des;


	for (i = 0; i < noarray.GetSize(); i++)
	{
		src.Format("%s%s.jpg", path, noarray.ElementAt(i));
		if (PathFileExists(src))
		{
			array.Add(src);
			src = spnamearray.ElementAt(i);
			spnamearray2.Add(spnamearray.ElementAt(i));
		}
		else
			AfxMessageBox("未找到设计版:" + src.Right(src.GetLength() - src.ReverseFind('\\') - 1), MB_ICONINFORMATION);
	}

	::CreateDirectory(dir, NULL);
	//----------------------------------------------------------------------------------------------
	//----------------------------------------------------------------------------------------------
	// 导出选设计的片;
	//----------------------------------------------------------------------------------------------
	//----------------------------------------------------------------------------------------------
	ImportPhoto dlg;
	dlg.m_mode = 1;					// 1.未知;
	dlg.m_bOrigin = 1;				// 2.未知;
	dlg.m_pArray = &array;			// 3.作为导出源的选好的设计片路径集合;
	dlg.m_pArray2 = &spnamearray2;	// 4.作为导出目标的选好的设计片路径集合;
	dlg.m_savepath = dir;			// 5.保存选好的设计片的目录;
	dlg.DoModal();
	//////////////
	if (g_List1array.GetSize())
	{
		CStdioFile fp;
		fp.Open(dir + "客户要求.txt", CFile::modeCreate | CFile::modeWrite);
		fp.WriteString("选设计要求:\n");
		fp.WriteString(g_List1array.ElementAt(0).ElementAt(57));
		fp.WriteString("\n");
		fp.WriteString("\n");
		fp.WriteString("设计版替换照片:\n");
		CString replace = g_List1array.ElementAt(0).ElementAt(59);
		if (!replace.IsEmpty())
		{
			replace.Delete(0, 1);
			replace.Replace("$", "\n");
		}
		fp.WriteString(replace);
		fp.WriteString("\n");
		fp.WriteString("\n");
		fp.WriteString("订单要求:\n");
		fp.WriteString(g_List1array.ElementAt(0).ElementAt(38));


		fp.WriteString("\n");
		fp.WriteString("\n");
		fp.WriteString("客人产品:\n");

		CString str;
		str = "产品名称";
		FillLength(str, 20);
		str += "数量";
		FillLength(str, 30);
		str += "加急";
		FillLength(str, 40);
		str += "取件日期";
		FillLength(str, 50);
		fp.WriteString(str);
		fp.WriteString("\n");
		for (int i = 0; i < sparray2.GetSize(); i++)
		{
			str.Empty();
			str = sparray2.ElementAt(i).ElementAt(0);
			FillLength(str, 20);
			str += sparray2.ElementAt(i).ElementAt(1);
			FillLength(str, 30);
			str += sparray2.ElementAt(i).ElementAt(18);
			FillLength(str, 40);
			str += sparray2.ElementAt(i).ElementAt(19);
			FillLength(str, 50);
			fp.WriteString(str);
			fp.WriteString("\n");
		}
		fp.Close();
	}
	//////////////
	AfxMessageBox("导片成功!", MB_ICONINFORMATION);

	//	CString str;
	str = " 导出选设计片 ";
	str += "客人:";
	str += name1 + name2 + id;

	WriteLog(_T("普通日志"), _T("导出选设计片"), g_user.name, str);
}

void DesignFrom::HidePrice()
{
#ifdef LKAY_VERSION
	if (IsHasRights2new(31))return;
	for (int i = 0; i < m_List1array.GetSize(); i++)
	{
		m_List1array.ElementAt(i).SetAt(14 + m_nAdd, "***");
		m_List1array.ElementAt(i).SetAt(15 + m_nAdd, "***");
		m_List1array.ElementAt(i).SetAt(16 + m_nAdd, "***");
		m_List1array.ElementAt(i).SetAt(17 + m_nAdd, "***");
	}
#else
	if (IsHasRights2new(31))return;
	for (int i = 0; i < m_List1array.GetSize(); i++)
	{
		m_List1array.ElementAt(i).SetAt(16 + m_nAdd, "***");
		m_List1array.ElementAt(i).SetAt(17 + m_nAdd, "***");
	}
#endif
}

void DesignFrom::OnBtnsearchfilter()	// 条件查询 按钮;
{
	SearchFilter dlg;
	dlg.m_mode = 4;
	if (dlg.DoModal() == IDOK)FillGrid();
	g_bSearchFilter = 0;
}

void DesignFrom::GetData()
{
	if (g_bAllBranch == 0)
	{
		if (g_bShowOK == 0)
		{
#ifdef LKAY_VERSION
			CString filter = "status3='未取' and (dindantype<>'意向客户' or dindantype is null)";
#else
			CString filter = "status3='未取'";
#endif
			g_sendhead.bsql = 0;
			g_sendhead.code[0] = 31;
			g_sendhead.tabcount = 1;
			g_pMainWnd->ProcessChatMessageRequest2(filter);
			if (g_bSendOK == 0)return;
		}
		else
		{
			g_sendhead.bsql = 0;
			g_sendhead.code[0] = 31;
			g_sendhead.tabcount = 1;
#ifdef LKAY_VERSION	
			CString filter = "dindantype<>'意向客户' or dindantype is null";
			g_pMainWnd->ProcessChatMessageRequest2(filter);
#else
			g_pMainWnd->ProcessChatMessageRequest2(1);
#endif
			if (g_bSendOK == 0)return;
		}
		DataToArray(&m_List1array);
	}
	else
	{
		//////////////数据汇总
		m_List1array.RemoveAll();
		CString branch;
		for (int i = -1; i < g_brancharray.GetSize() - 1; i++)
		{
			if (i != -1)
			{
				branch = g_brancharray.ElementAt(i).ElementAt(0);
				g_branchip = g_brancharray.ElementAt(i).ElementAt(1);
				g_pMainWnd->OnDisconnect();
				g_branchname = branch;
				g_bBranchModify = 1;
			}
			else
				branch = g_brancharray.ElementAt(g_brancharray.GetSize() - 1).ElementAt(0);

			if (g_bShowOK == 0)
			{
				CString filter = "status3='未取'";
				g_sendhead.bsql = 0;
				g_sendhead.code[0] = 31;
				g_sendhead.tabcount = 1;
				g_pMainWnd->ProcessChatMessageRequest2(filter);
				if (g_bSendOK == 0)continue;
			}
			else
			{
				g_sendhead.bsql = 0;
				g_sendhead.code[0] = 31;
				g_sendhead.tabcount = 1;
				g_pMainWnd->ProcessChatMessageRequest2(1);
				if (g_bSendOK == 0)continue;
			}
			CArray<CStringArray, CStringArray>List1array;
			DataToArray(&List1array);
			int size = m_List1array.GetSize();
			for (int j = 0; j < List1array.GetSize(); j++)
			{
				size++;
				m_List1array.SetSize(size, 1);
				size--;
				m_List1array.ElementAt(size).Copy(List1array.ElementAt(j));
				m_List1array.ElementAt(size).InsertAt(0, branch);
				size++;
			}
		}
		g_pMainWnd->OnDisconnect();
		g_bBranchModify = 0;
		g_branchip = g_branchname = "";
	}
	m_List1arraybak.SetSize(m_List1array.GetSize(), 1);
	for (int ii = 0; ii < m_List1array.GetSize(); ii++)
	{
		m_List1arraybak.ElementAt(ii).Copy(m_List1array.ElementAt(ii));

		// 设计要求;原列10
		if (m_List1array.ElementAt(ii).ElementAt(11).GetLength() > 256)
		{
			m_List1array.ElementAt(ii).SetAt(11, m_List1array.ElementAt(ii).ElementAt(11).Left(256) + "...");
		}
	}
	HidePrice();
	FillGrid();
}

void DesignFrom::OnBUTprint3()	// 更新数据 按钮;
{
	GetData();
}